Re: Problems Hot-Swapping IDE ATA drives

From: L P (plm@iname.com)
Date: Thu Nov 21 2002 - 05:34:37 EST


Dear Daniela,
> There is a problem with PCMCIA<->ATA adapters and "True IDE mode":
>
> A CompactFlash unit enters "True IDE mode" when the /OE pin is held low
> at device power on. This is fine when your system is powered on with
> the CF card inserted. But if you insert a CF card into an already
> powered on system, the /OE pin is not connected to the socket and thus
> held high by an device-internal pull up at device power on. This is
> because the power pins are longer than the other pins and connected
> before the others! So the CF card enters "memory mapped mode" instead
> of "True ATA mode" and is no longer accessible from the ATA host.

    Many many thanks to you for the hint - I added the On/Off switch on the adapter power and everything now works fine! I insert cassette, cycle the power and mount the drive - it works!
    Once again - many thanks.

-- 
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Nov 23 2002 - 22:00:36 EST