2.5.58 - USB-storage

From: Murray J. Root (murrayr@brain.org)
Date: Tue Jan 14 2003 - 15:15:33 EST

Next message: Abramo Bagnara: "Re: [OFFTOPIC] RMS and reactions to him"
Previous message: Mark Mielke: "Re: Changing argv[0] under Linux."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

ASUS P4S533 (SiS645DX)
P4 2GHz
1G PC2700
SanDisk SDDR-77 ImageMate Dual Card Reader

In 2.5.56 I can read from CF cards, but can't write to them

In 2.5.58:
With scsi & usb-storage built in I get unknown errors in the syslog
and the card won't mount

with scsi & usb-storage as modules the process trying to mount the
CF card hangs until I pull the card out and put it back. syslog shows a
change event and the process trying to do the mount reports no medium found.
In the syslog are these messages:

Jan 14 14:47:35 Master kernel: usb-storage: Unit Attention: Not ready to ready change, medium may have changed
Jan 14 14:47:35 Master kernel: usb-storage: scsi cmd done, result=0x2
Jan 14 14:47:35 Master kernel: usb-storage: *** thread sleeping.
Jan 14 14:47:35 Master kernel: usb-storage: queuecommand() called
Jan 14 14:47:35 Master kernel: usb-storage: *** thread awakened.
Jan 14 14:47:35 Master kernel: usb-storage: Command READ_10 (10 bytes)
Jan 14 14:47:35 Master kernel: usb-storage: 28 00 00 00 00 00 00 00 08 00
Jan 14 14:47:35 Master kernel: usb-storage: Bulk command S 0x43425355 T 0x25 Trg 0 LUN 0 L 4096 F 128 CL 10
Jan 14 14:47:35 Master kernel: usb-storage: usb_stor_bulk_transfer_buf(): xfer 31 bytes
Jan 14 14:47:35 Master kernel: usb-storage: Status code 0; transferred 31/31
Jan 14 14:47:35 Master kernel: usb-storage: -- transfer complete
Jan 14 14:47:35 Master kernel: usb-storage: Bulk command transfer result=0
Jan 14 14:47:35 Master kernel: usb-storage: usb_stor_bulk_transfer_sglist(): xfer 4096 bytes, 1 entries
Jan 14 14:47:35 Master kernel: usb-storage: Status code 0; transferred 4096/4096
Jan 14 14:47:35 Master kernel: usb-storage: -- transfer complete
Jan 14 14:47:35 Master kernel: usb-storage: Bulk data transfer result 0x0
Jan 14 14:47:35 Master kernel: usb-storage: Attempting to get CSW...
Jan 14 14:47:35 Master kernel: usb-storage: usb_stor_bulk_transfer_buf(): xfer 13 bytes
Jan 14 14:47:35 Master kernel: usb-storage: Status code 0; transferred 13/13
Jan 14 14:47:35 Master kernel: usb-storage: -- transfer complete
Jan 14 14:47:35 Master kernel: usb-storage: Bulk status result = 0
Jan 14 14:47:35 Master kernel: usb-storage: Bulk status Sig 0x53425355 T 0x25 R 0 Stat 0x0
Jan 14 14:47:35 Master kernel: usb-storage: scsi cmd done, result=0x0
Jan 14 14:47:35 Master kernel: usb-storage: *** thread sleeping.
Jan 14 14:47:35 Master kernel: end_request: I/O error, dev sda, sector 0
Jan 14 14:47:35 Master kernel: Buffer I/O error on device sd(8,0), logical block 0
Jan 14 14:47:35 Master kernel: Buffer I/O error on device sd(8,0), logical block 0
Jan 14 14:47:35 Master kernel: unable to read partition table

The same card was readable in 2.5.56 before and after the attempts with 2.5.58

-- Murray J. Root

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: Abramo Bagnara: "Re: [OFFTOPIC] RMS and reactions to him"
Previous message: Mark Mielke: "Re: Changing argv[0] under Linux."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Wed Jan 15 2003 - 22:00:51 EST