>> Tested, boots, and runs on NUMA-Q. Trims 6s of 41s off kernel compiles.
Odd. I get nothing like that difference.
Kernbench-2: (make -j N vmlinux, where N = 2 x num_cpus)
Elapsed User System CPU
2.5.63-mjb2 44.43 557.16 95.31 1467.83
2.5.63-mjb2-pernode 44.21 556.92 95.16 1474.33
Kernbench-16: (make -j N vmlinux, where N = 16 x num_cpus)
Elapsed User System CPU
2.5.63-mjb2 45.39 560.26 117.25 1492.33
2.5.63-mjb2-pernode 44.78 560.24 112.20 1501.17
No difference for make -j32, definite improvement in the systime for -j256.
Measurement error? Different test (make -j 65536? ;-))
The full output of the time command (systime, user, elapsed, etc)
and profiles might be useful in working out why we have this disparity.
(diffprofile at end)
It also seems to slow SDET down a fraction:
SDET 1 (see disclaimer)
Throughput Std. Dev
2.5.63-mjb2 100.0% 0.9%
2.5.63-mjb2-pernode 92.8% 2.9%
SDET 2 (see disclaimer)
Throughput Std. Dev
2.5.63-mjb2 100.0% 6.5%
2.5.63-mjb2-pernode 97.7% 3.2%
SDET 4 (see disclaimer)
Throughput Std. Dev
2.5.63-mjb2 100.0% 2.3%
2.5.63-mjb2-pernode 97.9% 3.5%
SDET 8 (see disclaimer)
Throughput Std. Dev
2.5.63-mjb2 100.0% 3.3%
2.5.63-mjb2-pernode 101.0% 2.6%
SDET 16 (see disclaimer)
Throughput Std. Dev
2.5.63-mjb2 100.0% 2.7%
2.5.63-mjb2-pernode 103.8% 3.1%
SDET 32 (see disclaimer)
Throughput Std. Dev
2.5.63-mjb2 100.0% 0.6%
2.5.63-mjb2-pernode 96.0% 1.4%
SDET 64 (see disclaimer)
Throughput Std. Dev
2.5.63-mjb2 100.0% 1.2%
2.5.63-mjb2-pernode 96.8% 1.2%
Any chance you could split the patch up a bit, maybe roughly along the
lines of the following groupings:
> (6) per_cpu()/__get_cpu_var() needs to parenthesize the cpu arg
> (2) make irq_stat[] per_cpu, x86-only
> (3) make mmu_gathers[] per_cpu, with comcomitant divorce from asm-generic
> (16) make task_cache per_cpu
> (17) make runqueues[] per_cpu
> (19) make reap_timers[] per_cpu
> (1) reuse the arch/i386/discontigmem.c per-node mem_map[] virtual remap
> to remap node-local memory backing per_cpu and per_node areas
> (8) added MAX_NODE_CPUS for pessimistic sizing of virtual remapping arenas
> (13) declare MAX_NODE_CPUS in include/asm-i386/srat.h
> (4) delay discontig zone_sizes_init() to dodge bootstrap order issues
> (5) add .data.pernode section handling in vmlinux.lds.S
> (7) introduced asm-generic/pernode.h to do similar things as percpu.h
> (10) #undef asm-i386/per{cpu,node}.h's __GENERIC_PER_{CPU,NODE}
> (11) declare setup_per_cpu_areas() in asm-i386/percpu.h
> (12) make an asm-i386/pernode.h stub header like include/asm-generic/pernode.h
> (15) call setup_per_node_areas() in init/main.c, with analogous hooks
> (18) make node_nr_running[] per_node
> (14) make zone_table[] per_node
> (9) fix return type error in NUMA-Q get_zholes_size()
diffprofile for kernbench -j256
(+ worse with patch, - better)
60 125.0% page_address
30 3.9% d_lookup
28 18.4% path_lookup
15 10.5% do_schedule
12 63.2% __pagevec_lru_add_active
11 47.8% bad_range
10 15.9% kmap_atomic
...
-11 -18.3% file_ra_state_init
-11 -3.9% zap_pte_range
-12 -5.5% page_add_rmap
-14 -6.8% file_move
-15 -17.9% strnlen_user
-20 -4.3% vm_enough_memory
-38 -13.9% __fput
-39 -8.4% get_empty_filp
-43 -14.5% atomic_dec_and_lock
-389 -8.3% default_idle
-552 -26.1% .text.lock.file_table
-931 -5.6% total
diffprofile for SDET 64:
(+ worse with patch, - better)
1294 2.7% total
1057 3.1% default_idle
225 10.5% __down
86 13.1% __wake_up
48 66.7% page_address
41 4.8% do_schedule
37 77.1% kmap_atomic
25 12.8% __copy_to_user_ll
20 4.5% page_remove_rmap
16 320.0% bad_range
15 13.0% path_lookup
14 18.4% copy_mm
12 4.0% release_pages
11 33.3% read_block_bitmap
11 2.3% copy_page_range
10 25.6% path_release
10 3.2% page_add_rmap
9 16.7% free_hot_cold_page
9 450.0% page_waitqueue
7 36.8% ext2_get_group_desc
6 12.0% proc_pid_stat
6 5.0% vfs_read
6 26.1% kmem_cache_alloc
6 35.3% alloc_inode
6 46.2% mark_page_accessed
5 22.7% ext2_update_inode
5 45.5% __blk_queue_bounce
5 55.6% exec_mmap
...
-5 -23.8% real_lookup
-5 -25.0% exit_mmap
-5 -25.0% do_page_cache_readahead
-5 -3.6% do_anonymous_page
-5 -7.9% follow_mount
-5 -18.5% generic_delete_inode
-5 -45.5% kunmap_high
-6 -17.6% __copy_user_intel
-7 -23.3% dentry_open
-8 -40.0% default_wake_function
-8 -10.1% filemap_nopage
-9 -12.2% __find_get_block_slow
-9 -8.7% ext2_free_blocks
-11 -5.9% atomic_dec_and_lock
-13 -9.0% __fput
-15 -75.0% mark_buffer_dirty
-19 -5.3% find_get_page
-20 -23.5% file_move
-22 -20.8% __find_get_block
-37 -14.1% get_empty_filp
-175 -39.1% .text.lock.file_table
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Mar 07 2003 - 22:00:18 EST