On Mon, Oct 14, 2002 at 07:20:04PM -0700, Feldman, Scott wrote:
> > Here is the lspci information, both -x and -vv. This is with
> > two of the e1000 single-port NICS side-by-side. I have also
> > strapped a P-IV CPU fan on top of the two cards to blow some
> > air over them....running tests now to see if that actually
> > helps anything. If it does, I'll be sure to send you a picture :)
>
> Ben, I checked the datasheet for the part shown in the lspci dump, and it
> shows an operating temperature of 0-55 degrees C. You said you measured 50
> degrees C, so you're within the safe range. Did the fans help?
The thermometer he used likely showed a much lower temperature than what was
actually on the die. 5-10 C more are not unlikely. It's hard to measure chip
temperatures accurately without an on die thermal diode or special kit.
So I would expect that when an external normal thermometer showed 50C
it was already operating out of spec.
-Andi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Oct 15 2002 - 22:00:53 EST