* Remove cli()/restore()
* Use time_after() macro for jiffie wrap
* call timer_init() before actual timer usage
Please apply
Paul Fulghum
paulkf@microgate.com
--- linux-2.5.41/drivers/char/synclinkmp.c Thu Oct 10 09:56:24 2002
+++ linux-2.5.41-mg/drivers/char/synclinkmp.c Thu Oct 10 09:56:06 2002
@@ -1,5 +1,5 @@
/*
- * $Id: synclinkmp.c,v 4.4 2002/04/22 16:05:41 paulkf Exp $
+ * $Id: synclinkmp.c,v 4.6 2002/10/10 14:50:47 paulkf Exp $
*
* Device driver for Microgate SyncLink Multiport
* high speed multiprotocol serial adapter.
@@ -503,7 +503,7 @@
MODULE_PARM(dosyncppp,"1-" __MODULE_STRING(MAX_DEVICES) "i");
static char *driver_name = "SyncLink MultiPort driver";
-static char *driver_version = "$Revision: 4.4 $";
+static char *driver_version = "$Revision: 4.6 $";
static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
static void synclinkmp_remove_one(struct pci_dev *dev);
@@ -1204,7 +1204,7 @@
schedule_timeout(char_time);
if (signal_pending(current))
break;
- if (timeout && ((orig_jiffies + timeout) < jiffies))
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
} else {
@@ -1215,7 +1215,7 @@
schedule_timeout(char_time);
if (signal_pending(current))
break;
- if (timeout && ((orig_jiffies + timeout) < jiffies))
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
}
@@ -2605,18 +2605,11 @@
info->pending_bh = 0;
- init_timer(&info->tx_timer);
- info->tx_timer.data = (unsigned long)info;
- info->tx_timer.function = tx_timeout;
-
/* program hardware for current parameters */
reset_port(info);
change_params(info);
- init_timer(&info->status_timer);
- info->status_timer.data = (unsigned long)info;
- info->status_timer.function = status_timeout;
info->status_timer.expires = jiffies + jiffies_from_ms(10);
add_timer(&info->status_timer);
@@ -3304,12 +3297,12 @@
printk("%s(%d):%s block_til_ready() before block, count=%d\n",
__FILE__,__LINE__, tty->driver.name, info->count );
- save_flags(flags); cli();
+ spin_lock_irqsave(&info->lock, flags);
if (!tty_hung_up_p(filp)) {
extra_count = 1;
info->count--;
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->lock, flags);
info->blocked_open++;
while (1) {
@@ -3772,6 +3765,14 @@
info->bus_type = MGSL_BUS_TYPE_PCI;
info->irq_flags = SA_SHIRQ;
+ init_timer(&info->tx_timer);
+ info->tx_timer.data = (unsigned long)info;
+ info->tx_timer.function = tx_timeout;
+
+ init_timer(&info->status_timer);
+ info->status_timer.data = (unsigned long)info;
+ info->status_timer.function = status_timeout;
+
/* Store the PCI9050 misc control register value because a flaw
* in the PCI9050 prevents LCR registers from being read if
* BIOS assigns an LCR base address with bit 7 set.
@@ -3959,15 +3960,13 @@
SLMP_INFO *tmp;
printk("Unloading %s %s\n", driver_name, driver_version);
- save_flags(flags);
- cli();
+
if ((rc = tty_unregister_driver(&serial_driver)))
printk("%s(%d) failed to unregister tty driver err=%d\n",
__FILE__,__LINE__,rc);
if ((rc = tty_unregister_driver(&callout_driver)))
printk("%s(%d) failed to unregister callout driver err=%d\n",
__FILE__,__LINE__,rc);
- restore_flags(flags);
info = synclinkmp_device_list;
while(info) {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Oct 15 2002 - 22:00:38 EST