Ognen Duzlevski wrote:
> Hi,
>
> I have sent this question to the people listed in the parport
> kernel directory (the maintainers) but have yet not received a reply and
> I am not sure if this is exactly a linux-kernel question.
>
> I have a printer that worked fine under linux (redhat/lexmark 3200) for a
> long time, then I switched over to 2.4.18 and debian and it stopped
> working. I compiled the parport support into the kernel, I did that with
> 2.4.19, I did it also as modules, I tried 2.5.45, still won't work, not
> even a cat test.txt > /dev/lp0
>
> The dmesg shows that the printer is recognized correctly:
>
> Nov 9 13:06:32 gemelli kernel: parport0: PC-style at 0x378 (0x778)
> [PCSPP,TRISTATE]
> Nov 9 13:06:32 gemelli kernel: parport0: irq 5 detected
> Nov 9 13:06:34 gemelli kernel: parport0: Printer, Lexmark Lexmark 3200
> lp0: using parport0 (polling).
> lp0: console ready
>
> The BIOS has a ton of settings such as "auto" or "normal" - I have tried
> them all, tried forcing the DMA / IRQ from the BIOS and then feeding these
> values to parport_pc, still won't work. I have tried all combinations of
> Normal, ECP, ECP+EPP or EPP solely, won't work.
>
> I then installed vmware and windows nt as a guest OS, under the same
> kernels. I set up parport0 to be used by vmware and, it prints from
> Windows nt (so I know the printer is fully functional).
>
> Any ideas, help would be appreciated. Sorry if this is not the place to
> post the question but I have tried google, linux-printing.org, usenet to
> no avail.
>
> CHeers,
> Ognen
It sounds like a userspace problem. The information about this printer
I've found on the web shows it to be a GDI printer (ie. all the smarts
are in the software driver, not in the printer), which means sending
text to it will never print anything. You will need to check the
configuration of ghostscript or whatever userspace printer driver debian
is using.
-- Brian Gerst- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 15 2002 - 22:00:18 EST