Hello all,
I've got a little problem here with my network card (cardbus) - using the
Vortex driver after I've entered suspend on my laptop (dell latitude) and
revive the machine from it.
After reviving the machine, the dulplex mode and mbits are wrongly
autodetected. I'm connected to a 100mbit/FD network, and the card goes back
to the default state of 10mbit/HD. Disconnecting/reconnecting the cable does
not help.
If I remove the module from the kernel, and re-load it, the system hangs
solid.
After reviving the pc also 'stalls' now and again, approximatively every 15-20
seconds, for 1-2 seconds.
In my kernel logs i get these messages:
-------------------------
Oct 15 11:16:05 laptop kernel: eth0: command 0x5800 did not complete!
Status=0xffff
Oct 15 11:16:05 laptop kernel: eth0: command 0x2804 did not complete!
Status=0xffff
Oct 15 11:16:21 laptop kernel: eth0: command 0x3002 did not complete!
Status=0xffff
Oct 15 11:16:44 laptop last message repeated 12 times
Oct 15 11:16:46 laptop kernel: Debug: sleeping function called from illegal
context at slab.c:1374
Oct 15 11:16:46 laptop kernel: eth0: command 0x3002 did not complete!
Status=0xffff
Oct 15 11:16:48 laptop last message repeated 2 times
Oct 15 11:16:58 laptop kernel: eth0: transmit timed out, tx_status ff status
ffff.
Oct 15 11:16:58 laptop kernel: diagnostics: net ffff media ffff dma ffffffff
fifo ffff
Oct 15 11:16:58 laptop kernel: eth0: Transmitter encountered 16 collisions --
network cable problem?
Oct 15 11:16:58 laptop kernel: eth0: Interrupt posted but not delivered -- IRQ
blocked by another device?
Oct 15 11:16:58 laptop kernel: Flags; bus-master 1, dirty 0(0) current 16(0)
Oct 15 11:16:58 laptop kernel: Transmit list ffffffff vs. c03b6200.
Oct 15 11:16:58 laptop kernel: eth0: command 0x3002 did not complete!
Status=0xffff
Oct 15 11:16:58 laptop kernel: 0: @c03b6200 length 800000ff status 000000ff
Oct 15 11:16:58 laptop kernel: 1: @c03b62a0 length 800000f9 status 000000f9
Oct 15 11:16:58 laptop kernel: 2: @c03b6340 length 800000ff status 000000ff
Oct 15 11:16:58 laptop kernel: 3: @c03b63e0 length 8000005c status 0000005c
Oct 15 11:16:58 laptop kernel: 4: @c03b6480 length 8000005c status 0000005c
Oct 15 11:16:58 laptop kernel: 5: @c03b6520 length 8000005c status 0000005c
Oct 15 11:16:58 laptop kernel: 6: @c03b65c0 length 8000005c status 0000005c
Oct 15 11:16:59 laptop kernel: 7: @c03b6660 length 800000e7 status 000000e7
Oct 15 11:16:59 laptop kernel: 8: @c03b6700 length 800000e7 status 000000e7
Oct 15 11:16:59 laptop kernel: 9: @c03b67a0 length 800000e7 status 000000e7
Oct 15 11:17:00 laptop kernel: 10: @c03b6840 length 800000e7 status
000000e7
Oct 15 11:17:00 laptop kernel: 11: @c03b68e0 length 800000e7 status
000000e7
Oct 15 11:17:00 laptop kernel: 12: @c03b6980 length 8000006e status
0000006e
Oct 15 11:17:00 laptop kernel: 13: @c03b6a20 length 8000006e status
0000006e
Oct 15 11:17:00 laptop kernel: 14: @c03b6ac0 length 8000006e status
8000006e
Oct 15 11:17:00 laptop kernel: 15: @c03b6b60 length 8000006e status
8000006e
Oct 15 11:17:00 laptop kernel: eth0: command 0x5800 did not complete!
Status=0xffff
Oct 15 11:17:13 laptop kernel: eth0: transmit timed out, tx_status ff status
ffff.
Oct 15 11:17:13 laptop kernel: diagnostics: net ffff media ffff dma ffffffff
fifo ffff
Oct 15 11:17:13 laptop kernel: eth0: Transmitter encountered 16 collisions --
network cable problem?
Oct 15 11:17:13 laptop kernel: eth0: Interrupt posted but not delivered -- IRQ
blocked by another device?
-------------------------
over and over again (with different numbers), until i reboot the machine.
Networkconnection never gets established.
Card:
06:00.0 Ethernet controller: 3Com Corporation 3c575 [Megahertz] 10/100 LAN
CardBus (rev 01)
Subsystem: 3Com Corporation 3C575 Megahertz 10/100 LAN Cardbus PC Card
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 4800 [size=128]
Region 1: Memory at 11000000 (32-bit, non-prefetchable) [size=128]
Region 2: Memory at 11000080 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 10c00000 [size=128K]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
DK
-- PL/1, "the fatal disease", belongs more to the problem set than to the solution set. -- E. W. Dijkstra- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Oct 15 2002 - 22:00:54 EST