On Sun, Nov 17, 2002 at 10:50:00PM +0000, Alan Cox wrote:
> On Sun, 2002-11-17 at 19:47, Florian Lohoff wrote:
> >
> > Hi,
> > i am seeing a hang on boot on a Crusoe based Vaio C1MHP when enabling
> > the ALI IDE Driver:
> >
> > These are the last lines:
> >
> > Unform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 33Mhz system bus speed for PIO modes: override with idebus=xx
> > ALI15X3: IDE controller on PCI bus 00 dev 80
> > pci_irq-0293 [05] acpi_pci_irq_derive : Unable to derive IRQ for device 00:10.0
> > PCI: No IRQ known for interrupt pin A of device 00:10.0 - using IRQ 255
> > ALI15X3: chipset revision 196
> > ALI15X3: not 100% native mode: will probe irqs later
>
> Try it without the ACPI first. Let me know if that also hangs
It does - With acpi=off and acpi=off pci=biosirq (as mentioned in that
crash). I also tried the somewhere mentioned UDMA66 force (ide0=ata66
ide1=ata66) which does get over this point but fails to mount the root
filesystem with IDE errors.
Flo
-- Florian Lohoff flo@rfc822.org +49-5201-669912 Heisenberg may have been here.
This archive was generated by hypermail 2b29 : Sat Nov 23 2002 - 22:00:21 EST