I've used tried the -mm-kernels since they've actually made
2.5-kernels usable on my laptop lately (Compaq Evo800c), but
2.5.64-mm2 and onwards doesnt work with X anymore. I run 4.3.0-r1 from
the Gentoo unstable "branch".
with -mm1 I X coming up just nicely, and now the screen just goes
black after trying to start X, and it seems related to DRM. With
-mm[56] the last bit I see in my X startup is this:
(==) RADEON(0): Write-combining range (0x88000000,0x4000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
[HANG]
With -mm1 and 2.4.21preX it shows this:
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] loaded kernel module for "radeon" driver
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf098d000
(II) RADEON(0): [drm] mapped SAREA 0xf098d000 to 0x40013000
.
.
.
Although it hangs under -mm[56] the machine will still respond to
CRTL-ALT-DEL and reboot nicely. The only modification to the kernel
I've done it backing out smalldevfs (Gentoo likes to have the full
thing). I've also tried having the DRM-stuff as modules and as
compiled in, no difference
The graphics adapter is a Radeon with 64Mb RAM:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation: Unknown device 004a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 88000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at 80380000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Other than that 2.5.64-mm6 is very usable, but only in text mode.
mvh,
A
Andrew Morton <akpm@digeo.com> writes:
> [SNIP]
-- Alexander Hoogerhuis | alexh@ihatent.com CCNP - CCDP - MCNE - CCSE | +47 908 21 485 "You have zero privacy anyway. Get over it." --Scott McNealy - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Mar 15 2003 - 22:00:38 EST