This is patchset to support NEC PC-9800 subarchitecture
against 2.5.61 (3/26).
Files under arch/i386/mach-pc9800 directory.
For fix difference of cascade IRQ number and APM BIOS version BUG.
diff -Nru linux-2.5.61/arch/i386/mach-pc9800/Makefile linux98-2.5.61/arch/i386/mach-pc9800/Makefile
--- linux-2.5.61/arch/i386/mach-pc9800/Makefile 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.61/arch/i386/mach-pc9800/Makefile 2003-02-16 17:19:03.000000000 +0900
@@ -0,0 +1,7 @@
+#
+# Makefile for the linux kernel.
+#
+
+EXTRA_CFLAGS += -I../kernel
+
+obj-y := setup.o topology.o
diff -Nru linux-2.5.61/arch/i386/mach-pc9800/setup.c linux98-2.5.61/arch/i386/mach-pc9800/setup.c
--- linux-2.5.61/arch/i386/mach-pc9800/setup.c 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.61/arch/i386/mach-pc9800/setup.c 2003-02-16 17:19:03.000000000 +0900
@@ -0,0 +1,117 @@
+/*
+ * Machine specific setup for generic
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/apm_bios.h>
+#include <asm/setup.h>
+#include <asm/arch_hooks.h>
+
+struct sys_desc_table_struct {
+ unsigned short length;
+ unsigned char table[0];
+};
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+ init_ISA_irqs();
+}
+
+/*
+ * IRQ7 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq7 = { no_action, 0, 0, "cascade", NULL, NULL};
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ * Fill in any interrupts that may have been left out by the general
+ * init_IRQ() routine. interrupts having to do with the machine rather
+ * than the devices on the I/O bus (like APIC interrupts in intel MP
+ * systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ apic_intr_init();
+#endif
+
+ setup_irq(7, &irq7);
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ * generally used to activate any machine specific identification
+ * routines that may be needed before setup_arch() runs. On VISWS
+ * this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+ SYS_DESC_TABLE.length = 0;
+ MCA_bus = 0;
+ /* In PC-9800, APM BIOS version is written in BCD...?? */
+ APM_BIOS_INFO.version = (APM_BIOS_INFO.version & 0xff00)
+ | ((APM_BIOS_INFO.version & 0x00f0) >> 4);
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ * Called as the final act of trap_init(). Used in VISWS to initialise
+ * the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+}
+
+static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL};
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ * Must plug the system timer interrupt source at HZ into the IRQ listed
+ * in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+ setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ * The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
+ * along the MCA bus. Use this to hook into that chain if you will need
+ * it.
+ **/
+void __init mca_nmi_hook(void)
+{
+ /* If I recall correctly, there's a whole bunch of other things that
+ * we can do to check for NMI problems, but that's all I know about
+ * at the moment.
+ */
+
+ printk("NMI generated from unknown source!\n");
+}
+#endif
diff -Nru linux-2.5.61/arch/i386/mach-pc9800/topology.c linux98-2.5.61/arch/i386/mach-pc9800/topology.c
--- linux-2.5.61/arch/i386/mach-pc9800/topology.c 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.61/arch/i386/mach-pc9800/topology.c 2003-02-16 17:19:03.000000000 +0900
@@ -0,0 +1,68 @@
+/*
+ * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/cpu.h>
+
+struct i386_cpu cpu_devices[NR_CPUS];
+
+#ifdef CONFIG_NUMA
+#include <linux/mmzone.h>
+#include <asm/node.h>
+#include <asm/memblk.h>
+
+struct i386_node node_devices[MAX_NUMNODES];
+struct i386_memblk memblk_devices[MAX_NR_MEMBLKS];
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for (i = 0; i < num_online_nodes(); i++)
+ arch_register_node(i);
+ for (i = 0; i < NR_CPUS; i++)
+ if (cpu_possible(i)) arch_register_cpu(i);
+ for (i = 0; i < num_online_memblks(); i++)
+ arch_register_memblk(i);
+ return 0;
+}
+
+#else /* !CONFIG_NUMA */
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for (i = 0; i < NR_CPUS; i++)
+ if (cpu_possible(i)) arch_register_cpu(i);
+ return 0;
+}
+
+#endif /* CONFIG_NUMA */
+
+subsys_initcall(topology_init);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Feb 23 2003 - 22:00:17 EST