On Fri, 2002-10-18 at 13:02, Eric W. Biederman wrote:
> In bug reports please include the serial console output of
> kexec kexec_test. kexec_test exercises most of the interesting code
> paths that are needed to load a kernel with lots of debugging print
> statements, so hangs can easily be detected.
Hi again, Eric.
Thanks for sending out pointers to a fresh batch of code.
I applied your patch cleanly to 2.5.44, and tried it on one of the two
"troublesome" systems that I have used in the past. I had to make one
unrelated change to the SCSI subsystem to fix a problem with a hang
during an ordinary reboot.
Symptoms:
kexec bzImage makes it all the way down to the indirect call at the very
bottom of machine_kexec() before the system appears to hang.
Debugging output from "kexec kexec_test":
# ./kexec ./kexec_test
kexecing image
kexec_test 1.1 starting...
eax: 0E1FB007 ebx: 00001078 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00000000 esp: 00000000 ebp: 00000000
idt: 00000000 C0000000
gdt: 00000000 C0000000
Switching descriptors.
Descriptors changed.
In real mode.
Interrupts enabled.
Base memory size: 0277
--> [ edited: long pause here ] <--
Can not A20 line.
E820 Memory Map.
000000000009DC00 @ 0000000000000000 type: 00000001
0000000000002400 @ 000000000009DC00 type: 00000002
0000000000020000 @ 00000000000E0000 type: 00000002
0000000027EED140 @ 0000000000100000 type: 00000001
0000000000010000 @ 0000000027FF0000 type: 00000002
0000000000002EC0 @ 0000000027FED140 type: 00000003
0000000001400000 @ 00000000FEC00000 type: 00000002
E801 Memory size: 0009F800
Mem88 Memory size: FFFF
Testing for APM.
APM test done.
A20 enabled
Interrupts disabled.
In protected mode.
Halting.
System info:
IBM eServer xSeries 220 Type 8645-2AX
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 799.962
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1576.96
% lspci
00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
00:01.0 VGA compatible controller: S3 Inc. Savage 4 (rev 04)
00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50)
00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04)
01:03.0 SCSI storage controller: Adaptec AIC-7892P U160/m (rev 02)
What other information can I provide?
Regards,
Andy
ps: if it helps, the OSDL CGL tree has bootimg and linux-2.4.18, and
that combination works (unless X is still running) on this system.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Oct 23 2002 - 22:00:56 EST