2.5.52: PDC20268 failure

From: Frank van de Pol (fvdpol@home.nl)
Date: Wed Dec 18 2002 - 18:28:53 EST

the 2.5 series of kernels (since early ide changes) fails on my machine when
configuring the harddisks.

machine is a dual P-II 300 MHz, Intel BX chipset
two Promise UltraTx2 boards, PDC20268, with an IBM disk connected to every channel.

kernel 2.4.18 is still running ok for me. When running a 2.5.x kernel on
this same box, the cards seem te be assigned different interrupts (weird,
since the cards remain in the same slots etc.)

2.4.18: (works fine)
ide2 at 0xa800-0xa807,0xac02 on irq 17
ide3 at 0xb000-0xb007,0xb402 on irq 17
ide4 at 0xbc00-0xbc07,0xc002 on irq 18
ide5 at 0xc400-0xc407,0xc802 on irq 18

2.5.52: (lost interrupts)
ide2 at 0xa800-0xa807,0xac02 on irq 16
ide3 at 0xb000-0xb007,0xb402 on irq 16
ide4 at 0xbc00-0xbc07,0xc002 on irq 16
ide5 at 0xc400-0xc407,0xc802 on irq 16

Regards,
Frank. 

-- 
+---- --- -- -  -   -    - 
| Frank van de Pol                  -o)    A-L-S-A
| FvdPol@home.nl                    /\\  Sounds good!
| http://www.alsa-project.org      _\_v
| Linux - Why use Windows if we have doors available?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Mon Dec 23 2002 - 22:00:21 EST