Hello,
just booted it and:
cdrecord -scanbus
Cdrecord 1.11a26 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.6'
scsibus0:
cdrecord: Warning: controller returns wrong size for CD capabilities page.
0,0,0 0) 'PIONEER ' 'DVD-ROM DVD-103 ' '1.16' Removable CD-ROM
And I can mount cdrom again with it!!!
Even if at boot:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALL CX13.6A, ATA DISK drive
Debug: sleeping function called from illegal context at mm/slab.c:1374
Call Trace: [<c01376db>] [<c01f0745>] [<c01f07d7>] [<c0202409>] [<c0209e00>] [<c020263d>] [<c020a1b0>] [<c0202ab8>] [<c02022f4>] [<c0214070>] [<c0201626>] [<c010507a>] [<c0105040>] [<c0105665>]
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
Debug: sleeping function called from illegal context at mm/slab.c:1374
Call Trace: [<c01376db>] [<c01f0745>] [<c01f07d7>] [<c0202409>] [<c0209e00>] [<c020263d>] [<c020a1b0>] [<c0202ab8>] [<c02022f4>] [<c021408f>] [<c0201626>] [<c010507a>] [<c0105040>] [<c0105665>]
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 26760384 sectors (13701 MB) w/418KiB Cache, CHS=1665/255/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2
ide-floppy driver 0.99.newide
hdd: 244766kB, 489532 blocks, 512 sector size
hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
hdd: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
hdd: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
/dev/ide/host0/bus1/target1/lun0: unknown partition table
/dev/ide/host0/bus1/target1/lun0: unknown partition table
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
ide-scsi: The scsi wants to send us more data than expected - discarding data
ide-scsi: transferred 47 of 48 bytes
Vendor: PIONEER Model: DVD-ROM DVD-103 Rev: 1.16
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Great!!!
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Oct 15 2002 - 22:00:36 EST