Hello List,
I'm not sure why, but the current kernel source tree doesn't support some
of the Keyspan USB/Serial adapter products (49WLC and MPR). There is code
at: http://www.keyspan.com/support/linux/files/currentversion/rev2003jan31/
but it only works with 2.4.18 or 2.4.19. Keyspan seems to think the code
is current and they didn't want my patches. Here they are for posterity.
Note: I did not include the firmware header files in the patch. They can
be obtained at the URL above.
Best regards,
Jeffrey S. Laing
kernel1@jsl.com
--- linux-2.4.21-pre4.orig/drivers/usb/serial/Config.in Thu Feb 20 14:27:33 2003
+++ linux/drivers/usb/serial/Config.in Tue Feb 18 18:02:28 2003
@@ -6,36 +6,37 @@
dep_tristate 'USB Serial Converter support' CONFIG_USB_SERIAL $CONFIG_USB
if [ "$CONFIG_USB_SERIAL" != "n" ]; then
- dep_bool ' USB Serial Converter verbose debug' CONFIG_USB_SERIAL_DEBUG $CONFIG_USB_SERIAL
+ dep_mbool ' USB Serial Converter verbose debug' CONFIG_USB_SERIAL_DEBUG $CONFIG_USB_SERIAL
dep_mbool ' USB Generic Serial Driver' CONFIG_USB_SERIAL_GENERIC $CONFIG_USB_SERIAL
- dep_tristate ' USB Belkin and Peracom Single Port Serial Driver' CONFIG_USB_SERIAL_BELKIN $CONFIG_USB_SERIAL
- dep_tristate ' USB ConnectTech WhiteHEAT Serial Driver' CONFIG_USB_SERIAL_WHITEHEAT $CONFIG_USB_SERIAL
+ dep_tristate ' USB Belkin and Peracom Single Port Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_BELKIN $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
+ dep_tristate ' USB ConnectTech WhiteHEAT Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_WHITEHEAT $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB Digi International AccelePort USB Serial Driver' CONFIG_USB_SERIAL_DIGI_ACCELEPORT $CONFIG_USB_SERIAL
- dep_tristate ' USB Empeg empeg-car Mark I/II Driver' CONFIG_USB_SERIAL_EMPEG $CONFIG_USB_SERIAL
- dep_tristate ' USB FTDI Single Port Serial Driver' CONFIG_USB_SERIAL_FTDI_SIO $CONFIG_USB_SERIAL
+ dep_tristate ' USB Empeg empeg-car Mark I/II Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_EMPEG $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
+ dep_tristate ' USB FTDI Single Port Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_FTDI_SIO $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB Handspring Visor / Palm m50x / Sony Clie Driver' CONFIG_USB_SERIAL_VISOR $CONFIG_USB_SERIAL
- dep_tristate ' USB Compaq iPAQ / HP Jornada / Casio EM500 Driver' CONFIG_USB_SERIAL_IPAQ $CONFIG_USB_SERIAL
+ dep_tristate ' USB Compaq iPAQ Driver' CONFIG_USB_SERIAL_IPAQ $CONFIG_USB_SERIAL
dep_tristate ' USB IR Dongle Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_IR $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
- dep_tristate ' USB Inside Out Edgeport Serial Driver' CONFIG_USB_SERIAL_EDGEPORT $CONFIG_USB_SERIAL
- dep_tristate ' USB Inside Out Edgeport Serial Driver (TI devices)' CONFIG_USB_SERIAL_EDGEPORT_TI $CONFIG_USB_SERIAL
+ dep_tristate ' USB Inside Out Edgeport Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_EDGEPORT $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB Keyspan PDA Single Port Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_KEYSPAN_PDA $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
- dep_tristate ' USB Keyspan USA-xxx Serial Driver' CONFIG_USB_SERIAL_KEYSPAN $CONFIG_USB_SERIAL
+ dep_tristate ' USB Keyspan USA-xxx Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_KEYSPAN $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
if [ "$CONFIG_USB_SERIAL_KEYSPAN" != "n" ]; then
- bool ' USB Keyspan USA-28 Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28
- bool ' USB Keyspan USA-28X Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28X
- bool ' USB Keyspan USA-28XA Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28XA
- bool ' USB Keyspan USA-28XB Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28XB
- bool ' USB Keyspan USA-19 Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19
- bool ' USB Keyspan USA-18X Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA18X
- bool ' USB Keyspan USA-19W Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19W
- bool ' USB Keyspan USA-19QW Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19QW
- bool ' USB Keyspan USA-19QI Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19QI
- bool ' USB Keyspan USA-49W Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA49W
+ bool ' USB Keyspan USA-28 Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28 $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan USA-28X Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28X $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan USA-28XA Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28XA $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan USA-28XB Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA28XB $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan USA-19 Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19 $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan USA-19QI Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19QI $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan USA-18X Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA18X $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan USA-19W Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19W $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan USA-19QW Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA19QW $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan MPR Firmware' CONFIG_USB_SERIAL_KEYSPAN_MPR $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan USA-49W Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA49W $CONFIG_USB_SERIAL_KEYSPAN
+ bool ' USB Keyspan USA-49WLC Firmware' CONFIG_USB_SERIAL_KEYSPAN_USA49WLC $CONFIG_USB_SERIAL_KEYSPAN
fi
- dep_tristate ' USB MCT Single Port Serial Driver' CONFIG_USB_SERIAL_MCT_U232 $CONFIG_USB_SERIAL
- dep_tristate ' USB KL5KUSB105 (Palmconnect) Driver' CONFIG_USB_SERIAL_KLSI $CONFIG_USB_SERIAL
+ dep_tristate ' USB MCT Single Port Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_MCT_U232 $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
+ dep_tristate ' USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_KLSI $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB KOBIL chipcard reader (EXPERIMENTAL)' CONFIG_USB_SERIAL_KOBIL_SCT $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
- dep_tristate ' USB Prolific 2303 Single Port Serial Driver' CONFIG_USB_SERIAL_PL2303 $CONFIG_USB_SERIAL
+ dep_tristate ' USB Prolific 2303 Single Port Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_PL2303 $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)' CONFIG_USB_SERIAL_CYBERJACK $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB Xircom / Entregra Single Port Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_XIRCOM $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_OMNINET $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
--- linux-2.4.21-pre4.orig/drivers/usb/serial/keyspan.c Thu Feb 20 14:27:33 2003
+++ linux/drivers/usb/serial/keyspan.c Thu Feb 20 14:42:49 2003
@@ -28,6 +28,22 @@
Change History
+ Wed Feb 19 22:00:00 PST 2003 (Jeffrey S. Laing <keyspan@jsl.com>)
+ Merged the current (1/31/03) Keyspan code with the current (2.4.21-pre4)
+ Linux source tree. The Linux tree lacked support for the 49WLC and
+ others. The Keyspan patches didn't work with the current kernel.
+
+ Wed Apr 25 12:00:00 PST 2002 (Keyspan)
+ Started with Hugh Blemings' code dated Jan 17, 2002. All adapters
+ now supported (including QI and QW). Modified port open, port
+ close, and send setup() logic to fix various data and endpoint
+ synchronization bugs and device LED status bugs. Changed keyspan_
+ write_room() to accurately return transmit buffer availability.
+ Changed forwardingLength from 1 to 16 for all adapters.
+
+ Fri Oct 12 16:45:00 EST 2001
+ Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV)
+
Wed Apr 25 12:00:00 PST 2002 (Keyspan)
Started with Hugh Blemings' code dated Jan 17, 2002. All adapters
now supported (including QI and QW). Modified port open, port
@@ -71,6 +87,8 @@
Sat Jul 8 11:11:48 EST 2000 Hugh
First public release - nothing works except the firmware upload.
Tested on PPC and x86 architectures, seems to behave...
+
+ 2003jan30 LPM add support for the 49WLC and MPR
*/
@@ -102,7 +120,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.1.3"
+#define DRIVER_VERSION "v1.1.4"
#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
#define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
@@ -188,7 +207,7 @@
return 0;
}
-static void __exit keyspan_exit (void)
+void __exit keyspan_exit (void)
{
usb_serial_deregister (&keyspan_pre_device);
usb_serial_deregister (&keyspan_1port_device);
@@ -904,6 +922,9 @@
/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
}
+ // if the device is a USA49x, determine whether it is an W or WLC model
+ // and set the baud clock accordingly
+
keyspan_send_setup(port, 1);
//mdelay(100);
keyspan_set_termios(port, NULL);
@@ -1012,6 +1034,11 @@
fw_name = "USA19QI";
break;
+ case keyspan_mpr_pre_product_id:
+ record = &keyspan_mpr_firmware[0];
+ fw_name = "MPR";
+ break;
+
case keyspan_usa19qw_pre_product_id:
record = &keyspan_usa19qw_firmware[0];
fw_name = "USA19QI";
@@ -1032,6 +1059,11 @@
fw_name = "USA49W";
break;
+ case keyspan_usa49wlc_pre_product_id:
+ record = &keyspan_usa49wlc_firmware[0];
+ fw_name = "USA49WLC";
+ break;
+
default:
record = NULL;
fw_name = "Unknown";
@@ -1322,7 +1355,7 @@
div, /* divisor */
cnt; /* inverse of divisor (programmed into 8051) */
- dbg ("%s - %d.", __FUNCTION__, baud_rate);
+ dbg (__FUNCTION__ " %d.\n", baud_rate);
/* prevent divide by zero */
if ((b16 = baud_rate * 16L) == 0)
--- linux-2.4.21-pre4.orig/drivers/usb/serial/keyspan.h Thu Nov 28 15:53:14 2002
+++ linux/drivers/usb/serial/keyspan.h Thu Feb 20 15:09:29 2003
@@ -136,6 +133,12 @@
static const struct ezusb_hex_record *keyspan_usa19qi_firmware = NULL;
#endif
+#ifdef CONFIG_USB_SERIAL_KEYSPAN_MPR
+ #include "keyspan_mpr_fw.h"
+#else
+ static const struct ezusb_hex_record *keyspan_mpr_firmware = NULL;
+#endif
+
#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QW
#include "keyspan_usa19qw_fw.h"
#else
@@ -160,6 +163,12 @@
static const struct ezusb_hex_record *keyspan_usa49w_firmware = NULL;
#endif
+#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49WLC
+ #include "keyspan_usa49wlc_fw.h"
+#else
+ static const struct ezusb_hex_record *keyspan_usa49wlc_firmware = NULL;
+#endif
+
/* Values used for baud rate calculation - device specific */
#define KEYSPAN_INVALID_BAUD_RATE (-1)
#define KEYSPAN_BAUD_RATE_OK (0)
@@ -182,6 +191,7 @@
#define keyspan_usa18x_pre_product_id 0x0105
#define keyspan_usa19_pre_product_id 0x0103
#define keyspan_usa19qi_pre_product_id 0x010b
+#define keyspan_mpr_pre_product_id 0x011b
#define keyspan_usa19qw_pre_product_id 0x0118
#define keyspan_usa19w_pre_product_id 0x0106
#define keyspan_usa28_pre_product_id 0x0101
@@ -189,6 +199,7 @@
#define keyspan_usa28xa_pre_product_id 0x0114
#define keyspan_usa28xb_pre_product_id 0x0113
#define keyspan_usa49w_pre_product_id 0x0109
+#define keyspan_usa49wlc_pre_product_id 0x011a
/* Product IDs post-renumeration. Note that the 28x and 28xb
have the same id's post-renumeration but behave identically
@@ -196,6 +207,7 @@
#define keyspan_usa18x_product_id 0x0112
#define keyspan_usa19_product_id 0x0107
#define keyspan_usa19qi_product_id 0x010c
+#define keyspan_mpr_product_id 0x011c
#define keyspan_usa19qw_product_id 0x0119
#define keyspan_usa19w_product_id 0x0108
#define keyspan_usa28_product_id 0x010f
@@ -203,6 +215,7 @@
#define keyspan_usa28xa_product_id 0x0115
#define keyspan_usa28xb_product_id 0x0110
#define keyspan_usa49w_product_id 0x010a
+#define keyspan_usa49wlc_product_id 0x012a
struct keyspan_device_details {
@@ -394,6 +407,22 @@
baudclk: KEYSPAN_USA49W_BAUDCLK,
};
+static const struct keyspan_device_details usa49wlc_device_details = {
+ product_id: keyspan_usa49wlc_product_id,
+ msg_format: msg_usa49,
+ num_ports: 4,
+ indat_endp_flip: 0,
+ outdat_endp_flip: 0,
+ indat_endpoints: {0x81, 0x82, 0x83, 0x84},
+ outdat_endpoints: {0x01, 0x02, 0x03, 0x04},
+ inack_endpoints: {-1, -1, -1, -1},
+ outcont_endpoints: {-1, -1, -1, -1},
+ instat_endpoint: 0x87,
+ glocont_endpoint: 0x07,
+ calculate_baud_rate: keyspan_usa19w_calc_baud,
+ baudclk: KEYSPAN_USA19W_BAUDCLK,
+};
+
static const struct keyspan_device_details *keyspan_devices[] = {
&usa18x_device_details,
&usa19_device_details,
@@ -405,6 +434,7 @@
&usa28xa_device_details,
/* 28xb not required as it renumerates as a 28x */
&usa49w_device_details,
+ &usa49wlc_device_details,
NULL,
};
@@ -414,21 +444,25 @@
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
{ } /* Terminating entry */
};
@@ -441,11 +475,13 @@
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
{ } /* Terminating entry */
};
@@ -455,6 +491,7 @@
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
{ } /* Terminating entry */
};
@@ -462,11 +499,13 @@
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
{ } /* Terminating entry */
};
static struct usb_device_id keyspan_4port_ids[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
{ } /* Terminating entry */
};
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Feb 23 2003 - 22:00:31 EST