ChangeSet 1.1143.1.8, 2003/03/19 11:29:45-08:00, elenstev@mesatop.com
[PATCH] i2c: spelling corrections for drivers/i2c
Here are some spelling and typo fixes for drivers/i2c.
drivers/i2c/chips/adm1021.c | 4 ++--
drivers/i2c/chips/lm75.c | 2 +-
drivers/i2c/i2c-algo-pcf.c | 6 +++---
drivers/i2c/i2c-proc.c | 2 +-
4 files changed, 7 insertions(+), 7 deletions(-)
diff -Nru a/drivers/i2c/chips/adm1021.c b/drivers/i2c/chips/adm1021.c
--- a/drivers/i2c/chips/adm1021.c Thu Mar 20 12:55:46 2003
+++ b/drivers/i2c/chips/adm1021.c Thu Mar 20 12:55:46 2003
@@ -93,9 +93,9 @@
/* Initial values */
-/* Note: Eventhough I left the low and high limits named os and hyst,
+/* Note: Even though I left the low and high limits named os and hyst,
they don't quite work like a thermostat the way the LM75 does. I.e.,
-a lower temp than THYST actuall triggers an alarm instead of
+a lower temp than THYST actually triggers an alarm instead of
clearing it. Weird, ey? --Phil */
#define adm1021_INIT_TOS 60
#define adm1021_INIT_THYST 20
diff -Nru a/drivers/i2c/chips/lm75.c b/drivers/i2c/chips/lm75.c
--- a/drivers/i2c/chips/lm75.c Thu Mar 20 12:55:46 2003
+++ b/drivers/i2c/chips/lm75.c Thu Mar 20 12:55:46 2003
@@ -25,7 +25,7 @@
#include <linux/i2c-proc.h>
-#define LM75_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
+#define LM75_SYSCTL_TEMP 1200 /* Degrees Celsius * 10 */
/* Addresses to scan */
static unsigned short normal_i2c[] = { SENSORS_I2C_END };
diff -Nru a/drivers/i2c/i2c-algo-pcf.c b/drivers/i2c/i2c-algo-pcf.c
--- a/drivers/i2c/i2c-algo-pcf.c Thu Mar 20 12:55:46 2003
+++ b/drivers/i2c/i2c-algo-pcf.c Thu Mar 20 12:55:46 2003
@@ -152,7 +152,7 @@
/* load own address in S0, effective address is (own << 1) */
i2c_outb(adap, get_own(adap));
- /* check it's realy writen */
+ /* check it's really written */
if ((temp = i2c_inb(adap)) != get_own(adap)) {
DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S0 (0x%02x).\n", temp));
return -ENXIO;
@@ -168,7 +168,7 @@
/* load clock register S2 */
i2c_outb(adap, get_clock(adap));
- /* check it's realy writen, the only 5 lowest bits does matter */
+ /* check it's really written, the only 5 lowest bits does matter */
if (((temp = i2c_inb(adap)) & 0x1f) != get_clock(adap)) {
DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S2 (0x%02x).\n", temp));
return -ENXIO;
@@ -177,7 +177,7 @@
/* Enable serial interface, idle, S0 selected */
set_pcf(adap, 1, I2C_PCF_IDLE);
- /* check to see PCF is realy idled and we can access status register */
+ /* check to see PCF is really idled and we can access status register */
if ((temp = get_pcf(adap, 1)) != (I2C_PCF_PIN | I2C_PCF_BB)) {
DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S1` (0x%02x).\n", temp));
return -ENXIO;
diff -Nru a/drivers/i2c/i2c-proc.c b/drivers/i2c/i2c-proc.c
--- a/drivers/i2c/i2c-proc.c Thu Mar 20 12:55:46 2003
+++ b/drivers/i2c/i2c-proc.c Thu Mar 20 12:55:46 2003
@@ -270,7 +270,7 @@
}
-/* This funcion reads or writes a 'real' value (encoded by the combination
+/* This function reads or writes a 'real' value (encoded by the combination
of an integer and a magnitude, the last is the power of ten the value
should be divided with) to a /proc/sys directory. To use this function,
you must (before registering the ctl_table) set the extra2 field to the
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Mar 23 2003 - 22:00:32 EST