"Martin J. Bligh" <mbligh@aracnet.com> writes:
> > I suspect the hardware shutdown and start up logic for NUMAQ cpus
> > needs some special handling.
>
> Almost certainly ;-) One of the main things I do differently on boot
> is to use NMIs rather than the normal INIT/STARTUP sequence to bootstrap
> CPUs with .... thus they aren't as thoroughly reset. Things like clearing
> down the local APIC state (but NOT the LDR) and clearing down the IO-APICs
> will be especially important. I haven't looked at your code yet to see
> exactly what it does here though.
That part is in my x86kexec-hwfixes.diff I have a good first stab
at it that works on most x86 SMPs. But apparently not on NUMAQ.
> > Small steps. When I bypass the BIOS I need to get all of the information
> > the kernel normally would get from the BIOS from someplace else. Currently
> > you can use the "mem= " kernel command line parameters. Of you can dig the
> > /proc/iomem and /proc/meminfo and other places and get the BIOS's memory map.
> > There isn't a really good source, so I started with something that would work,
>
> > and I will work the user space tools up to something that works well.
> >
> > I will happily accept patches :)
>
> Sounds like we should just export back to you the value we parsed from
> the BIOS from the existing boot, no? I'll see if I can make you a patch
> to do that ...
Yep. But we currently don't export it cleanly...
Eric
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Nov 23 2002 - 22:00:28 EST