Interestingly, the initial ssh connection worked, the second one failed.
Subsequent attempts fail too.
This all over ipv6:
hubert# tcpdump -r file -v -v
29.09 snapcount.33408 > hubert.ssh: S [tcp sum ok] 2737328594:2737328594(0) win 5760 <mss 1440,sackOK,timestamp 10690463 0,nop,wscale 0> (len 40, hlim 64)
29.09 hubert.ssh > snapcount.33408: S [tcp sum ok] 2399386333:2399386333(0) ack 2737328595 win 5712 <mss 1440,sackOK,timestamp 10865690 10690463,nop,wscale 0> (len 40, hlim 64)
29.09 snapcount.33408 > hubert.ssh: . [tcp sum ok] 1:1(0) ack 1 win 5760 <nop,nop,timestamp 10690464 10865690> (len 32, hlim 64)
29.10 hubert.ssh > snapcount.33408: P [bad tcp cksum 4f2!] 1:41(40) ack 1 win 5712 <nop,nop,timestamp 10865695 10690464> (len 72, hlim 64)
29.30 hubert.ssh > snapcount.33408: P [bad tcp cksum 3bf1!] 1:41(40) ack 1 win 5712 <nop,nop,timestamp 10865896 10690464> (len 72, hlim 64)
29.83 hubert.ssh > snapcount.33408: P [bad tcp cksum 23ef!] 1:41(40) ack 1 win 5712 <nop,nop,timestamp 10866432 10690464> (len 72, hlim 64)
30.86 hubert.ssh > snapcount.33408: P [bad tcp cksum 23eb!] 1:41(40) ack 1 win 5712 <nop,nop,timestamp 10867456 10690464> (len 72, hlim 64)
Both hosts run 2.5.65. hubert.ipv6.ds9a.nl (publically routable, so you
can try to ssh to me as long as I'm not asleep, the machine is next to my
bed) is a pentium pro 200. Kernel was make mrpropered before compiling,
virgin kernel.
Capture attached.
Regards,
bert
-- http://www.PowerDNS.com Open source, database driven DNS Software http://lartc.org Linux Advanced Routing & Traffic Control HOWTO http://netherlabs.nl Consulting
This archive was generated by hypermail 2b29 : Sun Mar 23 2003 - 22:00:26 EST