Using the osdl (http://www.osdl.org) resources provided to me I'm running a
series of contest benchmarks on 2.5.52-mm1 and modifying the scheduler tunables
as provided by RML's patch. SMP used to minimise how long it will take me to do
these. This is the first in the series and I've run a range of max_timeslices
(default is 300ms; range 100-400):
noload:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.52-mm1 [8] 39.7 180 0 0 1.10
max_tim100 [3] 39.7 180 0 0 1.10
max_tim200 [3] 39.6 180 0 0 1.09
max_tim400 [3] 39.7 181 0 0 1.10
cacherun:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.52-mm1 [7] 36.9 194 0 0 1.02
max_tim100 [3] 36.7 194 0 0 1.01
max_tim200 [3] 36.8 193 0 0 1.02
max_tim400 [3] 36.8 194 0 0 1.02
process_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.52-mm1 [7] 49.0 144 10 50 1.35
max_tim100 [3] 52.5 133 14 60 1.45
max_tim200 [3] 47.8 150 9 43 1.32
max_tim400 [3] 48.3 146 10 48 1.33
Slight balance change here. Note process load forks off 4*num_cpus processes
that do their task in a very short time and shortening the max timeslice seems
to slightly favour these tasks at the expense of kernel compilation time.
ctar_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.52-mm1 [7] 55.5 156 1 10 1.53
max_tim100 [3] 56.0 156 1 10 1.55
max_tim200 [3] 53.9 162 1 10 1.49
max_tim400 [3] 55.5 148 1 10 1.53
xtar_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.52-mm1 [7] 77.4 122 1 8 2.14
max_tim100 [3] 73.0 123 1 8 2.02
max_tim200 [3] 82.5 115 1 8 2.28
max_tim400 [3] 82.8 117 1 9 2.29
io_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.52-mm1 [7] 80.5 108 10 19 2.22
max_tim100 [3] 93.8 100 13 20 2.59
max_tim200 [3] 88.8 98 12 19 2.45
max_tim400 [3] 71.4 114 8 18 1.97
The trend here is one of definite shortening of duration of kernel compilation
during io load as the max timeslice is made longer
io_other:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.52-mm1 [7] 60.1 131 7 18 1.66
max_tim100 [3] 64.5 127 8 19 1.78
max_tim200 [3] 62.8 125 8 19 1.73
max_tim400 [3] 62.5 126 6 15 1.73
read_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.52-mm1 [7] 49.9 149 5 6 1.38
max_tim100 [3] 50.4 150 5 6 1.39
max_tim200 [3] 50.5 149 5 6 1.39
max_tim400 [3] 50.6 148 5 6 1.40
list_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.52-mm1 [7] 43.8 167 0 9 1.21
max_tim100 [3] 44.2 166 0 9 1.22
max_tim200 [3] 43.6 168 0 9 1.20
max_tim400 [3] 43.3 167 0 9 1.20
mem_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.52-mm1 [7] 71.1 123 36 2 1.96
max_tim100 [3] 81.1 100 38 2 2.24
max_tim200 [3] 84.1 101 36 2 2.32
max_tim400 [3] 82.8 97 36 2 2.29
No idea what's going on in mem_load
I will continue to do these with some of the other scheduler tunables. I will
need recommendations if anyone is interested in further resolution testing than
that I'm currently doing.
Con
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Dec 23 2002 - 22:00:22 EST