[BK PATCH] More USB changes for 2.5.64

From: Greg KH (greg@kroah.com)
Date: Mon Mar 17 2003 - 14:46:56 EST

Next message: Pete Zaitcev: "Re: Read Hat 7.3 and 8.0 compilation problems"
Previous message: Jamie Lokier: "Re: Linux-2.4.20 modem control"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

Here are some more small USB changes. Included here is a spelling
patch, more USB devices are now supported, some memory leaks on error
paths fixed, and a few minor cleanups in a few different drivers.

Please pull from: bk://linuxusb.bkbits.net/linus-2.5

thanks,

greg k-h

<green@linuxhacker.ru>:
  o USB: memleak in Edgeport USB Serial Converter driver
  o USB: more Edgeport USB Serial Converter driver stuff
  o Memleak in KOBIL USB Smart Card Terminal Driver

<msdemlei@cl.uni-heidelberg.de>:
o USB: Patch for DSBR-100 driver

David Brownell <david-b@pacbell.net>:
o USB ohci: "registers" sysfs file

Duncan Sands <baldrick@wanadoo.fr>:
o USB speedtouch: send path optimization

Greg Kroah-Hartman <greg@kroah.com>:
  o USB: added support for Ericsson data cable to pl2303 driver
  o USB: fixup from previous io_ti.c patch
  o USB: Added support for the Sony Clie NZ90V device
  o USB: fix up a comment in usb_unlink()
  o USB: added support for the palm M100

Henning Meier-Geinitz <henning@meier-geinitz.de>:
o USB: Fix crash in read/write/ioctl in scanner driver

Johannes Erdfelt <johannes@erdfelt.com>:
o uhci-hcd.c 2.5 finish completions in correct order

Steven Cole <elenstev@mesatop.com>:
o USB: spelling fixes for drivers/usb

-----
Long changelog:

ChangeSet@1.1094.6.14, 2003-03-14 15:06:18-08:00, greg@kroah.com
  [PATCH] USB: added support for Ericsson data cable to pl2303 driver.

  Thanks to kai.engert@gmx.de for the needed information

drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 3 +++
2 files changed, 4 insertions(+)
------

ChangeSet@1.1094.6.13, 2003-03-14 12:06:50-08:00, greg@kroah.com
[PATCH] USB: fixup from previous io_ti.c patch

drivers/usb/serial/io_ti.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
------

ChangeSet@1.1094.6.12, 2003-03-14 12:05:46-08:00, green@linuxhacker.ru
[PATCH] USB: memleak in Edgeport USB Serial Converter driver

drivers/usb/serial/io_ti.c | 14 ++++++++++++--
1 files changed, 12 insertions(+), 2 deletions(-)
------

ChangeSet@1.1094.6.11, 2003-03-14 11:58:58-08:00, elenstev@mesatop.com
  [PATCH] USB: spelling fixes for drivers/usb

  This spelling and typo cleanup patch was reviewed by Mike Hayes and
  Jared Daniel J. Smith.

ChangeSet@1.1094.6.10, 2003-03-14 11:10:11-08:00, green@linuxhacker.ru
[PATCH] USB: more Edgeport USB Serial Converter driver stuff

drivers/usb/serial/io_ti.c | 4 ++++
1 files changed, 4 insertions(+)
------

ChangeSet@1.1094.6.9, 2003-03-14 10:53:01-08:00, msdemlei@cl.uni-heidelberg.de
  [PATCH] USB: Patch for DSBR-100 driver

  I since you are listed as the maintainer of the USB subsystem and
  I can't really see who else applies, I'm sending you a patch to my
  driver for the DSBR-100 USB radio. This is mainly code cosmetics
  (fixed ugly missing spaces after commas I inherited from the
  aztech driver, some constants moved to preprocessor symbols), but
  there's one technical change: I used to stop the radio when my
  file descriptor was closed. Petr Slansky <slansky@usa.net>
  pointed out that the other radio drivers don't do that, so
  now I just let the radio run.

drivers/usb/media/dsbr100.c | 75 ++++++++++++++++++++++++--------------------
1 files changed, 41 insertions(+), 34 deletions(-)
------

ChangeSet@1.1094.6.8, 2003-03-14 10:43:24-08:00, green@linuxhacker.ru
  [PATCH] Memleak in KOBIL USB Smart Card Terminal Driver

     There is a memleak on error exit path in KOBIL USB Smart Card Terminal
     Driver in both current 2.4 and 2.5.
     See the patch.
     Found with help of smatch + enhanced unfree script.

drivers/usb/serial/kobil_sct.c | 2 ++
1 files changed, 2 insertions(+)
------

ChangeSet@1.1094.6.7, 2003-03-14 10:43:09-08:00, johannes@erdfelt.com
  [PATCH] uhci-hcd.c 2.5 finish completions in correct order

  Here's the 2.5 version of the patch to uhci.c to finish completions in
  the correct order.

drivers/usb/host/uhci-hcd.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
------

ChangeSet@1.1094.6.6, 2003-03-14 10:37:16-08:00, henning@meier-geinitz.de
  [PATCH] USB: Fix crash in read/write/ioctl in scanner driver

  Used kobject reference counting to free the scn struct when the device
  is closed and disconnected. Avoids crashes when writing to a
  disconnected device. (Thanks to Greg KH).

  I've also changed irq_scanner to avoid submitting new URBs when the
  old one returned with an error. Without this change irq_scanner gets
  called ever and ever again after a disconnect while open.

drivers/usb/image/scanner.c | 70 ++++++++++++++++++++++++++++++--------------
drivers/usb/image/scanner.h | 4 +-
2 files changed, 51 insertions(+), 23 deletions(-)
------

ChangeSet@1.1094.6.5, 2003-03-14 10:36:55-08:00, david-b@pacbell.net
  [PATCH] USB ohci: "registers" sysfs file

> This exhibits a build error when OHCI_VERBOSE_DEBUG is enabled:

  Odd, I guess the build I tested was when that was enabled
  without first enabling debugging. The fix is trivial.

drivers/usb/host/ohci-q.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
------

ChangeSet@1.1094.6.4, 2003-03-11 17:35:29-08:00, greg@kroah.com
  [PATCH] USB: Added support for the Sony Clie NZ90V device.

  Thanks to Martin Brachtl <brachtl@redgrep.cz> for the information.

drivers/usb/serial/visor.c | 7 +++++++
drivers/usb/serial/visor.h | 1 +
2 files changed, 8 insertions(+)
------

ChangeSet@1.1094.6.3, 2003-03-11 17:16:12-08:00, greg@kroah.com
  [PATCH] USB: fix up a comment in usb_unlink()

  Thanks to David for pointing this out.

drivers/usb/core/urb.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
------

ChangeSet@1.1094.6.2, 2003-03-11 17:13:26-08:00, baldrick@wanadoo.fr
  [PATCH] USB speedtouch: send path optimization

  Write multiple cells in one function call, rather than one cell per
  function call. Under maximum send load, this reduces cell writing
  CPU usage from 0.0095% to 0.0085% on my machine. A 10% improvement! :)

drivers/usb/misc/speedtouch.c | 68 +++++++++++++++++++++++++-----------------
1 files changed, 41 insertions(+), 27 deletions(-)
------

ChangeSet@1.1094.6.1, 2003-03-11 17:02:44-08:00, greg@kroah.com
  [PATCH] USB: added support for the palm M100

  Thanks to C Falconer <cf@avonside.school.nz> for the information.

Push file://home/greg/linux/BK/gregkh-2.5 -> file://home/greg/linux/BK/bleed-2.5
drivers/usb/serial/visor.c | 3 +++
drivers/usb/serial/visor.h | 1 +
2 files changed, 4 insertions(+)
------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Pete Zaitcev: "Re: Read Hat 7.3 and 8.0 compilation problems"
Previous message: Jamie Lokier: "Re: Linux-2.4.20 modem control"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Sun Mar 23 2003 - 22:00:21 EST