760MPX freezes with ohci-module

From: Klaus Niederkrueger (kniederk@MI.Uni-Koeln.DE)
Date: Wed Feb 12 2003 - 09:00:47 EST


Hello,

I'm wondering what is wrong with my system: It is an ASUS-M266D,
(760MPX-chipset, 768 Northbridge, 762 southbridge) that comes with a USB
2.0-NEC card, but it has an USB 1.1 onboard controller. I'm using a single
AthlonXP processor.

The distribution I'm using is SuSE 8.0, but I have installed the Marcelo
2.4.20 kernel and later the Marcelo 2.4.21-pre4 kernel with no success.

As soon as I load the ohci-module for the onboard controller the system
freezes. (there was in an earlier versions a hw-bug in the chipset, but
as far as I know my chipset has a newer revision, where this has been
fixed). This also happens, if I unload first the Ehci-module for the
USB2.0-card.

I also tried Knoppix 3.1 and it only boots, if I switch off the
usb-probing on the boot-prompt, otherwise it also freezes.

If I load the standard kernel that comes with the Suse-distribution 8.0
the usb-port works. What is wrong? If you need further information please
ask.

I looked at the log-files, but did not find any message related to the
crash.

I'm not on the mailing list, so if you have any hint, please CC also to
me.

Thanks a lot.

        Klaus

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Feb 15 2003 - 22:00:41 EST