Dear Sirs,
This patch for char/joystick/gamecon.c will adds support for Sega
Saturn Pad on parallel port with DirectPad Pro interface. Please set
parameters "8" for Saturn, like "gc=0,8,8,8".
I tested it with several digital controller, multitap, mission stick,
shuttle-mouse(it returns Y-axis inverted value against joystick),
multi controller and racing controller on extra-5volt-powered 1st
connector. It not supports saturn keyboard, virtua gun, electric train
controller and pachinko controller. And I have not tested on 2nd
connector yet.
--- linux-2.4.20/drivers/char/joystick/gamecon.c 2001-09-13 07:34:06.000000000 +0900
+++ linux/drivers/char/joystick/gamecon.c 2002-12-04 09:56:13.000000000 +0900
@@ -11,7 +11,7 @@
*/
/*
- * NES, SNES, N64, Multi1, Multi2, PSX gamepad driver for Linux
+ * NES, SNES, N64, Multi1, Multi2, PSX, SATURN gamepad driver for Linux
*/
/*
@@ -41,11 +41,14 @@
#include <linux/parport.h>
#include <linux/input.h>
+#define GC_PADS_MAX 5
+#define GC_MAX_ARG "6" /* GC_PADS_MAX + 1 */
+
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_LICENSE("GPL");
-MODULE_PARM(gc, "2-6i");
-MODULE_PARM(gc_2,"2-6i");
-MODULE_PARM(gc_3,"2-6i");
+MODULE_PARM(gc, "2-" GC_MAX_ARG "i");
+MODULE_PARM(gc_2, "2-" GC_MAX_ARG "i");
+MODULE_PARM(gc_3, "2-" GC_MAX_ARG "i");
#define GC_SNES 1
#define GC_NES 2
@@ -54,29 +57,31 @@
#define GC_MULTI2 5
#define GC_N64 6
#define GC_PSX 7
+#define GC_SATURN 8
-#define GC_MAX 7
+#define GC_MAX 8
#define GC_REFRESH_TIME HZ/100
struct gc {
struct pardevice *pd;
- struct input_dev dev[5];
+ struct input_dev dev[GC_PADS_MAX];
struct timer_list timer;
- unsigned char pads[GC_MAX + 1];
+ unsigned pads[GC_MAX + 1];
int used;
};
static struct gc *gc_base[3];
-static int gc[] __initdata = { -1, 0, 0, 0, 0, 0 };
-static int gc_2[] __initdata = { -1, 0, 0, 0, 0, 0 };
-static int gc_3[] __initdata = { -1, 0, 0, 0, 0, 0 };
+static int gc[GC_PADS_MAX + 1] __initdata = { -1, 0, 0, 0, 0, 0 };
+static int gc_2[GC_PADS_MAX + 1] __initdata = { -1, 0, 0, 0, 0, 0 };
+static int gc_3[GC_PADS_MAX + 1] __initdata = { -1, 0, 0, 0, 0, 0 };
-static int gc_status_bit[] = { 0x40, 0x80, 0x20, 0x10, 0x08 };
+static unsigned gc_status_bit[] = { 0x40, 0x80, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01,
+ 0x8000, 0x4000, 0x2000, 0x1000, 0x0800, 0x0400, 0x0200, 0x0100 };
static char *gc_names[] = { NULL, "SNES pad", "NES pad", "NES FourPort", "Multisystem joystick",
- "Multisystem 2-button joystick", "N64 controller", "PSX controller" };
+ "Multisystem 2-button joystick", "N64 controller", "PSX controller", "SATURN controller" };
/*
* N64 support.
*/
@@ -287,17 +292,239 @@
}
/*
+ * SATURN support
+ *
+ * References
+ *
+ * Mr. Philhower's DirectPad Pro source code and circuit
+ * joysrc.txt
+ * saturn.gif
+ * http://www.ziplabel.com/
+ * http://www.arcadecontrols.com/Mirrors/www.ziplabel.com/dpadpro/dpadpr50.zip
+ *
+ * Mr. Kashima's SATURN pad analysis documentation
+ * http://Lillith.sk.tsukuba.ac.jp/~kashima/games/saturn-e.html
+ *
+ * Mr. Nagato's IF-SEGA documentation (Japanese)
+ * http://www.geocities.co.jp/Playtown-Dice/4434/ifsspad.htm
+ *
+ * Mr. Saka's PA (Windows 9x IF-SEGA driver) source code
+ * PA.ASM
+ * http://blue.ribbon.to/~als4kmaniac/i2/pa.lzh
+ *
+ * Mr. Murata's linux IF-SEGA driver documentation (Japanese) and header file
+ * DEVICE.txt
+ * ifsega.h ("DEV TYPE" section)
+ * http://www1.tcnet.ne.jp/fmurata/linux/ifsega/ifsega-0.17.tar.gz
+ *
+ * Mr. Kimura's PSXPAD circuit
+ * saturn_wiring.jpg
+ * http://speed.dynu.com/function/Wiring_e.html
+ */
+
+#define GC_SATURN_PADS_MAX 12
+#define GC_SATURN_LENGTH 60 /* multitap (1 (id) + 9 (known max)) byte x 6 connector */
+#define GC_SATURN_ANALOG_DELAY 400 /* micro-second (200-700) */
+#define GC_SATURN_DISABLE_EMPTY_CONNECTOR 1 /* when connector is empty, warn and disable device */
+
+/* output */
+#define GC_SATURN_P1_SEL1 0x01 /* db25 pin 2 */
+#define GC_SATURN_P1_SEL2 0x02 /* db25 pin 3 */
+#define GC_SATURN_P2_SEL1 0x10 /* db25 pin 6 */
+#define GC_SATURN_P2_SEL2 0x20 /* db25 pin 7 */
+#define GC_SATURN_POWER 0x08 /* db25 pin 5 */
+#define GC_SATURN_POWER_SUB 0x04 /* db25 pin 4 */
+#define GC_SATURN_P1_GND_HIGH 0x40 /* db25 pin 8 */
+#define GC_SATURN_P2_GND_HIGH 0x80 /* db25 pin 9 */
+/* input */
+#define GC_SATURN_DATA4 0x10 /* db25 pin 13 */
+#define GC_SATURN_DATA3 0x20 /* db25 pin 12 */
+#define GC_SATURN_DATA2 0x40 /* db25 pin 10 */
+#define GC_SATURN_DATA1 0x80 /* db25 pin 11 */
+
+static short gc_saturn_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_RZ, ABS_Z,
+ ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y };
+static short gc_saturn_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z,
+ BTN_TL, BTN_TR, BTN_START };
+static int gc_saturn_btn_byte[] = { 1, 1, 1, 2, 2, 2, 2, 2, 1 };
+static unsigned char gc_saturn_btn_mask[] = { 0x04, 0x01, 0x02, 0x40, 0x20,
+ 0x10, 0x08, 0x80, 0x08 };
+
+/*
+ * gc_saturn_read_sub() reads parallel port and returns formatted 4 bit data.
+ */
+
+static unsigned char gc_saturn_read_sub(struct gc *gc)
+{
+ unsigned char data;
+
+ /* read parallel port and invert bit 7 (pin 11) */
+ data = parport_read_status(gc->pd->port) ^ 0x80;
+
+ return (data & GC_SATURN_DATA1 ? 1 : 0) | (data & GC_SATURN_DATA2 ? 2 : 0)
+ | (data & GC_SATURN_DATA3 ? 4 : 0) | (data & GC_SATURN_DATA4 ? 8 : 0);
+}
+
+/*
+ * gc_saturn_read_analog() sends clock and returns 8 bit data.
+ */
+
+static unsigned char gc_saturn_read_analog(struct gc *gc, unsigned char power, unsigned char sel2)
+{
+ unsigned char data;
+
+ /* sel2 low - sel1 low */
+ parport_write_data(gc->pd->port, power);
+ udelay(GC_SATURN_ANALOG_DELAY);
+ data = gc_saturn_read_sub(gc) << 4;
+
+ /* sel2 high - sel1 low */
+ parport_write_data(gc->pd->port, power | sel2);
+ udelay(GC_SATURN_ANALOG_DELAY);
+ data |= gc_saturn_read_sub(gc);
+
+ return data;
+}
+
+/*
+ * gc_saturn_read_packet() reads a whole saturn packet at connector
+ * and returns device identifier code.
+ */
+
+static unsigned gc_saturn_read_packet(struct gc *gc, unsigned char *data, int connector, int power_by_port)
+{
+ int i, j;
+ unsigned char power, sel1, sel2, tmp;
+
+ if (!connector) {
+ /* connector 1 */
+ power = GC_SATURN_P2_GND_HIGH + GC_SATURN_P2_SEL1 + GC_SATURN_P2_SEL2
+ + (power_by_port ? GC_SATURN_POWER : 0);
+ sel1 = GC_SATURN_P1_SEL1;
+ sel2 = GC_SATURN_P1_SEL2;
+ } else {
+ /* connector 2 */
+ power = GC_SATURN_P1_GND_HIGH + GC_SATURN_P1_SEL1 + GC_SATURN_P1_SEL2
+ + (power_by_port ? GC_SATURN_POWER : 0);
+ sel1 = GC_SATURN_P2_SEL1;
+ sel2 = GC_SATURN_P2_SEL2;
+ }
+
+ /* read digital id */
+ parport_write_data(gc->pd->port, power | sel2 | sel1);
+ data[0] = gc_saturn_read_sub(gc) & 0x0f;
+
+ switch (data[0]) {
+
+ case 0xf:
+ /* 1111 no pad */
+ return data[0] = 0xff;
+
+ case 0x4:
+ case 0x4 | 0x8:
+ /* ?100 : digital controller
+ * data[ 0] data[ 1] data[ 2]
+ * 00000010 rlduSACB RXYZL100
+ */
+ power += (power_by_port ? GC_SATURN_POWER_SUB : 0);
+ /* pin 4 and pin 9 are connected in digital device. */
+
+ parport_write_data(gc->pd->port, power | sel2);
+ data[1] = gc_saturn_read_sub(gc) << 4;
+ parport_write_data(gc->pd->port, power | sel1);
+ data[1] |= gc_saturn_read_sub(gc);
+ parport_write_data(gc->pd->port, power);
+ data[2] = gc_saturn_read_sub(gc) << 4;
+ parport_write_data(gc->pd->port, power | sel2 | sel1);
+ data[2] |= gc_saturn_read_sub(gc);
+ return data[0] = 0x02; /* digital controller id in analog style */
+
+ case 0x1:
+ /* 0001 : analog controller */
+ parport_write_data(gc->pd->port, power | sel2);
+ udelay(GC_SATURN_ANALOG_DELAY);
+ /* read analog id */
+ data[0] = gc_saturn_read_analog(gc, power, sel2);
+ if (data[0] != 0x41) {
+ /* read controller
+ * data[ 0] data[ 1] data[ 2] data[ 3] ..
+ * deviceID rlduSACB RXYZL/// analog_1 ..
+ */
+ for (i = 0; i < (data[0] & 0x0f); i++)
+ data[i + 1] = gc_saturn_read_analog(gc, power, sel2);
+ parport_write_data(gc->pd->port, power | sel1 | sel2);
+ return data[0];
+ } else {
+ /* read multitap
+ * 0x41 : multitap id
+ *
+ * 0x60 : multitap id-2
+ *
+ * data[ 0] data[ 1] data[ 2] data[ 3] .. : connector 1
+ * deviceID rlduSACB RXYZL/// analog_1 ..
+ *
+ * data[10] .. : connector 2
+ * deviceID ..
+ * .
+ * .
+ * data[n0] data[n1] data[n2]
+ * 00000010 rlduSACB RXYZL000 : digital pad
+ *
+ * data[m0]
+ * 11111111 : no pad
+ * .
+ * .
+ * data[50] data[51] data[52] data[53] .. data[59] : connector 6
+ * deviceID rlduSACB RXYZL/// analog_1 .. analog_6 mission stick x2
+ */
+
+ /* check multitap id-2 */
+ if (gc_saturn_read_analog(gc, power, sel2) != 0x60)
+ return data[0] = 0xff;
+
+ for (i = 0; i < 60; i += 10) {
+ data[i] = gc_saturn_read_analog(gc, power, sel2);
+ if (data[i] != 0xff) {
+ /* read pad */
+ for (j = 0; j < (data[i] & 0x0f); j++)
+ if (j < 9)
+ data[i + j + 1] = gc_saturn_read_analog(gc, power, sel2);
+ }
+ }
+ parport_write_data(gc->pd->port, power | sel2 | sel1);
+ return 0x41; /* multitap id */
+ }
+
+ case 0x0:
+ /* 0000 : mouse */
+ parport_write_data(gc->pd->port, power | sel2);
+ udelay(GC_SATURN_ANALOG_DELAY);
+ tmp = gc_saturn_read_analog(gc, power, sel2);
+ if (tmp == 0xff) {
+ for (i = 0; i < 3; i++)
+ data[i + 1] = gc_saturn_read_analog(gc, power, sel2);
+ parport_write_data(gc->pd->port, power | sel2 | sel1);
+ return data[0] = 0xe3; /* mouse id */
+ }
+
+ default:
+ /* unknown */
+ return data[0];
+ }
+}
+
+/*
* gc_timer() reads and analyzes console pads data.
*/
-#define GC_MAX_LENGTH GC_N64_LENGTH
+#define GC_MAX_LENGTH GC_SATURN_LENGTH
static void gc_timer(unsigned long private)
{
struct gc *gc = (void *) private;
struct input_dev *dev = gc->dev;
unsigned char data[GC_MAX_LENGTH];
- int i, j, s;
+ int i, j, k, s, n;
/*
* N64 pads - must be read first, any read confuses them for 200 us
@@ -307,7 +534,7 @@
gc_n64_read_packet(gc, data);
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < GC_PADS_MAX; i++) {
s = gc_status_bit[i];
@@ -432,6 +659,83 @@
}
}
+/*
+ * SATURN controllers
+ */
+
+ if (gc->pads[GC_SATURN]) {
+ for (n = 0, i = 0; i < 2; i++) {
+ s = gc_saturn_read_packet(gc, data, i, 1) == 0x41 ? 60 : 10;
+ for (j = 0; j < s; j += 10, n++) {
+ if (gc_status_bit[n] & gc->pads[GC_SATURN]) {
+ switch (data[j]) {
+
+ case 0x16:
+ /* multi controller (analog 4 axis) */
+ input_report_abs(dev + n, ABS_Z, data[j + 6]);
+ case 0x15:
+ /* mission stick (analog 3 axis) */
+ input_report_abs(dev + n, ABS_RY, data[j + 4]);
+ input_report_abs(dev + n, ABS_RZ, data[j + 5]);
+ case 0x13:
+ /* racing controller (analog 1 axis) */
+ input_report_abs(dev + n, ABS_RX, data[j + 3]);
+ case 0x02:
+ /* digital pad (digital 2 axis + buttons) */
+ input_report_abs(dev + n, ABS_X,
+ (data[j + 1] & 128 ? 0 : 1) - (data[j + 1] & 64 ? 0 : 1));
+ input_report_abs(dev + n, ABS_Y,
+ (data[j + 1] & 32 ? 0 : 1) - (data[j + 1] & 16 ? 0 : 1));
+ for (k = 0; k < 9; k++)
+ input_report_key(dev + n, gc_saturn_btn[k],
+ ~data[j + gc_saturn_btn_byte[k]] & gc_saturn_btn_mask[k]);
+ break;
+
+ case 0x19:
+ /* mission stick x2 (analog 6 axis + digital 4 axis + buttons) */
+ input_report_abs(dev + n, ABS_X,
+ (data[j + 1] & 128 ? 0 : 1) - (data[j + 1] & 64 ? 0 : 1));
+ input_report_abs(dev + n, ABS_Y,
+ (data[j + 1] & 32 ? 0 : 1) - (data[j + 1] & 16 ? 0 : 1));
+ for (k = 0; k < 9; k++)
+ input_report_key(dev + n, gc_saturn_btn[k],
+ ~data[j + gc_saturn_btn_byte[k]] & gc_saturn_btn_mask[k]);
+ input_report_abs(dev + n, ABS_RX, data[j + 3]);
+ input_report_abs(dev + n, ABS_RY, data[j + 4]);
+ input_report_abs(dev + n, ABS_RZ, data[j + 5]);
+ input_report_abs(dev + n, ABS_HAT1X,
+ (data[j + 6] & 128 ? 0 : 1) - (data[j + 6] & 64 ? 0 : 1));
+ input_report_abs(dev + n, ABS_HAT1Y,
+ (data[j + 6] & 32 ? 0 : 1) - (data[j + 6] & 16 ? 0 : 1));
+ input_report_abs(dev + n, ABS_HAT0X, data[j + 7]);
+ input_report_abs(dev + n, ABS_HAT0Y, data[j + 8]);
+ input_report_abs(dev + n, ABS_Z, data[j + 9]);
+ break;
+
+ case 0xe3:
+ /* shuttle mouse (analog 2 axis + buttons. signed value) */
+ input_report_key(dev + n, BTN_START, data[j + 1] & 0x08);
+ input_report_key(dev + n, BTN_A, data[j + 1] & 0x04);
+ input_report_key(dev + n, BTN_C, data[j + 1] & 0x02);
+ input_report_key(dev + n, BTN_B, data[j + 1] & 0x01);
+ input_report_abs(dev + n, ABS_RX, data[j + 2] ^ 0x80);
+ input_report_abs(dev + n, ABS_RY, data[j + 3] ^ 0x80);
+ break;
+
+ case 0xff:
+ default:
+ /* no pad */
+ input_report_abs(dev + n, ABS_X, 0);
+ input_report_abs(dev + n, ABS_Y, 0);
+ for (k = 0; k < 9; k++)
+ input_report_key(dev + n, gc_saturn_btn[k], 0);
+ break;
+ }
+ }
+ }
+ }
+ }
+
mod_timer(&gc->timer, jiffies + GC_REFRESH_TIME);
}
@@ -460,8 +764,8 @@
{
struct gc *gc;
struct parport *pp;
- int i, j, psx;
- unsigned char data[32];
+ int i, j, k, n, psx;
+ unsigned char data[GC_MAX_LENGTH];
if (config[0] < 0)
return NULL;
@@ -492,7 +796,7 @@
gc->timer.data = (long) gc;
gc->timer.function = gc_timer;
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < GC_PADS_MAX; i++) {
if (!config[i + 1])
continue;
@@ -588,6 +892,53 @@
" please report to <vojtech@suse.cz>.\n", psx);
}
break;
+
+ case GC_SATURN:
+ if (i >= GC_SATURN_PADS_MAX) {
+ gc->pads[GC_SATURN] &= ~gc_status_bit[i];
+ printk(KERN_ERR "gamecon.c: Max %d SATURN controllers supported.\n",GC_SATURN_PADS_MAX);
+ break;
+ }
+ for (n = 0, j = 0; j < 2; j++) {
+ gc_saturn_read_packet(gc, data, j, 1); /* dummy read */
+ udelay(20000); /* enough long time */
+ psx = (gc_saturn_read_packet(gc, data, j, 1) == 0x41) ? 60 : 10;
+ for (k = 0; k < psx ; k += 10, n++) {
+ if (n == i) {
+ if (data[k] == 0xff && GC_SATURN_DISABLE_EMPTY_CONNECTOR) {
+ gc->pads[GC_SATURN] &= ~gc_status_bit[i];
+ printk(KERN_ERR "gamecon.c: No SATURN controller found.\n");
+ }
+ if (data[k] == 0x11) {
+ /* with external 5 volt powered single connector,
+ analog device returns 0x11 when read connector 2. */
+ gc->pads[GC_SATURN] &= ~gc_status_bit[i];
+ printk(KERN_WARNING "gamecon.c: Single SATURN connector?\n");
+ }
+ }
+ }
+ }
+ if (i > n - 1) {
+ gc->pads[GC_SATURN] &= ~gc_status_bit[i];
+ printk(KERN_ERR "gamecon.c: No more connector.(%d exists)\n",n);
+ break;
+ }
+ if (gc->pads[GC_SATURN] & gc_status_bit[i]) {
+ for (j = 0; j < 9; j++)
+ set_bit(gc_saturn_btn[j], gc->dev[i].keybit);
+ for (j = 0; j < 10; j++) {
+ set_bit(gc_saturn_abs[j], gc->dev[i].absbit);
+ if (j < 2 || j > 7) {
+ gc->dev[i].absmin[gc_saturn_abs[j]] = -1;
+ gc->dev[i].absmax[gc_saturn_abs[j]] = 1;
+ } else {
+ gc->dev[i].absmin[gc_saturn_abs[j]] = 1;
+ gc->dev[i].absmax[gc_saturn_abs[j]] = 255;
+ gc->dev[i].absflat[gc_saturn_abs[j]] = 0;
+ }
+ }
+ }
+ break;
}
gc->dev[i].name = gc_names[config[i + 1]];
@@ -605,7 +956,7 @@
return NULL;
}
- for (i = 0; i < 5; i++)
+ for (i = 0; i < GC_PADS_MAX; i++)
if (gc->pads[0] & gc_status_bit[i]) {
input_register_device(gc->dev + i);
printk(KERN_INFO "input%d: %s on %s\n", gc->dev[i].number, gc->dev[i].name, gc->pd->port->name);
@@ -617,25 +968,26 @@
#ifndef MODULE
int __init gc_setup(char *str)
{
- int i, ints[7];
+ int i, ints[GC_PADS_MAX + 2];
get_options(str, ARRAY_SIZE(ints), ints);
- for (i = 0; i <= ints[0] && i < 6; i++) gc[i] = ints[i + 1];
+ for (i = 0; i <= ints[0] && i < GC_PADS_MAX + 1; i++) gc[i] = ints[i + 1];
return 1;
}
int __init gc_setup_2(char *str)
{
- int i, ints[7];
+ int i, ints[GC_PADS_MAX + 2];
get_options(str, ARRAY_SIZE(ints), ints);
- for (i = 0; i <= ints[0] && i < 6; i++) gc_2[i] = ints[i + 1];
+ for (i = 0; i <= ints[0] && i < GC_PADS_MAX + 1; i++) gc_2[i] = ints[i + 1];
return 1;
}
int __init gc_setup_3(char *str)
{
- int i, ints[7];
+ int i, ints[GC_PADS_MAX + 2];
get_options(str, ARRAY_SIZE(ints), ints);
- for (i = 0; i <= ints[0] && i < 6; i++) gc_3[i] = ints[i + 1];
+ for (i = 0; i <= ints[0] && i < GC_PADS_MAX + 1; i++) gc_3[i] = ints[i + 1];
return 1;
}
+
__setup("gc=", gc_setup);
__setup("gc_2=", gc_setup_2);
__setup("gc_3=", gc_setup_3);
@@ -659,7 +1011,7 @@
for (i = 0; i < 3; i++)
if (gc_base[i]) {
- for (j = 0; j < 5; j++)
+ for (j = 0; j < GC_PADS_MAX; j++)
if (gc_base[i]->pads[0] & gc_status_bit[j])
input_unregister_device(gc_base[i]->dev + j);
parport_unregister_device(gc_base[i]->pd);
--- YOKOTA, Ken-ichi- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Dec 07 2002 - 22:00:26 EST