This patch provides the following spelling fixes:
paticular -> particular
usefull -> useful
occurance -> occurrence
occurances -> occurrences
successfull -> successful
Documentation/DocBook/deviceiobook.tmpl | 2 +-
Documentation/networking/sk98lin.txt | 2 +-
Documentation/s390/s390dbf.txt | 2 +-
arch/i386/kernel/dmi_scan.c | 2 +-
arch/i386/pci/visws.c | 2 +-
arch/m68knommu/kernel/ints.c | 2 +-
drivers/net/3c501.c | 4 ++--
drivers/net/3c527.c | 2 +-
drivers/net/sk98lin/skgepnmi.c | 10 +++++-----
drivers/net/sungem.h | 2 +-
drivers/net/tlan.c | 4 ++--
drivers/s390/block/dasd.c | 2 +-
fs/befs/btree.c | 2 +-
fs/cifs/cifs_unicode.h | 2 +-
fs/eventpoll.c | 2 +-
fs/jffs2/compr_rtime.c | 2 +-
kernel/pm.c | 2 +-
sound/core/seq/seq_timer.c | 2 +-
18 files changed, 24 insertions(+), 24 deletions(-)
diff -ur linux-2.5-current/Documentation/DocBook/deviceiobook.tmpl linux/Documentation/DocBook/deviceiobook.tmpl
--- linux-2.5-current/Documentation/DocBook/deviceiobook.tmpl Wed Feb 19 07:34:57 2003
+++ linux/Documentation/DocBook/deviceiobook.tmpl Wed Feb 19 14:22:45 2003
@@ -152,7 +152,7 @@
<para>
While the basic functions are defined to be synchronous with respect
to each other and ordered with respect to each other the busses the
- devices sit on may themselves have asynchronocity. In paticular many
+ devices sit on may themselves have asynchronicity. In particular many
authors are burned by the fact that PCI bus writes are posted
asynchronously. A driver author must issue a read from the same
device to ensure that writes have occurred in the specific cases the
diff -ur linux-2.5-current/Documentation/networking/sk98lin.txt linux/Documentation/networking/sk98lin.txt
--- linux-2.5-current/Documentation/networking/sk98lin.txt Wed Feb 19 07:35:05 2003
+++ linux/Documentation/networking/sk98lin.txt Wed Feb 19 14:22:44 2003
@@ -187,7 +187,7 @@
this port is not "Sense". If autonegotiation is "On", all
three values are possible. If it is "Off", only "Full" and
"Half" are allowed.
- It is usefull if your link partner does not support all
+ It is useful if your link partner does not support all
possible combinations.
- Flow Control
diff -ur linux-2.5-current/Documentation/s390/s390dbf.txt linux/Documentation/s390/s390dbf.txt
--- linux-2.5-current/Documentation/s390/s390dbf.txt Wed Feb 19 07:35:06 2003
+++ linux/Documentation/s390/s390dbf.txt Wed Feb 19 14:22:44 2003
@@ -14,7 +14,7 @@
If the system still runs but only a subcomponent which uses dbf failes,
it is possible to look at the debug logs on a live system via the Linux proc
filesystem.
-The debug feature may also very usefull for kernel and driver development.
+The debug feature may also very useful for kernel and driver development.
Design:
-------
diff -ur linux-2.5-current/arch/i386/kernel/dmi_scan.c linux/arch/i386/kernel/dmi_scan.c
--- linux-2.5-current/arch/i386/kernel/dmi_scan.c Wed Feb 19 07:34:54 2003
+++ linux/arch/i386/kernel/dmi_scan.c Wed Feb 19 14:22:45 2003
@@ -440,7 +440,7 @@
{
printk(KERN_INFO " *** Possibly defective BIOS detected (irqtable)\n");
printk(KERN_INFO " *** Many BIOSes matching this signature have incorrect IRQ routing tables.\n");
- printk(KERN_INFO " *** If you see IRQ problems, in paticular SCSI resets and hangs at boot\n");
+ printk(KERN_INFO " *** If you see IRQ problems, in particular SCSI resets and hangs at boot\n");
printk(KERN_INFO " *** contact your hardware vendor and ask about updates.\n");
printk(KERN_INFO " *** Building an SMP kernel may evade the bug some of the time.\n");
#ifdef CONFIG_X86_IO_APIC
diff -ur linux-2.5-current/arch/i386/pci/visws.c linux/arch/i386/pci/visws.c
--- linux-2.5-current/arch/i386/pci/visws.c Wed Feb 19 07:35:07 2003
+++ linux/arch/i386/pci/visws.c Wed Feb 19 14:22:44 2003
@@ -52,7 +52,7 @@
pin--;
- /* Nothing usefull at PIIX4 pin 1 */
+ /* Nothing useful at PIIX4 pin 1 */
if (bus == pci_bus0 && slot == 4 && pin == 0)
return -1;
diff -ur linux-2.5-current/arch/m68knommu/kernel/ints.c linux/arch/m68knommu/kernel/ints.c
--- linux-2.5-current/arch/m68knommu/kernel/ints.c Wed Feb 19 07:34:44 2003
+++ linux/arch/m68knommu/kernel/ints.c Wed Feb 19 14:22:44 2003
@@ -214,7 +214,7 @@
/*
* Do we need these probe functions on the m68k?
*
- * ... may be usefull with ISA devices
+ * ... may be useful with ISA devices
*/
unsigned long probe_irq_on (void)
{
diff -ur linux-2.5-current/drivers/net/3c501.c linux/drivers/net/3c501.c
--- linux-2.5-current/drivers/net/3c501.c Wed Feb 19 07:34:38 2003
+++ linux/drivers/net/3c501.c Wed Feb 19 14:22:45 2003
@@ -494,7 +494,7 @@
* @regs: Register data (surplus to our requirements)
*
* Handle the ether interface interrupts. The 3c501 needs a lot more
- * hand holding than most cards. In paticular we get a transmit interrupt
+ * hand holding than most cards. In particular we get a transmit interrupt
* with a collision error because the board firmware isnt capable of rewinding
* its own transmit buffer pointers. It can however count to 16 for us.
*
@@ -684,7 +684,7 @@
* @dev: Device to pull the packets from
*
* We have a good packet. Well, not really "good", just mostly not broken.
- * We must check everything to see if it is good. In paticular we occasionally
+ * We must check everything to see if it is good. In particular we occasionally
* get wild packet sizes from the card. If the packet seems sane we PIO it
* off the card and queue it for the protocol layers.
*/
diff -ur linux-2.5-current/drivers/net/3c527.c linux/drivers/net/3c527.c
--- linux-2.5-current/drivers/net/3c527.c Wed Feb 19 07:35:02 2003
+++ linux/drivers/net/3c527.c Wed Feb 19 14:22:45 2003
@@ -227,7 +227,7 @@
* Because MCA bus is a real bus and we can scan for cards we could do a
* single scan for all boards here. Right now we use the passed in device
* structure and scan for only one board. This needs fixing for modules
- * in paticular.
+ * in particular.
*/
int __init mc32_probe(struct net_device *dev)
diff -ur linux-2.5-current/drivers/net/sk98lin/skgepnmi.c linux/drivers/net/sk98lin/skgepnmi.c
--- linux-2.5-current/drivers/net/sk98lin/skgepnmi.c Wed Feb 19 07:35:07 2003
+++ linux/drivers/net/sk98lin/skgepnmi.c Wed Feb 19 14:22:44 2003
@@ -236,7 +236,7 @@
* -Fixed bug for RX counters. On an RX overflow interrupt the high
* words of all RX counters were incremented.
* -SET operations on FLOWCTRL_MODE and LINK_MODE accept now the
- * value 0, which has no effect. It is usefull for multiple instance
+ * value 0, which has no effect. It is useful for multiple instance
* SETs.
*
* Revision 1.37 1998/11/20 08:02:04 mhaveman
@@ -1672,7 +1672,7 @@
* Description:
* Calls a general sub-function for all this stuff. The preset does
* the same as a set, but returns just before finally setting the
- * new value. This is usefull to check if a set might be successfull.
+ * new value. This is useful to check if a set might be successful.
* If as instance a -1 is passed, an array of values is supposed and
* all instance of the OID will be set.
*
@@ -1716,7 +1716,7 @@
* Description:
* Calls a general sub-function for all this stuff. The preset does
* the same as a set, but returns just before finally setting the
- * new value. This is usefull to check if a set might be successfull.
+ * new value. This is useful to check if a set might be successful.
* If as instance a -1 is passed, an array of values is supposed and
* all instance of the OID will be set.
*
@@ -1935,7 +1935,7 @@
* Description:
* Calls a general sub-function for all this set stuff. The preset does
* the same as a set, but returns just before finally setting the
- * new value. This is usefull to check if a set might be successfull.
+ * new value. This is useful to check if a set might be successful.
* The sub-function runs through the IdTable, checks which OIDs are able
* to set, and calls the handler function of the OID to perform the
* preset. The return value of the function will also be stored in
@@ -6813,7 +6813,7 @@
*
* Description:
* The COMMON module only tells us if the mode is half or full duplex.
- * But in the decade of auto sensing it is usefull for the user to
+ * But in the decade of auto sensing it is useful for the user to
* know if the mode was negotiated or forced. Therefore we have a
* look to the mode, which was last used by the negotiation process.
*
diff -ur linux-2.5-current/drivers/net/sungem.h linux/drivers/net/sungem.h
--- linux-2.5-current/drivers/net/sungem.h Wed Feb 19 07:35:02 2003
+++ linux/drivers/net/sungem.h Wed Feb 19 14:22:46 2003
@@ -562,7 +562,7 @@
*/
/* Statistics Registers. All of these registers are 16-bits and
- * track occurances of a specific event. GEM can be configured
+ * track occurrences of a specific event. GEM can be configured
* to interrupt the host cpu when any of these counters overflow.
* They should all be explicitly initialized to zero when the interface
* is brought up.
diff -ur linux-2.5-current/drivers/net/tlan.c linux/drivers/net/tlan.c
--- linux-2.5-current/drivers/net/tlan.c Wed Feb 19 07:34:42 2003
+++ linux/drivers/net/tlan.c Wed Feb 19 14:22:46 2003
@@ -1630,7 +1630,7 @@
* host_int The contents of the HOST_INT
* port.
*
- * This driver is structured to determine EOC occurances by
+ * This driver is structured to determine EOC occurrences by
* reading the CSTAT member of the list structure. Tx EOC
* interrupts are disabled via the DIO INTDIS register.
* However, TLAN chips before revision 3.0 didn't have this
@@ -1753,7 +1753,7 @@
* host_int The contents of the HOST_INT
* port.
*
- * This driver is structured to determine EOC occurances by
+ * This driver is structured to determine EOC occurrences by
* reading the CSTAT member of the list structure. Rx EOC
* interrupts are disabled via the DIO INTDIS register.
* However, TLAN chips before revision 3.0 didn't have this
diff -ur linux-2.5-current/drivers/s390/block/dasd.c linux/drivers/s390/block/dasd.c
--- linux-2.5-current/drivers/s390/block/dasd.c Wed Feb 19 07:34:57 2003
+++ linux/drivers/s390/block/dasd.c Wed Feb 19 14:22:44 2003
@@ -1582,7 +1582,7 @@
/*
* Cancels a request that was started with dasd_sleep_on_req.
- * This is usefull to timeout requests. The request will be
+ * This is useful to timeout requests. The request will be
* terminated if it is currently in i/o.
* Returns 1 if the request has been terminated.
*/
diff -ur linux-2.5-current/fs/befs/btree.c linux/fs/befs/btree.c
--- linux-2.5-current/fs/befs/btree.c Wed Feb 19 07:34:38 2003
+++ linux/fs/befs/btree.c Wed Feb 19 14:22:44 2003
@@ -41,7 +41,7 @@
/* Befs B+tree structure:
*
* The first thing in the tree is the tree superblock. It tells you
- * all kinds of usefull things about the tree, like where the rootnode
+ * all kinds of useful things about the tree, like where the rootnode
* is located, and the size of the nodes (always 1024 with current version
* of BeOS).
*
diff -ur linux-2.5-current/fs/cifs/cifs_unicode.h linux/fs/cifs/cifs_unicode.h
--- linux-2.5-current/fs/cifs/cifs_unicode.h Wed Feb 19 07:35:21 2003
+++ linux/fs/cifs/cifs_unicode.h Wed Feb 19 14:22:46 2003
@@ -99,7 +99,7 @@
* UniStrchr: Find a character in a string
*
* Returns:
- * Address of first occurance of character in string
+ * Address of first occurrence of character in string
* or NULL if the character is not in the string
*/
static inline wchar_t *
diff -ur linux-2.5-current/fs/eventpoll.c linux/fs/eventpoll.c
--- linux-2.5-current/fs/eventpoll.c Wed Feb 19 07:34:55 2003
+++ linux/fs/eventpoll.c Wed Feb 19 14:22:44 2003
@@ -97,7 +97,7 @@
/*
* Remove the item from the list and perform its initialization.
- * This is usefull for us because we can test if the item is linked
+ * This is useful for us because we can test if the item is linked
* using "EP_IS_LINKED(p)".
*/
#define EP_LIST_DEL(p) do { list_del(p); INIT_LIST_HEAD(p); } while (0)
diff -ur linux-2.5-current/fs/jffs2/compr_rtime.c linux/fs/jffs2/compr_rtime.c
--- linux-2.5-current/fs/jffs2/compr_rtime.c Wed Feb 19 07:34:42 2003
+++ linux/fs/jffs2/compr_rtime.c Wed Feb 19 14:22:46 2003
@@ -13,7 +13,7 @@
* Very simple lz77-ish encoder.
*
* Theory of operation: Both encoder and decoder have a list of "last
- * occurances" for every possible source-value; after sending the
+ * occurrences" for every possible source-value; after sending the
* first source-byte, the second byte indicated the "run" length of
* matches
*
diff -ur linux-2.5-current/kernel/pm.c linux/kernel/pm.c
--- linux-2.5-current/kernel/pm.c Wed Feb 19 07:34:43 2003
+++ linux/kernel/pm.c Wed Feb 19 14:22:45 2003
@@ -145,7 +145,7 @@
* and conflicting.
*
* WARNING: Calling pm_send directly is not generally recommended, in
- * paticular there is no locking against the pm_dev going away. The
+ * particular there is no locking against the pm_dev going away. The
* caller must maintain all needed locking or have 'inside knowledge'
* on the safety. Also remember that this function is not locked against
* pm_unregister. This means that you must handle SMP races on callback
diff -ur linux-2.5-current/sound/core/seq/seq_timer.c linux/sound/core/seq/seq_timer.c
--- linux-2.5-current/sound/core/seq/seq_timer.c Wed Feb 19 07:35:08 2003
+++ linux/sound/core/seq/seq_timer.c Wed Feb 19 14:22:44 2003
@@ -401,7 +401,7 @@
return cur_time;
}
-/* TODO: use interpolation on tick queue (will only be usefull for very
+/* TODO: use interpolation on tick queue (will only be useful for very
high PPQ values) */
snd_seq_tick_time_t snd_seq_timer_get_cur_tick(seq_timer_t *tmr)
{
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Feb 23 2003 - 22:00:27 EST