Any help on diagnosing and fixing this bug that cropped up on my machine
after installing an unpatched 2.4.19 kernel would be greatly
appreciated. I haven't seen this particular VM bug addressed previously.
-Hal
[1.] One line summary of the problem:
System crash with kernel BUG at vmscan.c:355 after upgrade to kernel 2.4.19
[2.] Full description of the problem/report:
Almost three days after upgrading an older machine from 2.2.16 to 2.4.19
the machine crashed with the following error in the log:
Nov 12 06:37:47 ns kernel: kernel BUG at vmscan.c:355!
Nov 12 06:37:47 ns kernel: invalid operand: 0000
Nov 12 06:37:47 ns kernel: CPU: 0
The entries in the log indicate the BUG was recorded 1 minute after some
inetd entries (autorpm updates and an SMTP connection from crond). All
inetd entries after the kernel BUG message were signal 11's. After reboot
the machine went almost 2 days and then crashed with the same message:
Nov 14 04:06:19 ns kernel: kernel BUG at vmscan.c:355!
Nov 14 04:06:19 ns kernel: invalid operand: 0000
Nov 14 04:06:19 ns kernel: CPU: 0
No further logging after this until reboot.
[3.] Keywords (i.e., modules, networking, kernel):
kernel
bug
vmscan.c
[4.] Kernel version (from /proc/version):
Linux version 2.4.19 (gcc version 2.95.3 20010315 (release))
#2 Sat Nov 9 09:15:49 EST 2002
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
No oops available.
[6.] A small shell script or example program which triggers the
problem (if possible)
Although it has happened twice, I have not found a way to trigger the BUG
reproducibly.
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux 2.4.19 #2 Sat Nov 9 09:15:49 EST 2002 i686 unknown
Gnu C 2.95.3
Gnu make 3.78.1
util-linux 2.11l
mount 2.11l
modutils 2.4.10
e2fsprogs 1.25
pcmcia-cs 3.1.8
PPP 2.3.10
isdn4k-utils 3.1beta7
Linux C Library 2.1.3
Dynamic linker (ldd) 2.1.3
Procps 1.01
Net-tools 1.54
Console-tools 0.3.3
Sh-utils 2.0
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 1
model name : Pentium Pro
stepping : 7
cpu MHz : 199.435
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
bogomips : 398.13
[7.3.] Module information (from /proc/modules):
capcheck 1136 0 (unused)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
03c0-03df : vga+
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
f800-f8ff : Lite-On Communications Inc LNE100TX
f800-f8ff : tulip
fc00-fcff : Adaptec AHA-2940U/UW/D / AIC-7881U
ffa0-ffaf : Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
00000000-0009fbff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cc7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-0fffffff : System RAM
00100000-002700f6 : Kernel code
002700f7-00304b9f : Kernel data
ff000000-ff7fffff : Matrox Graphics, Inc. MGA 2064W [Millennium]
ffbeac00-ffbeacff : Lite-On Communications Inc LNE100TX
ffbeac00-ffbeacff : tulip
ffbeb000-ffbebfff : Adaptec AHA-2940U/UW/D / AIC-7881U
ffbeb000-ffbebfff : aic7xxx
ffbec000-ffbeffff : Matrox Graphics, Inc. MGA 2064W [Millennium]
fff80000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort+ >SERR- <PERR-
Latency: 32 set
00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] (rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 0 set
00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton
II] (p
rog-if 80 [Master])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Region 4: I/O ports at ffa0 [size=16]
00:0b.0 SCSI storage controller: Adaptec AIC-7881U
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 8 min, 8 max, 72 set, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at fc00 [disabled] [size=256]
Region 1: Memory at ffbeb000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0f.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W [Millennium]
(rev 01) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ffbec000 (32-bit, non-prefetchable) [size=16K]
Region 1: Memory at ff000000 (32-bit, prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:13.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
Subsystem: Netgear FA310TX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 32 set
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at f800 [size=256]
Region 1: Memory at ffbeac00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=256K]
[7.6.] SCSI information (from /proc/scsi/scsi)
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: Seagate Model: STT8000N Rev: 3.22
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 3605
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: IBM Model: DDRS-39130W Rev: S97B
Type: Direct-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
Modules Loaded capcheck
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 15 2002 - 22:00:35 EST