problems achieving decent throughput with latency.

From: Ben Greear (greearb@candelatech.com)
Date: Sun Feb 02 2003 - 02:38:02 EST

I am testing my latency-insertion tool, and I notice that tcp will not use
all of the available bandwidth if there is any significant amount of latency
on the wire.

For example, with 25ms latency in both directions, I see about 8Mbps
bi-directional throughput.

If I lower that to 15ms, I see 12Mbps bi-directional throughput.

I see 27Mbps at 5ms.

Here is the /proc/net/tcp output at 5ms latency.

machine demo2
   13: 050302AC:80EB 070302AC:80EB 01 0005900C:0002012E 01:00000016 00000000 0 0 578943 3 c6628a80 22 4 1 45 -1

machine demo1
   11: 070302AC:80EB 050302AC:80EB 01 00010DDB:00000000 01:00000014 00000000 0 0 513094 3 c62c5080 21 4 1 45 -1

Any ideas why it is so slow at the higher latencies? Any other info
I can gather to help determine the cause?

(UDP does not experience this slowdown, so I believe my latency
insertion tool is working as designed, but it's always possible it is
to blame...) 

-- 
Ben Greear <greearb@candelatech.com>       <Ben_Greear AT excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear

attached mail follows:

<div class="moz-text-flowed" style="font-family: -moz-fixed">I am testing my latency-insertion tool, and I notice that tcp will not use all of the available bandwidth if there is any significant amount of latency on the wire.

For example, with 25ms latency in both directions, I see about 8Mbps bi-directional throughput.

If I lower that to 15ms, I see 12Mbps bi-directional throughput.

I see 27Mbps at 5ms.

Here is the /proc/net/tcp output at 5ms latency.

machine demo2 13: 050302AC:80EB 070302AC:80EB 01 0005900C:0002012E 01:00000016 00000000 0 0 578943 3 c6628a80 22 4 1 45 -1

machine demo1 11: 070302AC:80EB 050302AC:80EB 01 00010DDB:00000000 01:00000014 00000000 0 0 513094 3 c62c5080 21 4 1 45 -1

Any ideas why it is so slow at the higher latencies? Any other info I can gather to help determine the cause?

(UDP does not experience this slowdown, so I believe my latency insertion tool is working as designed, but it's always possible it is to blame...) 

-- 
Ben Greear <greearb@candelatech.com>       <Ben_Greear AT excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear

</div>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Fri Feb 07 2003 - 22:00:08 EST