Hi All,
May be you will say that this has been answered somewhere, but I am not
really able to understand what to do?
I recently installed RHL 8.0 on a SGI1200 server. The server has
"Adaptec AIC-7896 SCSI BIOS v2.20S1B1" installed.
When I boot the system, the two SCSI channels are recognised, and then the
system is not able to initialise. The partial error codes are:
aic7xxx_abort returns 0x2002
SCSI 0:0:0:0: Attempting to queue TARGET RESET message
SCSI 0:0:0:0: Is not an active device
The system then probes the SCSI 0:0:1:0 channel upto SCSI 0:0:15:0 and
then goes for SCSI channel 2, for all the 15 devices.
Can anyone please tell me what should I do? The system was earlier running
on RHL 6.2
Thanx in advance.
With Best Regards
HimS
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Feb 23 2003 - 22:00:28 EST