Re: bug in via-rhine network-driver (transmit timed out) Final Test-results

From: Kristof Sardemann (ksardem@linux01.gwdg.de)
Date: Wed Nov 20 2002 - 12:13:41 EST

Hi,

thanks for the good help - the card works really good now. =)
In the following I'll answer to all of your suggestions in this one
mail:

>Does booting with "noapic" on the kernel command line fix your problems?
Yes, it did.
(Although I don't understand why cause I have no smp-system ;-))

>Have you tried the 8139too driver? This driver is suppose to work
>too.
No, it didn't work in my tests.

>Try the linuxfet driver found here:
>http://www.viaarena.com/?PageID=87#ethernet
I took the driver for "Red Hat Linux 7.3 VT8231/VT8233/VT8235/VT6105
Fast Ethernet Controller" (07/23/2002 Ver 0.9) and compiled it on my
SuSE-8.1 - and it worked really good :)

Additional I found out, that booting with "acpi=off" also fixed the
problem - but this might be a specific problem of the
SuSE-8.1-Kernel.

>The hang could be caused by incomplete tx underrun handling, the
>linuxfet driver resets several registers after a tx underrun.
>Could you load the driver with debug=3? For example by adding 'options
>via-rhine debug=3' into your /etc/modules.conf?
To complete the test I'll send the detailed debug-messages tomorrow. 

--
Bye.
Kristof <ksardem@linux01.gwdg.de>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Sat Nov 23 2002 - 22:00:32 EST