Re: ATAPI DMA timeouts showing up in logs

From: Dennis Grant (trog@wincom.net)
Date: Mon Dec 02 2002 - 10:18:11 EST


>On Thu, 1970-01-01 at 05:59, Dennis Grant wrote:

>> Now that I've got the proper IDE driver in place (2.4.20rc4)
>> and the master drive on the primary interface is running at
>> a full ATA133, these have started showing up in the logs -
>> 2 or 3 a day:

> My guess is its the IDE command/DMA sequence bug that Khalid
> fixed in -ac. Some drives also take a very long time on
> retrying blocks and that might cause a timeout/reset too.

OK.

Interestingly enough, the drive wasn't being used at all during the timeframe
when the messages show up - at least, not explictly. Perhaps some random process
was polling the drive....

Alan, I tried 2.4.20rc4-ac1 but while the patch took, it wouldn't compile. I'll
try again later and fwd where the error was. (I don't have access to that machine
at the moment)

>> This last one is the only indication that something might be >> amiss - the
two instances of "invalid argument" Other than
>> that, the drive appears to work just fine.

>Those are ones CD-ROM's dont support

Ah, OK. Perhaps hdparm shouldn't try them then. :)

Thanks.

DG
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Dec 07 2002 - 22:00:13 EST