On Wed, 4 Dec 2002, dean gaudet wrote:
> i've got a dual athlon 1.4GHz / 760MP (tyan 2462) which has been solid on
> 2.4.19-pre7-ac4, but which reboot twice in 2 days with 2.4.20-ac1.
>
> i then added "noapic" and the 2.4.20-ac1 kernel lasted all of 5 minutes
> before rebooting.
>
> no messages appeared on serial console.
>
> the kernel configs differed only in that i enabled HTB on the 2.4.20-ac1
> kernel. i've now patched the 2.4.19-pre7-ac4 kernel with HTB and i'll run
> with this for a while. below is the config i used for 2.4.20-ac1.
the system rebooted after 8 hours with the 2.4.19-pre7-ac4 + HTB kernel as
well... so perhaps the relevent change is the use of HTB.
or perhaps my hardware has gone bad.
these reboots without anything logged are frustrating.
-dean
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Dec 07 2002 - 22:00:23 EST