Hello,
I have applied the patch sent today, but the kernel don't find my root
(aic7xxx), what I got is:
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<Adaptec 29160B Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
Vendor: IBM Model: DDRS-39130D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
(scsi0:A:15): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
(scsi0:A:15): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
Vendor: SEAGATE Model: ST336706LW Rev: 0108
Type: Direct-Access ANSI SCSI revision: 03
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
(scsi1:A:1): 10.000MB/s transfers (10.000MHz, offset 15)
Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R04
Type: CD-ROM ANSI SCSI revision: 02
(scsi1:A:2): 10.000MB/s transfers (10.000MHz, offset 8)
Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
(scsi1:A:3): 10.000MB/s transfers (10.000MHz, offset 8)
Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
(scsi1:A:4): 10.000MB/s transfers (10.000MHz, offset 15)
Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
SCSI device sda: drive cache: write through
SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
scsi0:A:15:0: Tagged Queuing enabled. Depth 253
SCSI device sdb: drive cache: write back
SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB)
/dev/scsi/host0/bus0/target15/lun0: p1 p2
Attached scsi disk sdb at scsi0, channel 0, id 15, lun 0
sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
sr2: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
sr3: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
While the diff against 2.4.45:
1,2c1,2
< SCSI device : drive cache: write through
< SCSI device : 17850000 512-byte hdwr sectors (9139 MB)
--- > SCSI device sda: drive cache: write through > SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB) 5,6c5,6 < SCSI device : drive cache: write back < SCSI device : 71687370 512-byte hdwr sectors (36704 MB) --- > SCSI device sdb: drive cache: write back > SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB) 11d10 < Attached scsi CD-ROM sr0 at scsi1, channel 0, id 1, lun 0 13d11 < Attached scsi CD-ROM sr1 at scsi1, channel 0, id 2, lun 0 15d12 < Attached scsi CD-ROM sr2 at scsi1, channel 0, id 3, lun 0 17d13 < Attached scsi CD-ROM sr3 at scsi1, channel 0, id 4, lun 0Should I try without the patch?
Thank you very much,
Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Nov 23 2002 - 22:00:24 EST