On Tue, Jan 07, 2003 at 09:17:46PM -0500, Zwane Mwaikambo wrote:
> > It freezes kernel (sysrq do nothing) after lines:
> > scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> > Vendor: TEAC Model: CD-W512EB Rev: 2
> > Type: CD-ROM ANSI SCSI revision: 02
> > scsi scan: host 0 channel 0 id 0 lun 0 identifier too long, length 60, max 50. Device might be improperly identified.
> >
> > while attaching it to /dev/hde works ok. Why?
>
> This has been observed to cause an oops on some boxes and nothing on mine,
> try this patch from Andries
Acctualy this patch caused only I do not see "scsi scan: host 0 channel 0 id
0 lun 0 identifier too long, length 60, max 50. Device might be improperly
identified."
how ever after above message kernel causes hard hw lockup. IDE activity
LED is turned on but nothing else works. (nor sysrq)
I believe that code that report this message causes hw lockup.
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
-- Lukáš Hejtmánek - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jan 15 2003 - 22:00:25 EST