> From: Protasevich, Natalie [mailto:Natalie.Protasevich@UNISYS.com]
> + /*
> + * Switch to Physical destination mode in case of generic
> + * more than 8 CPU system, which has xAPIC support
> + */
> +#define FLAT_APIC_CPU_MAX 8
> + if ((clustered_apic_mode == CLUSTERED_APIC_NONE) &&
> + (xapic_support) &&
> + (num_processors > FLAT_APIC_CPU_MAX)) {
> + clustered_apic_mode = CLUSTERED_APIC_XAPIC;
> + apic_broadcast_id = APIC_BROADCAST_ID_XAPIC;
> + int_dest_addr_mode = APIC_DEST_PHYSICAL;
> + int_delivery_mode = dest_Fixed;
> + esr_disable = 1;
> + }
> +#endif
> +
>
> Venkatesh,
> I could not find the definition for CLUSTERED_APIC_NONE. Is
> this an attempt
> to set up the clustered mode right in case if it was not compiled with
> CLUSTERED_..._XAPIC on the system with > 8 cpu?
CLUSTERED_APIC_NONE is the normal default mode of flat logical (defined in asm/smpboot.h)
NUMAQ, Summit has a OEM field check and they change it to Cluster or Physical mode
before this point. What I am trying here is to check whether we are still in the default
flat (with max 8 cpu) mode, and we have more than 8 xAPIC supporting CPUs, then
we switch to physical mode rather than flat mode.
> >There is already some code in base that does this. For NUMAQ
> specifically
> >this check happens and clustered mode is selected for APIC.
> My patch has
> this
> >additinal check (after the initial IBM OEM check), for
> non-NUMAQ systems
> with
> >more than 8 CPUs and xAPIC support. These systems can not
> work with the
> >default flat addressing mode. So, this patch sets up such systems in
> physical
> >mode.
>
> In the systems like ES7000, all CPU (up to 32) and IO-APICs have 8-bit
> hard-wired ID's according to their topological position.
> Therefore, the
> apic_broadcast_id be has to be 0xFF (like summit's, I guess),
> and modes
> should be clustered logical for Cascades, clustered physical
> for xAPIC. The
> IO-APIC lines are programmed with the broadcast ID/lowest priority for
> Cascades, and boot CPU ID/XTPR flag/Lowest priority for
> Fosters/Gallatins.
> This is pretty much the only choices we have. If this is not
> what the patch
> allows to do, we need a last chance architectural hook to be able to
> accommodate our stuff.
Unfortunately, this patch doesn't do that. My initial attempt (first version of
the patch that I had sent) was trying to set up clustered physical mode for all non-NUMAQ
systems, with more than 8 CPUs with xAPIC support. But due to the amount of code changes
that it involved, we had to fall back to setting up such systems in physical mode,
with IO-APIC programmed for fixed Priority interrupt.
Thanks,
-Venkatesh
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Dec 23 2002 - 22:00:32 EST