[1.] One line summary of the problem:
Reading files on an ext2 fs on a CD mounted loopback crashes the system.
[2.] Full description of the problem/report:
I have an ext2 fs that has been burned directly to a CD. Mounting
/dev/cdrom (/dev/hdc) loopback is successful, and it is possible to `cd'
around the filesystem, as well as `ls' and `cat' some files successfully.
When trying a recursive copy (`cp -r') from the CD to a location on the hard
drive, or even a simple shell script for-loop to copy multiple files, the
kernel "oopses", keyboard leds invert or begin to flicker, and soon
afterwards the system becomes unresponsive.
[3.] Keywords (i.e., modules, networking, kernel):
cdrom, loopback filesystem, ext2
[4.] Kernel version (from /proc/version):
Linux version 2.4.19 (pkg@meson) (gcc version 2.95.3 20010315 (release))
#4 Mon Dec 9 11:44:05 EST 2002
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
ksymoops 2.4.8 on i686 2.4.19. Options used
-V (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.19/ (default)
-m /usr/src/linux/System.map (default)
Feb 7 22:53:34 quantum kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000
Feb 7 22:53:34 quantum kernel: dc84c529
Feb 7 22:53:34 quantum kernel: *pde = 00000000
Feb 7 22:53:34 quantum kernel: Oops: 0000
Feb 7 22:53:34 quantum kernel: CPU: 0
Feb 7 22:53:34 quantum kernel: EIP: 0010:[rtc:__insmod_rtc_O/lib/modules/2.4.19/kernel/drivers/char/rtc.o+-15063/96] Not tainted
Feb 7 22:53:34 quantum kernel: EFLAGS: 00010202
Feb 7 22:53:34 quantum kernel: eax: 00000008 ebx: 00000028 ecx: 00000002 edx: 00000004
Feb 7 22:53:34 quantum kernel: esi: 00000000 edi: c0252a54 ebp: c0252a00 esp: d1fa3e70
Feb 7 22:53:34 quantum kernel: ds: 0018 es: 0018 ss: 0018
Feb 7 22:53:34 quantum kernel: Process tar (pid: 5454, stackpage=d1fa3000)
Feb 7 22:53:34 quantum kernel: Stack: 00000800 dae36200 00010067 00000004 00000001 00000000 c0252a50 c0252600
Feb 7 22:53:34 quantum kernel: c0252200 00000400 00000400 c0252000 dc84c73b dae36200 00000800 dae36200
Feb 7 22:53:34 quantum kernel: dae3eeb4 dae3630c dae3ee60 00000000 dc835d2d dae36200 00000282 d1fa3f04
Feb 7 22:53:34 quantum kernel: Call Trace: [rtc:__insmod_rtc_O/lib/modules/2.4.19/kernel/drivers/char/rtc.o+-14533/96] [rtc:__insmod_rtc_O/lib/modules/2.4.19/kernel/drivers/char/rtc.o+-107219/96] [rtc:__insmod_rtc_O/lib/modules/2.4.19/kernel/drivers/char/rtc.o+-5856/96] [generic_unplug_device+32/40] [__run_task_queue+76/96]
Feb 7 22:53:34 quantum kernel: Code: f3 a5 a8 02 74 02 66 a5 a8 01 74 01 a4 8b 54 24 34 0f b7 82
Using defaults from ksymoops -t elf32-i386 -a i386
>>edi; c0252a54 <__initcall_end+4c/5f8>
>>ebp; c0252a00 <__initcall_netlink_proto_init+0/4>
>>esp; d1fa3e70 <_end+11d23968/1c57fb58>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: f3 a5 repz movsl %ds:(%esi),%es:(%edi)
Code; 00000002 Before first symbol
2: a8 02 test $0x2,%al
Code; 00000004 Before first symbol
4: 74 02 je 8 <_EIP+0x8> 00000008 Before first symbol
Code; 00000006 Before first symbol
6: 66 a5 movsw %ds:(%esi),%es:(%edi)
Code; 00000008 Before first symbol
8: a8 01 test $0x1,%al
Code; 0000000a Before first symbol
a: 74 01 je d <_EIP+0xd> 0000000d Before first symbol
Code; 0000000c Before first symbol
c: a4 movsb %ds:(%esi),%es:(%edi)
Code; 0000000d Before first symbol
d: 8b 54 24 34 mov 0x34(%esp,1),%edx
Code; 00000011 Before first symbol
11: 0f b7 82 00 00 00 00 movzwl 0x0(%edx),%eax
Feb 7 22:57:42 quantum kernel: <1>Unable to handle kernel paging request at virtual address fffffffc
Feb 7 22:57:42 quantum kernel: c0111d18
Feb 7 22:57:42 quantum kernel: *pde = 00001063
Feb 7 22:57:42 quantum kernel: Oops: 0000
Feb 7 22:57:42 quantum kernel: CPU: 0
Feb 7 22:57:42 quantum kernel: EIP: 0010:[__wake_up+40/152] Not tainted
Feb 7 22:57:42 quantum kernel: EFLAGS: 00010013
Feb 7 22:57:42 quantum kernel: eax: 00000001 ebx: 00000000 ecx: db6b2000 edx: d879b160
Feb 7 22:57:42 quantum kernel: esi: 00000046 edi: 00000000 ebp: db6b3e4c esp: db6b3e34
Feb 7 22:57:42 quantum kernel: ds: 0018 es: 0018 ss: 0018
Feb 7 22:57:42 quantum kernel: Process giFT (pid: 25779, stackpage=db6b3000)
Feb 7 22:57:42 quantum kernel: Stack: c10a8010 c14d0420 db6b3e98 c14d0424 00000282 00000003 00000000 c0122dcc
Feb 7 22:57:42 quantum kernel: c10a8010 00000000 c0122622 00000000 db6b3e98 00000000 db77f4f0 00000000
Feb 7 22:57:42 quantum kernel: 00000001 db6b3e98 00000000 db77f4f0 c01226bd 00000000 00000000 db77f440
Feb 7 22:57:42 quantum kernel: Call Trace: [unlock_page+96/100] [truncate_list_pages+330/420] [truncate_inode_pages+65/104] [vmtruncate+157/292] [inode_setattr+35/176]
Feb 7 22:57:42 quantum kernel: Code: 8b 4b fc 8b 01 85 45 fc 74 4e 31 c0 9c 5e fa c7 01 00 00 00
>>ecx; db6b2000 <_end+1b431af8/1c57fb58>
>>edx; d879b160 <_end+1851ac58/1c57fb58>
>>ebp; db6b3e4c <_end+1b433944/1c57fb58>
>>esp; db6b3e34 <_end+1b43392c/1c57fb58>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 4b fc mov 0xfffffffc(%ebx),%ecx
Code; 00000003 Before first symbol
3: 8b 01 mov (%ecx),%eax
Code; 00000005 Before first symbol
5: 85 45 fc test %eax,0xfffffffc(%ebp)
Code; 00000008 Before first symbol
8: 74 4e je 58 <_EIP+0x58> 00000058 Before first symbol
Code; 0000000a Before first symbol
a: 31 c0 xor %eax,%eax
Code; 0000000c Before first symbol
c: 9c pushf
Code; 0000000d Before first symbol
d: 5e pop %esi
Code; 0000000e Before first symbol
e: fa cli
Code; 0000000f Before first symbol
f: c7 01 00 00 00 00 movl $0x0,(%ecx)
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux meson 2.4.19 #4 Mon Dec 9 11:44:05 EST 2002 i686 unknown
Gnu C 2.95.3
Gnu make 3.80
util-linux 2.11h
mount 2.11h
modutils 2.4.7
e2fsprogs 1.23
PPP 2.4.1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Linux C++ Library 3.0.0
Procps 2.0.7
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0
Modules Loaded ipv6 agpgart ymfpci ac97_codec soundcore ide-scsi iptable_filter ipt_MASQUERADE iptable_nat ip_conntrack ip_tables af_packet ppp_synctty ppp_async ppp_generic slhc rtc sr_mod cdrom scsi_mod ne 8390 unix
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 1
cpu MHz : 400.917
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 799.53
[7.3.] Module information (from /proc/modules):
ipv6 122976 -1
agpgart 15696 3 (autoclean)
ymfpci 39856 0
ac97_codec 9584 0 [ymfpci]
soundcore 3472 2 [ymfpci]
ide-scsi 7328 0
iptable_filter 1696 1 (autoclean)
ipt_MASQUERADE 1168 1 (autoclean)
iptable_nat 13008 1 (autoclean) [ipt_MASQUERADE]
ip_conntrack 12960 1 (autoclean) [ipt_MASQUERADE iptable_nat]
ip_tables 10272 5 [iptable_filter ipt_MASQUERADE iptable_nat]
af_packet 11200 2 (autoclean)
ppp_synctty 4704 0 (unused)
ppp_async 6224 1
ppp_generic 18096 3 [ppp_synctty ppp_async]
slhc 4320 0 [ppp_generic]
rtc 5696 0
sr_mod 11504 0 (autoclean) (unused)
cdrom 26816 0 (autoclean) [sr_mod]
scsi_mod 80336 2 (autoclean) [ide-scsi sr_mod]
ne 6448 1
8390 5840 0 [ne]
unix 13312 107 (autoclean)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
/proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
0280-029f : eth0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
4000-403f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
5000-501f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
c000-cfff : PCI Bus #01
d000-dfff : PCI Bus #02
e000-e01f : Intel Corp. 82371AB/EB/MB PIIX4 USB
f000-f00f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
/proc/iomem
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1bfeffff : System RAM
00100000-001daa6b : Kernel code
001daa6c-0021604b : Kernel data
1bff0000-1bff2fff : ACPI Non-volatile Storage
1bff3000-1bffffff : ACPI Tables
e0000000-e3ffffff : Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
e4000000-e5ffffff : PCI Bus #01
e4000000-e4ffffff : nVidia Corporation Vanta [NV6]
e6000000-e7ffffff : PCI Bus #01
e6000000-e7ffffff : nVidia Corporation Vanta [NV6]
e8000000-e80fffff : PCI Bus #02
e8000000-e8003fff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
e8004000-e8004fff : NEC Corporation USB (#2)
e8005000-e80050ff : NEC Corporation USB 2.0
e8006000-e80067ff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
e8007000-e8007fff : NEC Corporation USB
e8100000-e8107fff : Yamaha Corporation YMF-724
e8100000-e8107fff : ymfpci
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x2
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e6000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:02.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00:02.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
00:02.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0e.0 PCI bridge: Hint Corp: Unknown device 0021 (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 02
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e8000000-e80fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [90] #06 [0000]
Capabilities: [a0] Vital Product Data
00:0f.0 Multimedia audio controller: Yamaha Corporation YMF-724 (rev 03)
Subsystem: Yamaha Corporation YMF724-Based PCI Audio Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 6250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 11) (prog-if 00 [VGA])
Subsystem: Creative Labs CT6892 RIVA TNT2 Value
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e6000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at e5000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x2
02:08.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Adaptec: Unknown device 0235
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 08
Interrupt: pin A routed to IRQ 12
Region 0: Memory at e8007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Adaptec: Unknown device 0235
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 08
Interrupt: pin B routed to IRQ 9
Region 0: Memory at e8004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.2 USB Controller: NEC Corporation: Unknown device 00e0 (rev 01) (prog-if 20)
Subsystem: Adaptec: Unknown device 02e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8500ns max), cache line size 08
Interrupt: pin C routed to IRQ 10
Region 0: Memory at e8005000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0b.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8020 (prog-if 10 [OHCI])
Subsystem: Texas Instruments: Unknown device 8010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8006000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATAPI Model: CD-ROM 36X Rev: T6A3
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W1210A Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
/proc/ide/hdc/driver
ide-scsi version 0.9
[X.] Other notes, patches, fixes, workarounds:
This seems completely reproducable on my system. I don't know if it is
related to the contents of this individual CD or a more general problem, as
this is the only CD I have ever been foolish enough to place an ext2 fs
upon. I can make the cd image available if necessary.
Please CC further questions or responses to me, as I am not subscribed to
the list. Thanks in advance!
Jean-Paul Calderone
--
Seduced, shaggy Samson snored.
She scissored short. Sorely shorn,
Soon shackled slave, Samson sighed,
Silently scheming,
Sightlessly seeking
Some savage, spectacular suicide.
-- Stanislaw Lem, "Cyberiad"
--
up 0:28, 7 users, load average: 0.09, 0.07, 0.09
This archive was generated by hypermail 2b29 : Sat Feb 15 2003 - 22:00:20 EST