Hi Alan,
using 2.4.20-BK tree gives me:
flushing ide devices: hda hdd
at reboot time in an endless loop drawing over the screen. No reboot will be
made, I have to do that either by sysrq-b or reset button.
Using:
[*] PCI IDE chipset support
[*] Generic PCI bus-master DMA support
[*] Use PCI DMA by default when available
<*> Intel PIIXn chipsets support
[*] IGNORE word93 Validation BITS
root@codeman:[/] # hdparm -i /dev/hda
/dev/hda:
Model=MAXTOR 6L060J3, FwRev=A93.0500, SerialNo=663219752652
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
BuffType=DualPortCache, BuffSize=1819kB, MaxMultSect=16, MultSect=16
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=117266688
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 1 2 3 4 5
BTW: The attached patch is needed to build the 2.4.20-BK tree successfully
because "local_irq_*" is missing and ld complains about undefined
reference at linking time.
Any hints to fix that flushing ide bla foobar thing?
TIA!
ciao, Marc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Dec 07 2002 - 22:00:29 EST