This is patchset to support NEC PC-9800 subarchitecture
against 2.5.61 (23/26).
SCSI host adapter support.
- BIOS parameter change for PC98.
- Add pc980155 driver for old PC98.
- wd33c93.c compile fix.
diff -Nru linux-2.5.60/drivers/scsi/Kconfig linux98-2.5.60/drivers/scsi/Kconfig
--- linux-2.5.60/drivers/scsi/Kconfig 2003-02-11 03:38:53.000000000 +0900
+++ linux98-2.5.60/drivers/scsi/Kconfig 2003-02-11 13:27:06.000000000 +0900
@@ -1729,6 +1729,13 @@
see the picture at
<http://amiga.multigraph.com/photos/oktagon.html>.
+config SCSI_PC980155
+ tristate "NEC PC-9801-55 SCSI support"
+ depends on X86_PC9800 && SCSI
+ help
+ If you have the NEC PC-9801-55 SCSI interface card or compatibles
+ for NEC PC-9801/PC-9821, say Y.
+
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
# bool 'GVP Turbo 040/060 SCSI support (EXPERIMENTAL)' CONFIG_GVP_TURBO_SCSI
endmenu
diff -Nru linux-2.5.60/drivers/scsi/Makefile linux98-2.5.60/drivers/scsi/Makefile
--- linux-2.5.60/drivers/scsi/Makefile 2003-02-11 03:38:49.000000000 +0900
+++ linux98-2.5.60/drivers/scsi/Makefile 2003-02-13 23:40:04.000000000 +0900
@@ -29,6 +29,7 @@
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
+obj-$(CONFIG_SCSI_PC980155) += pc980155.o wd33c93.o
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
diff -Nru linux/drivers/scsi/pc980155.c linux98/drivers/scsi/pc980155.c
--- linux/drivers/scsi/pc980155.c 1970-01-01 09:00:00.000000000 +0900
+++ linux98/drivers/scsi/pc980155.c 2003-02-17 21:05:25.000000000 +0900
@@ -0,0 +1,264 @@
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/blk.h>
+#include <linux/sched.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <linux/module.h>
+
+#include "scsi.h"
+#include "hosts.h"
+#include "wd33c93.h"
+#include "pc980155.h"
+#include "pc980155regs.h"
+
+#define DEBUG
+
+#include<linux/stat.h>
+
+static inline void __print_debug_info(unsigned int);
+static inline void __print_debug_info(unsigned int a){}
+#define print_debug_info() __print_debug_info(base_io);
+
+#define NR_BASE_IOS 4
+static int nr_base_ios = NR_BASE_IOS;
+static unsigned int base_ios[NR_BASE_IOS] = {0xcc0, 0xcd0, 0xce0, 0xcf0};
+static unsigned int SASR;
+static unsigned int SCMD;
+static wd33c93_regs regs = {&SASR, &SCMD};
+
+static struct Scsi_Host *pc980155_host = NULL;
+
+static void pc980155_intr_handle(int irq, void *dev_id, struct pt_regs *regp);
+
+inline void pc980155_dma_enable(unsigned int base_io){
+ outb(0x01, REG_CWRITE);
+ WAIT();
+}
+inline void pc980155_dma_disable(unsigned int base_io){
+ outb(0x02, REG_CWRITE);
+ WAIT();
+}
+
+
+static void pc980155_intr_handle(int irq, void *dev_id, struct pt_regs *regp)
+{
+ wd33c93_intr(pc980155_host);
+}
+
+static int dma_setup(Scsi_Cmnd *sc, int dir_in){
+ /*
+ * sc->SCp.this_residual : transfer count
+ * sc->SCp.ptr : distination address (virtual address)
+ * dir_in : data direction (DATA_OUT_DIR:0 or DATA_IN_DIR:1)
+ *
+ * if success return 0
+ */
+
+ /*
+ * DMA WRITE MODE
+ * bit 7,6 01b single mode (this mode only)
+ * bit 5 inc/dec (default:0 = inc)
+ * bit 4 auto initialize (normaly:0 = off)
+ * bit 3,2 01b memory -> io
+ * 10b io -> memory
+ * 00b verify
+ * bit 1,0 channel
+ */
+ disable_dma(sc->device->host->dma_channel);
+ set_dma_mode(sc->device->host->dma_channel, 0x40 | (dir_in ? 0x04 : 0x08));
+ clear_dma_ff(sc->device->host->dma_channel);
+ set_dma_addr(sc->device->host->dma_channel, virt_to_phys(sc->SCp.ptr));
+ set_dma_count(sc->device->host->dma_channel, sc->SCp.this_residual);
+#if 0
+#ifdef DEBUG
+ printk("D%d(%x)D", sc->SCp.this_residual);
+#endif
+#endif
+ enable_dma(sc->device->host->dma_channel);
+
+ pc980155_dma_enable(sc->device->host->io_port);
+
+ return 0;
+}
+
+static void dma_stop(struct Scsi_Host *instance, Scsi_Cmnd *sc, int status){
+ /*
+ * instance: Hostadapter's instance
+ * sc: scsi command
+ * status: True if success
+ */
+
+ pc980155_dma_disable(sc->device->host->io_port);
+
+ disable_dma(sc->device->host->dma_channel);
+}
+
+/* return non-zero on detection */
+static inline int pc980155_test_port(wd33c93_regs regs)
+{
+ /* Quick and dirty test for presence of the card. */
+ if (READ_AUX_STAT() == 0xff)
+ return 0;
+ return 1;
+}
+
+static inline int
+pc980155_getconfig(unsigned int base_io, wd33c93_regs regs,
+ unsigned char* irq, unsigned char* dma,
+ unsigned char* scsi_id)
+{
+ static unsigned char irqs[] = { 3, 5, 6, 9, 12, 13 };
+ unsigned char result;
+
+ printk(KERN_DEBUG "PC-9801-55: base_io=%x SASR=%x SCMD=%x\n",
+ base_io, *regs.SASR, *regs.SCMD);
+ result = read_wd33c93(regs, WD_RESETINT);
+ printk(KERN_DEBUG "PC-9801-55: getting config (%x)\n", result);
+ *scsi_id = result & 0x07;
+ *irq = (result >> 3) & 0x07;
+ if (*irq > 5) {
+ printk(KERN_ERR "PC-9801-55 (base %#x): impossible IRQ (%d)"
+ " - other device here?\n", base_io, *irq);
+ return 0;
+ }
+
+ *irq = irqs[*irq];
+ result = inb(REG_STATRD);
+ WAIT();
+ *dma = result & 0x03;
+ if (*dma == 1) {
+ printk(KERN_ERR
+ "PC-9801-55 (base %#x): impossible DMA channl (%d)"
+ " - other device here?\n", base_io, *dma);
+ return 0;
+ }
+#ifdef DEBUG
+ printk("PC-9801-55: end of getconfig\n");
+#endif
+ return 1;
+}
+
+/* return non-zero on detection */
+int scsi_pc980155_detect(Scsi_Host_Template* tpnt)
+{
+ unsigned int base_io;
+ unsigned char irq, dma, scsi_id;
+ int i;
+#ifdef DEBUG
+ unsigned char debug;
+#endif
+
+ for (i = 0; i < nr_base_ios; i++) {
+ base_io = base_ios[i];
+ SASR = REG_ADDRST;
+ SCMD = REG_CONTRL;
+
+ /* printk("PC-9801-55: SASR(%x = %x)\n", SASR, REG_ADDRST); */
+ if (!request_region(base_io, 6, "PC-9801-55"))
+ continue;
+ if (!pc980155_test_port(regs)) {
+ release_region(base_io, 6);
+ continue;
+ }
+
+ if (!pc980155_getconfig(base_io, regs, &irq, &dma, &scsi_id))
+ continue;
+#ifdef DEBUG
+ printk("PC-9801-55: config: base io = %x, irq = %d, dma channel = %d, scsi id = %d\n",
+ base_io, irq, dma, scsi_id);
+#endif
+ if (request_irq(irq, pc980155_intr_handle, 0, "PC-9801-55",
+ NULL)) {
+ printk(KERN_ERR
+ "PC-9801-55: unable to allocate IRQ %d\n",
+ irq);
+ continue;
+ }
+ if (request_dma(dma, "PC-9801-55")) {
+ printk(KERN_ERR "PC-9801-55: "
+ "unable to allocate DMA channel %d\n", dma);
+ free_irq(irq, NULL);
+ continue;
+ }
+
+ pc980155_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
+ pc980155_host->this_id = scsi_id;
+ pc980155_host->io_port = base_io;
+ pc980155_host->n_io_port = 6;
+ pc980155_host->irq = irq;
+ pc980155_host->dma_channel = dma;
+
+#ifdef DEBUG
+ printk("PC-9801-55: scsi host found at %x irq = %d, use dma channel %d.\n", base_io, irq, dma);
+ debug = read_aux_stat(regs);
+ printk("PC-9801-55: aux: %x ", debug);
+ debug = read_wd33c93(regs, 0x17);
+ printk("status: %x\n", debug);
+#endif
+
+ pc980155_int_enable(regs);
+
+ wd33c93_init(pc980155_host, regs, dma_setup, dma_stop,
+ WD33C93_FS_12_15);
+
+ return 1;
+ }
+
+ printk("PC-9801-55: not found\n");
+ return 0;
+}
+
+int pc980155_proc_info(char *buf, char **start, off_t off, int len,
+ int hostno, int in)
+{
+ /* NOT SUPPORTED YET! */
+
+ if (in) {
+ return -EPERM;
+ }
+ *start = buf;
+ return sprintf(buf, "Sorry, not supported yet.\n");
+}
+
+int pc980155_setup(char *str)
+{
+next:
+ if (!strncmp(str, "io:", 3)){
+ base_ios[0] = simple_strtoul(str+3,NULL,0);
+ nr_base_ios = 1;
+ while (*str > ' ' && *str != ',')
+ str++;
+ if (*str == ','){
+ str++;
+ goto next;
+ }
+ }
+ return 0;
+}
+
+int scsi_pc980155_release(struct Scsi_Host *pc980155_host)
+{
+#ifdef MODULE
+ pc980155_int_disable(regs);
+ release_region(pc980155_host->io_port, pc980155_host->n_io_port);
+ free_irq(pc980155_host->irq, NULL);
+ free_dma(pc980155_host->dma_channel);
+ wd33c93_release();
+#endif
+ return 1;
+}
+
+__setup("pc980155=", pc980155_setup);
+
+Scsi_Host_Template driver_template = SCSI_PC980155;
+
+#include "scsi_module.c"
diff -Nru linux/drivers/scsi/pc980155.h linux98/drivers/scsi/pc980155.h
--- linux/drivers/scsi/pc980155.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/drivers/scsi/pc980155.h 2002-12-15 12:05:05.000000000 +0900
@@ -0,0 +1,47 @@
+/*
+ * PC-9801-55 SCSI host adapter driver
+ *
+ * Copyright (C) 1997-2000 Kyoto University Microcomputer Club
+ * (Linux/98 project)
+ */
+
+#ifndef _SCSI_PC9801_55_H
+#define _SCSI_PC9801_55_H
+
+#include <linux/types.h>
+#include <linux/kdev_t.h>
+#include <scsi/scsicam.h>
+
+int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+int wd33c93_abort(Scsi_Cmnd *);
+int wd33c93_reset(Scsi_Cmnd *, unsigned int);
+int scsi_pc980155_detect(Scsi_Host_Template *);
+int scsi_pc980155_release(struct Scsi_Host *);
+int pc980155_proc_info(char *, char **, off_t, int, int, int);
+
+#ifndef CMD_PER_LUN
+#define CMD_PER_LUN 2
+#endif
+
+#ifndef CAN_QUEUE
+#define CAN_QUEUE 16
+#endif
+
+#define SCSI_PC980155 { .proc_name = "PC-9801-55", \
+ .name = "SCSI PC-9801-55", \
+ .proc_info = pc980155_proc_info, \
+ .detect = scsi_pc980155_detect, \
+ .release = scsi_pc980155_release, \
+ /* command: use queue command */ \
+ .queuecommand = wd33c93_queuecommand, \
+ .abort = wd33c93_abort, \
+ .reset = wd33c93_reset, \
+ .bios_param = scsicam_bios_param, \
+ .can_queue = CAN_QUEUE, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = CMD_PER_LUN, /* dont use link command */ \
+ .unchecked_isa_dma = 1, /* use dma **XXXX***/ \
+ .use_clustering = ENABLE_CLUSTERING }
+
+#endif /* _SCSI_PC9801_55_H */
diff -Nru linux/drivers/scsi/pc980155regs.h linux98/drivers/scsi/pc980155regs.h
--- linux/drivers/scsi/pc980155regs.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/drivers/scsi/pc980155regs.h 2001-12-03 18:44:10.000000000 +0900
@@ -0,0 +1,89 @@
+#ifndef __PC980155REGS_H
+#define __PC980155REGS_H
+
+#include "wd33c93.h"
+
+#define REG_ADDRST (base_io+0)
+#define REG_CONTRL (base_io+2)
+#define REG_CWRITE (base_io+4)
+#define REG_STATRD (base_io+4)
+
+#define WD_MEMORYBANK 0x30
+#define WD_RESETINT 0x33
+
+#if 0
+#define WAIT() outb(0x00,0x5f)
+#else
+#define WAIT() do{}while(0)
+#endif
+
+static inline uchar read_wd33c93(const wd33c93_regs regs, uchar reg_num)
+{
+ uchar data;
+ outb(reg_num, *regs.SASR);
+ WAIT();
+ data = inb(*regs.SCMD);
+ WAIT();
+ return data;
+}
+
+static inline uchar read_aux_stat(const wd33c93_regs regs)
+{
+ uchar result;
+ result = inb(*regs.SASR);
+ WAIT();
+ /* printk("PC-9801-55: regp->SASR(%x) = %x\n", regp->SASR, result); */
+ return result;
+}
+#define READ_AUX_STAT() read_aux_stat(regs)
+
+static inline void write_wd33c93(const wd33c93_regs regs, uchar reg_num,
+ uchar value)
+{
+ outb(reg_num, *regs.SASR);
+ WAIT();
+ outb(value, *regs.SCMD);
+ WAIT();
+}
+
+
+#define write_wd33c93_cmd(regs,cmd) write_wd33c93(regs,WD_COMMAND,cmd)
+
+static inline void write_wd33c93_count(const wd33c93_regs regs,
+ unsigned long value)
+{
+ outb(WD_TRANSFER_COUNT_MSB, *regs.SASR);
+ WAIT();
+ outb((value >> 16) & 0xff, *regs.SCMD);
+ WAIT();
+ outb((value >> 8) & 0xff, *regs.SCMD);
+ WAIT();
+ outb( value & 0xff, *regs.SCMD);
+ WAIT();
+}
+
+
+static inline unsigned long read_wd33c93_count(const wd33c93_regs regs)
+{
+unsigned long value;
+
+ outb(WD_TRANSFER_COUNT_MSB, *regs.SASR);
+ value = inb(*regs.SCMD) << 16;
+ value |= inb(*regs.SCMD) << 8;
+ value |= inb(*regs.SCMD);
+ return value;
+}
+
+static inline void write_wd33c93_cdb(const wd33c93_regs regs, unsigned int len,
+ unsigned char cmnd[])
+{
+ int i;
+ outb(WD_CDB_1, *regs.SASR);
+ for (i=0; i<len; i++)
+ outb(cmnd[i], *regs.SCMD);
+}
+
+#define pc980155_int_enable(regs) write_wd33c93(regs, WD_MEMORYBANK, read_wd33c93(regs, WD_MEMORYBANK) | 0x04)
+#define pc980155_int_disable(regs) write_wd33c93(regs, WD_MEMORYBANK, read_wd33c93(regs, WD_MEMORYBANK) & ~0x04)
+
+#endif
diff -Nru linux/drivers/scsi/scsi_scan.c linux98/drivers/scsi/scsi_scan.c
--- linux/drivers/scsi/scsi_scan.c 2002-12-24 14:21:04.000000000 +0900
+++ linux98/drivers/scsi/scsi_scan.c 2002-12-26 14:28:56.000000000 +0900
@@ -128,6 +128,7 @@
{"MITSUMI", "CD-R CR-2201CS", "6119", BLIST_NOLUN}, /* locks up */
{"RELISYS", "Scorpio", NULL, BLIST_NOLUN}, /* responds to all lun */
{"MICROTEK", "ScanMaker II", "5.61", BLIST_NOLUN}, /* responds to all lun */
+ {"NEC", "D3856", "0009", BLIST_NOLUN},
/*
* Other types of devices that have special flags.
diff -Nru linux/drivers/scsi/sd.c linux98/drivers/scsi/sd.c
--- linux/drivers/scsi/sd.c 2003-02-11 03:38:49.000000000 +0900
+++ linux98/drivers/scsi/sd.c 2003-02-14 00:24:33.000000000 +0900
@@ -46,6 +46,7 @@
#include <linux/blk.h>
#include <linux/blkpg.h>
#include <asm/uaccess.h>
+#include <asm/pc9800.h>
#include "scsi.h"
#include "hosts.h"
@@ -467,6 +468,61 @@
return 0;
}
+
+
+/* XXX - For now, we assume the first (i.e. having the least host_no)
+ real (i.e. non-emulated) host adapter shall be BIOS-controlled one.
+ We *SHOULD* invent another way. */
+
+static inline struct Scsi_Host *first_real_host(void)
+{
+ struct Scsi_Host *h = NULL;
+
+ while ((h = scsi_host_get_next(h)))
+ if (!h->hostt->emulated)
+ break;
+
+ return h;
+}
+
+int pc98_bios_param(struct block_device *bdev, int *ip)
+{
+ struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
+ struct scsi_device *sdp = sdkp->device;
+
+ if (sdp && first_real_host() == sdp->host && sdp->id < 7
+ && __PC9800SCA_TEST_BIT(PC9800SCA_DISK_EQUIPS, sdp->id))
+ {
+ const u8 *p = (&__PC9800SCA(u8, PC9800SCA_SCSI_PARAMS)
+ + sdp->id * 4);
+
+ ip[0] = p[1]; /* # of heads */
+ ip[1] = p[0]; /* # of sectors/track */
+ ip[2] = *(u16 *)&p[2] & 0x0fff; /* # of cylinders */
+ if (p[3] & (1 << 6)) { /* #-of-cylinders is 16-bit */
+ ip[2] |= (ip[0] & 0xf0) << 8;
+ ip[0] &= 0x0f;
+ }
+ return 0;
+ }
+
+ /* Assume PC-9801-92 compatible parameters for HAs without BIOS. */
+ ip[0] = 8;
+ ip[1] = 32;
+ ip[2] = sdkp->capacity / (8 * 32);
+ if (ip[2] > 65535) { /* if capacity >= 8GB */
+ /* Recent on-board adapters seem to use this parameter. */
+ ip[1] = 128;
+ ip[2] = sdkp->capacity / (8 * 128);
+ if (ip[2] > 65535) { /* if capacity >= 32GB */
+ /* Clip the number of cylinders. Currently this
+ is the limit that we deal with. */
+ ip[2] = 65535;
+ }
+ }
+ return 0;
+}
+
static int sd_hdio_getgeo(struct block_device *bdev, struct hd_geometry *loc)
{
struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
@@ -480,7 +536,9 @@
diskinfo[2] = sdkp->capacity >> 11;
/* override with calculated, extended default, or driver values */
- if (host->hostt->bios_param)
+ if (pc98)
+ pc98_bios_param(bdev, diskinfo);
+ else if (host->hostt->bios_param)
host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo);
else
scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
diff -Nru linux-2.5.61/drivers/scsi/wd33c93.c linux98-2.5.61/drivers/scsi/wd33c93.c
--- linux-2.5.61/drivers/scsi/wd33c93.c 2003-02-15 08:52:04.000000000 +0900
+++ linux98-2.5.61/drivers/scsi/wd33c93.c 2003-02-17 21:51:42.000000000 +0900
@@ -84,6 +84,7 @@
#include <linux/init.h>
#include <asm/irq.h>
#include <linux/blk.h>
+#include <linux/spinlock.h>
#include "scsi.h"
#include "hosts.h"
@@ -173,7 +174,11 @@
MODULE_PARM(setup_strings, "s");
#endif
+static spinlock_t wd_lock = SPIN_LOCK_UNLOCKED;
+#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE)
+#include "pc980155regs.h"
+#else /* !CONFIG_SCSI_PC980155 */
static inline uchar read_wd33c93(const wd33c93_regs regs, uchar reg_num)
{
@@ -203,6 +208,7 @@
*regs.SCMD = cmd;
mb();
}
+#endif /* CONFIG_SCSI_PC980155 */
static inline uchar read_1_byte(const wd33c93_regs regs)
@@ -220,6 +226,7 @@
return x;
}
+#if !defined(CONFIG_SCSI_PC980155) && !defined(CONFIG_SCSI_PC980155_MODULE)
static void write_wd33c93_count(const wd33c93_regs regs, unsigned long value)
{
@@ -244,6 +251,7 @@
mb();
return value;
}
+#endif /* !CONFIG_SCSI_PC980155 */
/* The 33c93 needs to be told which direction a command transfers its
@@ -316,9 +324,10 @@
struct WD33C93_hostdata *hostdata;
Scsi_Cmnd *tmp;
- hostdata = (struct WD33C93_hostdata *)cmd->host->hostdata;
+ hostdata = (struct WD33C93_hostdata *)cmd->device->host->hostdata;
-DB(DB_QUEUE_COMMAND,printk("Q-%d-%02x-%ld( ",cmd->target,cmd->cmnd[0],cmd->pid))
+DB(DB_QUEUE_COMMAND,printk("Q-%d-%02x-%ld( ",cmd->device->id,
+ cmd->cmnd[0],cmd->pid))
/* Set up a few fields in the Scsi_Cmnd structure for our own use:
* - host_scribble is the pointer to the next cmd in the input queue
@@ -401,7 +410,7 @@
* Go see if any of them are runnable!
*/
- wd33c93_execute(cmd->host);
+ wd33c93_execute(cmd->device->host);
DB(DB_QUEUE_COMMAND,printk(")Q-%ld ",cmd->pid))
@@ -426,7 +435,6 @@
struct WD33C93_hostdata *hostdata = (struct WD33C93_hostdata *)instance->hostdata;
const wd33c93_regs regs = hostdata->regs;
Scsi_Cmnd *cmd, *prev;
-int i;
DB(DB_EXECUTE,printk("EX("))
@@ -445,7 +453,7 @@
cmd = (Scsi_Cmnd *)hostdata->input_Q;
prev = 0;
while (cmd) {
- if (!(hostdata->busy[cmd->target] & (1 << cmd->lun)))
+ if (!(hostdata->busy[cmd->device->id] & (1 << cmd->device->lun)))
break;
prev = cmd;
cmd = (Scsi_Cmnd *)cmd->host_scribble;
@@ -468,7 +476,7 @@
hostdata->input_Q = (Scsi_Cmnd *)cmd->host_scribble;
#ifdef PROC_STATISTICS
- hostdata->cmd_cnt[cmd->target]++;
+ hostdata->cmd_cnt[cmd->device->id]++;
#endif
/*
@@ -476,9 +484,9 @@
*/
if (is_dir_out(cmd))
- write_wd33c93(regs, WD_DESTINATION_ID, cmd->target);
+ write_wd33c93(regs, WD_DESTINATION_ID, cmd->device->id);
else
- write_wd33c93(regs, WD_DESTINATION_ID, cmd->target | DSTID_DPD);
+ write_wd33c93(regs, WD_DESTINATION_ID, cmd->device->id | DSTID_DPD);
/* Now we need to figure out whether or not this command is a good
* candidate for disconnect/reselect. We guess to the best of our
@@ -516,7 +524,8 @@
goto no;
for (prev=(Scsi_Cmnd *)hostdata->input_Q; prev;
prev=(Scsi_Cmnd *)prev->host_scribble) {
- if ((prev->target != cmd->target) || (prev->lun != cmd->lun)) {
+ if ((prev->device->id != cmd->device->id)
+ || (prev->device->lun != cmd->device->lun)) {
for (prev=(Scsi_Cmnd *)hostdata->input_Q; prev;
prev=(Scsi_Cmnd *)prev->host_scribble)
prev->SCp.phase = 1;
@@ -529,19 +538,20 @@
cmd->SCp.phase = 1;
#ifdef PROC_STATISTICS
- hostdata->disc_allowed_cnt[cmd->target]++;
+ hostdata->disc_allowed_cnt[cmd->device->id]++;
#endif
no:
write_wd33c93(regs, WD_SOURCE_ID, ((cmd->SCp.phase)?SRCID_ER:0));
- write_wd33c93(regs, WD_TARGET_LUN, cmd->lun);
- write_wd33c93(regs, WD_SYNCHRONOUS_TRANSFER,hostdata->sync_xfer[cmd->target]);
- hostdata->busy[cmd->target] |= (1 << cmd->lun);
+ write_wd33c93(regs, WD_TARGET_LUN, cmd->device->lun);
+ write_wd33c93(regs, WD_SYNCHRONOUS_TRANSFER,
+ hostdata->sync_xfer[cmd->device->id]);
+ hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
if ((hostdata->level2 == L2_NONE) ||
- (hostdata->sync_stat[cmd->target] == SS_UNSET)) {
+ (hostdata->sync_stat[cmd->device->id] == SS_UNSET)) {
/*
* Do a 'Select-With-ATN' command. This will end with
@@ -565,8 +575,8 @@
* later, but at that time we'll negotiate for async by specifying a
* sync fifo depth of 0.
*/
- if (hostdata->sync_stat[cmd->target] == SS_UNSET)
- hostdata->sync_stat[cmd->target] = SS_FIRST;
+ if (hostdata->sync_stat[cmd->device->id] == SS_UNSET)
+ hostdata->sync_stat[cmd->device->id] = SS_FIRST;
hostdata->state = S_SELECTING;
write_wd33c93_count(regs, 0); /* guarantee a DATA_PHASE interrupt */
write_wd33c93_cmd(regs, WD_CMD_SEL_ATN);
@@ -589,9 +599,16 @@
* (take advantage of auto-incrementing)
*/
- *regs.SASR = WD_CDB_1;
- for (i=0; i<cmd->cmd_len; i++)
- *regs.SCMD = cmd->cmnd[i];
+#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE)
+ write_wd33c93_cdb(regs, cmd->cmd_len, cmd->cmnd);
+#else /* !CONFIG_SCSI_PC980155 */
+ {
+ int i;
+ *regs.SASR = WD_CDB_1;
+ for (i = 0; i < cmd->cmd_len; i++)
+ *regs.SCMD = cmd->cmnd[i];
+ }
+#endif /* CONFIG_SCSI_PC980155 */
/* The wd33c93 only knows about Group 0, 1, and 5 commands when
* it's doing a 'select-and-transfer'. To be safe, we write the
@@ -677,7 +694,7 @@
struct WD33C93_hostdata *hostdata;
unsigned long length;
- hostdata = (struct WD33C93_hostdata *)cmd->host->hostdata;
+ hostdata = (struct WD33C93_hostdata *)cmd->device->host->hostdata;
/* Normally, you'd expect 'this_residual' to be non-zero here.
* In a series of scatter-gather transfers, however, this
@@ -695,7 +712,8 @@
cmd->SCp.buffer->offset;
}
- write_wd33c93(regs, WD_SYNCHRONOUS_TRANSFER,hostdata->sync_xfer[cmd->target]);
+ write_wd33c93(regs, WD_SYNCHRONOUS_TRANSFER,
+ hostdata->sync_xfer[cmd->device->id]);
/* 'hostdata->no_dma' is TRUE if we don't even want to try DMA.
* Update 'this_residual' and 'ptr' after 'transfer_pio()' returns.
@@ -792,7 +810,7 @@
if (hostdata->dma == D_DMA_RUNNING) {
DB(DB_TRANSFER,printk("[%p/%d:",cmd->SCp.ptr,cmd->SCp.this_residual))
- hostdata->dma_stop(cmd->host, cmd, 1);
+ hostdata->dma_stop(cmd->device->host, cmd, 1);
hostdata->dma = D_DMA_OFF;
length = cmd->SCp.this_residual;
cmd->SCp.this_residual = read_wd33c93_count(regs);
@@ -815,7 +833,7 @@
}
cmd->result = DID_NO_CONNECT << 16;
- hostdata->busy[cmd->target] &= ~(1 << cmd->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->state = S_UNCONNECTED;
cmd->scsi_done(cmd);
@@ -849,16 +867,16 @@
/* construct an IDENTIFY message with correct disconnect bit */
- hostdata->outgoing_msg[0] = (0x80 | 0x00 | cmd->lun);
+ hostdata->outgoing_msg[0] = (0x80 | 0x00 | cmd->device->lun);
if (cmd->SCp.phase)
hostdata->outgoing_msg[0] |= 0x40;
- if (hostdata->sync_stat[cmd->target] == SS_FIRST) {
+ if (hostdata->sync_stat[cmd->device->id] == SS_FIRST) {
#ifdef SYNC_DEBUG
printk(" sending SDTR ");
#endif
- hostdata->sync_stat[cmd->target] = SS_WAITING;
+ hostdata->sync_stat[cmd->device->id] = SS_WAITING;
/* Tack on a 2nd message to ask about synchronous transfers. If we've
* been asked to do only asynchronous transfers on this device, we
@@ -869,7 +887,7 @@
hostdata->outgoing_msg[1] = EXTENDED_MESSAGE;
hostdata->outgoing_msg[2] = 3;
hostdata->outgoing_msg[3] = EXTENDED_SDTR;
- if (hostdata->no_sync & (1 << cmd->target)) {
+ if (hostdata->no_sync & (1 << cmd->device->id)) {
hostdata->outgoing_msg[4] = hostdata->default_sx_per/4;
hostdata->outgoing_msg[5] = 0;
}
@@ -995,8 +1013,8 @@
#ifdef SYNC_DEBUG
printk("-REJ-");
#endif
- if (hostdata->sync_stat[cmd->target] == SS_WAITING)
- hostdata->sync_stat[cmd->target] = SS_SET;
+ if (hostdata->sync_stat[cmd->device->id] == SS_WAITING)
+ hostdata->sync_stat[cmd->device->id] = SS_SET;
write_wd33c93_cmd(regs, WD_CMD_NEGATE_ACK);
hostdata->state = S_CONNECTED;
break;
@@ -1017,7 +1035,7 @@
switch (ucp[2]) { /* what's the EXTENDED code? */
case EXTENDED_SDTR:
id = calc_sync_xfer(ucp[3],ucp[4]);
- if (hostdata->sync_stat[cmd->target] != SS_WAITING) {
+ if (hostdata->sync_stat[cmd->device->id] != SS_WAITING) {
/* A device has sent an unsolicited SDTR message; rather than go
* through the effort of decoding it and then figuring out what
@@ -1035,16 +1053,16 @@
hostdata->outgoing_msg[3] = hostdata->default_sx_per/4;
hostdata->outgoing_msg[4] = 0;
hostdata->outgoing_len = 5;
- hostdata->sync_xfer[cmd->target] =
+ hostdata->sync_xfer[cmd->device->id] =
calc_sync_xfer(hostdata->default_sx_per/4,0);
}
else {
- hostdata->sync_xfer[cmd->target] = id;
+ hostdata->sync_xfer[cmd->device->id] = id;
}
#ifdef SYNC_DEBUG
-printk("sync_xfer=%02x",hostdata->sync_xfer[cmd->target]);
+printk("sync_xfer=%02x",hostdata->sync_xfer[cmd->device->id]);
#endif
- hostdata->sync_stat[cmd->target] = SS_SET;
+ hostdata->sync_stat[cmd->device->id] = SS_SET;
write_wd33c93_cmd(regs, WD_CMD_NEGATE_ACK);
hostdata->state = S_CONNECTED;
break;
@@ -1107,7 +1125,7 @@
lun = read_wd33c93(regs, WD_TARGET_LUN);
DB(DB_INTR,printk(":%d.%d",cmd->SCp.Status,lun))
hostdata->connected = NULL;
- hostdata->busy[cmd->target] &= ~(1 << cmd->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->state = S_UNCONNECTED;
if (cmd->SCp.Status == ILLEGAL_STATUS_BYTE)
cmd->SCp.Status = lun;
@@ -1195,7 +1213,7 @@
}
DB(DB_INTR,printk("UNEXP_DISC-%ld",cmd->pid))
hostdata->connected = NULL;
- hostdata->busy[cmd->target] &= ~(1 << cmd->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->state = S_UNCONNECTED;
if (cmd->cmnd[0] == REQUEST_SENSE && cmd->SCp.Status != GOOD)
cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
@@ -1227,7 +1245,7 @@
switch (hostdata->state) {
case S_PRE_CMP_DISC:
hostdata->connected = NULL;
- hostdata->busy[cmd->target] &= ~(1 << cmd->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->state = S_UNCONNECTED;
DB(DB_INTR,printk(":%d",cmd->SCp.Status))
if (cmd->cmnd[0] == REQUEST_SENSE && cmd->SCp.Status != GOOD)
@@ -1244,7 +1262,7 @@
hostdata->state = S_UNCONNECTED;
#ifdef PROC_STATISTICS
- hostdata->disc_done_cnt[cmd->target]++;
+ hostdata->disc_done_cnt[cmd->device->id]++;
#endif
break;
@@ -1278,7 +1296,7 @@
if (hostdata->selecting) {
cmd = (Scsi_Cmnd *)hostdata->selecting;
hostdata->selecting = NULL;
- hostdata->busy[cmd->target] &= ~(1 << cmd->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
cmd->host_scribble = (uchar *)hostdata->input_Q;
hostdata->input_Q = cmd;
}
@@ -1288,7 +1306,7 @@
if (cmd) {
if (phs == 0x00) {
- hostdata->busy[cmd->target] &= ~(1 << cmd->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
cmd->host_scribble = (uchar *)hostdata->input_Q;
hostdata->input_Q = cmd;
}
@@ -1364,7 +1382,7 @@
cmd = (Scsi_Cmnd *)hostdata->disconnected_Q;
patch = NULL;
while (cmd) {
- if (id == cmd->target && lun == cmd->lun)
+ if (id == cmd->device->id && lun == cmd->device->lun)
break;
patch = cmd;
cmd = (Scsi_Cmnd *)cmd->host_scribble;
@@ -1392,9 +1410,9 @@
*/
if (is_dir_out(cmd))
- write_wd33c93(regs, WD_DESTINATION_ID, cmd->target);
+ write_wd33c93(regs, WD_DESTINATION_ID, cmd->device->id);
else
- write_wd33c93(regs, WD_DESTINATION_ID, cmd->target | DSTID_DPD);
+ write_wd33c93(regs, WD_DESTINATION_ID, cmd->device->id | DSTID_DPD);
if (hostdata->level2 >= L2_RESELECT) {
write_wd33c93_count(regs, 0); /* we want a DATA_PHASE interrupt */
write_wd33c93(regs, WD_COMMAND_PHASE, 0x45);
@@ -1467,7 +1485,7 @@
struct WD33C93_hostdata *hostdata;
int i;
- instance = SCpnt->host;
+ instance = SCpnt->device->host;
hostdata = (struct WD33C93_hostdata *)instance->hostdata;
printk("scsi%d: reset. ", instance->host_no);
@@ -1503,9 +1521,9 @@
wd33c93_regs regs;
Scsi_Cmnd *tmp, *prev;
- disable_irq(cmd->host->irq);
+ disable_irq(cmd->device->host->irq);
- instance = cmd->host;
+ instance = cmd->device->host;
hostdata = (struct WD33C93_hostdata *)instance->hostdata;
regs = hostdata->regs;
@@ -1526,7 +1544,7 @@
cmd->result = DID_ABORT << 16;
printk("scsi%d: Abort - removing command %ld from input_Q. ",
instance->host_no, cmd->pid);
- enable_irq(cmd->host->irq);
+ enable_irq(cmd->device->host->irq);
cmd->scsi_done(cmd);
return SCSI_ABORT_SUCCESS;
}
@@ -1591,7 +1609,7 @@
sr = read_wd33c93(regs, WD_SCSI_STATUS);
printk("asr=%02x, sr=%02x.",asr,sr);
- hostdata->busy[cmd->target] &= ~(1 << cmd->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->connected = NULL;
hostdata->state = S_UNCONNECTED;
cmd->result = DID_ABORT << 16;
@@ -1599,7 +1617,7 @@
/* sti();*/
wd33c93_execute (instance);
- enable_irq(cmd->host->irq);
+ enable_irq(cmd->device->host->irq);
cmd->scsi_done(cmd);
return SCSI_ABORT_SUCCESS;
}
@@ -1616,7 +1634,7 @@
printk("scsi%d: Abort - command %ld found on disconnected_Q - ",
instance->host_no, cmd->pid);
printk("returning ABORT_SNOOZE. ");
- enable_irq(cmd->host->irq);
+ enable_irq(cmd->device->host->irq);
return SCSI_ABORT_SNOOZE;
}
tmp = (Scsi_Cmnd *)tmp->host_scribble;
@@ -1635,7 +1653,7 @@
/* sti();*/
wd33c93_execute (instance);
- enable_irq(cmd->host->irq);
+ enable_irq(cmd->device->host->irq);
printk("scsi%d: warning : SCSI command probably completed successfully"
" before abortion. ", instance->host_no);
return SCSI_ABORT_NOT_RUNNING;
@@ -1703,7 +1721,7 @@
return 1;
}
-__setup("wd33c93", wd33c93_setup);
+__setup("wd33c93=", wd33c93_setup);
/* check_setup_args() returns index if key found, 0 if not
@@ -1984,7 +2002,7 @@
if (hd->connected) {
cmd = (Scsi_Cmnd *)hd->connected;
sprintf(tbuf," %ld-%d:%d(%02x)",
- cmd->pid, cmd->target, cmd->lun, cmd->cmnd[0]);
+ cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp,tbuf);
}
}
@@ -1993,7 +2011,7 @@
cmd = (Scsi_Cmnd *)hd->input_Q;
while (cmd) {
sprintf(tbuf," %ld-%d:%d(%02x)",
- cmd->pid, cmd->target, cmd->lun, cmd->cmnd[0]);
+ cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp,tbuf);
cmd = (Scsi_Cmnd *)cmd->host_scribble;
}
@@ -2003,7 +2021,7 @@
cmd = (Scsi_Cmnd *)hd->disconnected_Q;
while (cmd) {
sprintf(tbuf," %ld-%d:%d(%02x)",
- cmd->pid, cmd->target, cmd->lun, cmd->cmnd[0]);
+ cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp,tbuf);
cmd = (Scsi_Cmnd *)cmd->host_scribble;
}
@@ -2037,4 +2055,10 @@
{
}
+EXPORT_SYMBOL(wd33c93_reset);
+EXPORT_SYMBOL(wd33c93_init);
+EXPORT_SYMBOL(wd33c93_release);
+EXPORT_SYMBOL(wd33c93_abort);
+EXPORT_SYMBOL(wd33c93_queuecommand);
+EXPORT_SYMBOL(wd33c93_intr);
MODULE_LICENSE("GPL");
diff -Nru linux/drivers/scsi/wd33c93.h linux98/drivers/scsi/wd33c93.h
--- linux/drivers/scsi/wd33c93.h 2002-10-12 13:21:35.000000000 +0900
+++ linux98/drivers/scsi/wd33c93.h 2002-10-12 14:18:53.000000000 +0900
@@ -186,8 +186,13 @@
/* This is what the 3393 chip looks like to us */
typedef struct {
+#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE)
+ volatile unsigned int *SASR;
+ volatile unsigned int *SCMD;
+#else
volatile unsigned char *SASR;
volatile unsigned char *SCMD;
+#endif
} wd33c93_regs;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Feb 23 2003 - 22:00:18 EST