Please pull from: bk://linuxusb.bkbits.net/linus-2.5
thanks,
greg k-h
drivers/usb/core/devio.c | 63 +++++++++-------------
drivers/usb/core/hcd-pci.c | 31 ++++++-----
drivers/usb/core/hcd.c | 11 +--
drivers/usb/core/usb.c | 43 ++++++---------
drivers/usb/host/ehci-dbg.c | 46 +++++++++-------
drivers/usb/host/ehci-hcd.c | 76 ++++++++++++++++-----------
drivers/usb/host/ehci-hub.c | 19 ++----
drivers/usb/host/ehci-mem.c | 45 +++++++---------
drivers/usb/host/ehci-q.c | 111 ++++++++++++++++------------------------
drivers/usb/host/uhci-hcd.c | 4 -
drivers/usb/serial/usb-serial.c | 53 ++++++++++---------
drivers/usb/storage/transport.c | 2
12 files changed, 243 insertions(+), 261 deletions(-)
-----
ChangeSet@1.924.3.11, 2002-11-30 22:28:49-08:00, oliver@oenone.homelinux.org
[PATCH] USB core: cleanup BKL
drivers/usb/core/devio.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
------
ChangeSet@1.924.3.10, 2002-11-30 22:20:27-08:00, greg@kroah.com
[PATCH] USB: get previous module patch to even build properly...
drivers/usb/core/devio.c | 2 +-
drivers/usb/core/usb.c | 13 ++++++-------
2 files changed, 7 insertions(+), 8 deletions(-)
------
ChangeSet@1.924.3.9, 2002-11-30 22:19:57-08:00, oliver@oenone.homelinux.org
[PATCH] - cleanup for new module primitives
drivers/usb/core/devio.c | 16 +++++++---------
drivers/usb/core/usb.c | 30 ++++++++++++------------------
2 files changed, 19 insertions(+), 27 deletions(-)
------
ChangeSet@1.924.3.8, 2002-11-30 22:09:07-08:00, whitney@math.berkeley.edu
[PATCH] uhci-hcd.c shouldn't halt control endpoints
uhci-hcd.c currently calls usb_endpoint_halt() in the td_error: path of
uhci_result_control(). David Brownell told me that "control endpoints
don't halt" and that this is wrong. The patch below fixes this and allows
my Belkin Universal UPS to work. [Although it still prints lots of
"drivers/usb/input/hid-core.c: ctrl urb status -32 received" messages.]
Greg K-H, could you merge this if it looks right? David mentioned that
the same bug exists in 2.4.x.
drivers/usb/host/uhci-hcd.c | 4 ----
1 files changed, 4 deletions(-)
------
ChangeSet@1.924.3.7, 2002-11-30 00:09:00-08:00, david-b@pacbell.net
[PATCH] ehci, more diagnostics use dev_*() macros
This reduces the quantity of messages, by using the
newer dev_*() macros, and by deleting some messages.
drivers/usb/host/ehci-dbg.c | 27 ++++++++++++---------------
drivers/usb/host/ehci-hcd.c | 40 +++++++++++++++++++++-------------------
drivers/usb/host/ehci-hub.c | 19 +++++++------------
drivers/usb/host/ehci-mem.c | 6 ++----
drivers/usb/host/ehci-q.c | 5 +++--
5 files changed, 45 insertions(+), 52 deletions(-)
------
ChangeSet@1.924.3.6, 2002-11-30 00:08:43-08:00, david-b@pacbell.net
[PATCH] ehci-hcd, handle async_next register correctly
This patch should improve behavior of the EHCI driver,
particularly on VIA hardware.
- A more careful reading of the EHCI spec turns up
requirements not to change this register's value
while the async schedule is enabled. That means
in effect that it must never point to a QH that'd
get unlinked ... driver now uses a dedicated QH.
- Disables async schedule a bit faster: after 50msec
idle, not 330msec idle.
- Streamline the "can't init memory" failure path.
- Start to use the dev_dbg()/dev_info()/... macros
in more places.
This version acts a bunch happier than the previous
version, removing some failure modes I could never
quite convince myself were hardware (they weren't!)
I suspect it'll remove a lot of the "it hangs" failures
that some folk have reported (mostly on 2.4 though).
drivers/usb/host/ehci-dbg.c | 19 +++++--
drivers/usb/host/ehci-hcd.c | 36 ++++++++++----
drivers/usb/host/ehci-mem.c | 39 ++++++++--------
drivers/usb/host/ehci-q.c | 106 ++++++++++++++++++--------------------------
4 files changed, 103 insertions(+), 97 deletions(-)
------
ChangeSet@1.924.3.5, 2002-11-30 00:08:25-08:00, david-b@pacbell.net
[PATCH] reduce debug message volume
This reduces the debug message volume a bit, mostly by using the
new dev_dbg() macros instead of the usb dbg() ones in some places
during HCD init/shutdown. Likewise dev_info().
drivers/usb/core/hcd-pci.c | 31 ++++++++++++++++++-------------
drivers/usb/core/hcd.c | 11 +++--------
2 files changed, 21 insertions(+), 21 deletions(-)
------
ChangeSet@1.924.3.4, 2002-11-30 00:08:09-08:00, david-b@pacbell.net
[PATCH] usb-storage doesn't say clear_halt WORKED
This removes a printk that's been cluttering up my logs,
especially when I do things like 'mkfs -c ...' it doesn't
seem to be needed any more.
drivers/usb/storage/transport.c | 2 --
1 files changed, 2 deletions(-)
------
ChangeSet@1.924.3.3, 2002-11-30 00:03:51-08:00, baldrick@wanadoo.fr
[PATCH] usbfs: more list cleanups
Here is a small cleanup patch for 2.5 that goes on top of my previous
ones. It makes devio.c use the list traversal macros from list.h.
drivers/usb/core/devio.c | 29 ++++++++++-------------------
1 files changed, 10 insertions(+), 19 deletions(-)
------
ChangeSet@1.924.3.2, 2002-11-30 00:02:08-08:00, greg@kroah.com
[PATCH] USB serial: cleaned up the rest of the __MOD_INC and __MOD_DEC calls to use the new module API
drivers/usb/serial/usb-serial.c | 44 ++++++++++++++++++++--------------------
1 files changed, 23 insertions(+), 21 deletions(-)
------
ChangeSet@1.924.3.1, 2002-11-30 00:01:04-08:00, oliver@oenone.homelinux.org
[PATCH] module unload race with usb serial drivers
the serial subdrivers may be unloading while we open.
This patch against 2.5 guards against that.
drivers/usb/serial/usb-serial.c | 9 +++++++--
1 files changed, 7 insertions(+), 2 deletions(-)
------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Dec 07 2002 - 22:00:12 EST