This is the patch to support NEC PC-9800 subarchitecture
against 2.5.66-ac2. (5/9)
PC98 standard IDE I/F support.
- Change default IO port address and IRQ.
- Request region exactly for other optional cards.
- Get BIOS C/H/S parameter for PC98.
Regards,
Osamu Tomita
diff -Nru linux-2.5.66-ac2/drivers/ide/ide-disk.c linux98-2.5.66-ac2/drivers/ide/ide-disk.c
--- linux-2.5.66-ac2/drivers/ide/ide-disk.c 2003-04-05 10:06:18.000000000 +0900
+++ linux98-2.5.66-ac2/drivers/ide/ide-disk.c 2003-04-05 10:46:13.000000000 +0900
@@ -1591,6 +1591,71 @@
(void) probe_lba_addressing(drive, 1);
+#ifdef CONFIG_X86_PC9800
+ /* XXX - need more checks */
+ if (!drive->nobios && !drive->scsi && !drive->removable) {
+ /* PC-9800's BIOS do pack drive numbers to be continuous,
+ so extra work is needed here. */
+
+ /* drive information passed from boot/setup.S */
+ struct drive_info_struct {
+ u16 cyl;
+ u8 sect, head;
+ u16 ssize;
+ } __attribute__ ((packed));
+ extern struct drive_info_struct drive_info[];
+
+ /* this pointer must be advanced only when *DRIVE is
+ really hard disk. */
+ static struct drive_info_struct *info = drive_info;
+
+ if (info < &drive_info[4] && info->cyl) {
+ drive->cyl = drive->bios_cyl = info->cyl;
+ drive->head = drive->bios_head = info->head;
+ drive->sect = drive->bios_sect = info->sect;
+ ++info;
+ }
+ }
+
+ /* =PC98 MEMO=
+ physical capacity =< 65535*8*17 sect. : H/S=8/17 (fixed)
+ physical capacity > 65535*8*17 sect. : use physical geometry
+ (65535*8*17 = 8912760 sectors)
+ */
+ printk("%s: CHS: physical %d/%d/%d, logical %d/%d/%d, BIOS %d/%d/%d\n",
+ drive->name,
+ id->cyls, id->heads, id->sectors,
+ id->cur_cyls, id->cur_heads, id->cur_sectors,
+ drive->bios_cyl, drive->bios_head,drive->bios_sect);
+ if (!drive->cyl || !drive->head || !drive->sect) {
+ drive->cyl = drive->bios_cyl = id->cyls;
+ drive->head = drive->bios_head = id->heads;
+ drive->sect = drive->bios_sect = id->sectors;
+ printk("%s: not BIOS-supported device.\n",drive->name);
+ }
+ /* calculate drive capacity, and select LBA if possible */
+ init_idedisk_capacity(drive);
+
+ /*
+ * if possible, give fdisk access to more of the drive,
+ * by correcting bios_cyls:
+ */
+ capacity = idedisk_capacity(drive);
+ if (capacity < 8912760 &&
+ (drive->head != 8 || drive->sect != 17)) {
+ drive->head = drive->bios_head = 8;
+ drive->sect = drive->bios_sect = 17;
+ drive->cyl = drive->bios_cyl =
+ capacity / (drive->bios_head * drive->bios_sect);
+ printk("%s: Fixing Geometry :: CHS=%d/%d/%d to CHS=%d/%d/%d\n",
+ drive->name,
+ id->cur_cyls,id->cur_heads,id->cur_sectors,
+ drive->bios_cyl,drive->bios_head,drive->bios_sect);
+ id->cur_cyls = drive->bios_cyl;
+ id->cur_heads = drive->bios_head;
+ id->cur_sectors = drive->bios_sect;
+ }
+#else /* !CONFIG_X86_PC9800 */
/* Extract geometry if we did not already have one for the drive */
if (!drive->cyl || !drive->head || !drive->sect) {
drive->cyl = drive->bios_cyl = id->cyls;
@@ -1624,6 +1689,8 @@
if ((capacity >= (drive->bios_cyl * drive->bios_sect * drive->bios_head)) &&
(!drive->forced_geom) && drive->bios_sect && drive->bios_head)
drive->bios_cyl = (capacity / drive->bios_sect) / drive->bios_head;
+#endif /* CONFIG_X86_PC9800 */
+
printk (KERN_INFO "%s: %ld sectors", drive->name, capacity);
/* Give size in megabytes (MB), not mebibytes (MiB). */
diff -Nru linux-2.5.66-ac2/drivers/ide/ide-probe.c linux98-2.5.66-ac2/drivers/ide/ide-probe.c
--- linux-2.5.66-ac2/drivers/ide/ide-probe.c 2003-04-05 10:06:18.000000000 +0900
+++ linux98-2.5.66-ac2/drivers/ide/ide-probe.c 2003-04-05 10:46:13.000000000 +0900
@@ -669,7 +669,7 @@
if (hwif->mmio == 2)
return 0;
- addr_errs = hwif_check_region(hwif, hwif->io_ports[IDE_DATA_OFFSET], 1);
+ addr_errs = hwif_check_region(hwif, hwif->io_ports[IDE_DATA_OFFSET], pc98 ? 2 : 1);
for (i = IDE_ERROR_OFFSET; i <= IDE_STATUS_OFFSET; i++)
addr_errs += hwif_check_region(hwif, hwif->io_ports[i], 1);
if (hwif->io_ports[IDE_CONTROL_OFFSET])
@@ -718,7 +718,9 @@
}
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
- hwif_request_region(hwif->io_ports[i], 1, hwif->name);
+ hwif_request_region(hwif->io_ports[i],
+ (pc98 && i == IDE_DATA_OFFSET) ? 2 : 1,
+ hwif->name);
}
//EXPORT_SYMBOL(hwif_register);
@@ -806,6 +808,9 @@
#if CONFIG_BLK_DEV_PDC4030
(hwif->chipset != ide_pdc4030 || hwif->channel == 0) &&
#endif /* CONFIG_BLK_DEV_PDC4030 */
+#if CONFIG_BLK_DEV_IDE_PC9800
+ (hwif->chipset != ide_pc9800 || !hwif->mate->present) &&
+#endif
(hwif_check_regions(hwif))) {
u16 msgout = 0;
for (unit = 0; unit < MAX_DRIVES; ++unit) {
@@ -1166,7 +1171,7 @@
ide_init_drive(drive);
}
-#if !defined(__mc68000__) && !defined(CONFIG_APUS) && !defined(__sparc__)
+#if !defined(__mc68000__) && !defined(CONFIG_APUS) && !defined(__sparc__) && !defined(CONFIG_X86_PC9800)
printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET],
hwif->io_ports[IDE_DATA_OFFSET]+7,
@@ -1176,6 +1181,11 @@
hwif->io_ports[IDE_DATA_OFFSET],
hwif->io_ports[IDE_DATA_OFFSET]+7,
hwif->io_ports[IDE_CONTROL_OFFSET], __irq_itoa(hwif->irq));
+#elif defined(CONFIG_X86_PC9800)
+ printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
+ hwif->io_ports[IDE_DATA_OFFSET],
+ hwif->io_ports[IDE_DATA_OFFSET]+15,
+ hwif->io_ports[IDE_CONTROL_OFFSET], hwif->irq);
#else
printk("%s at %x on irq 0x%08x", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET], hwif->irq);
diff -Nru linux-2.5.66-ac2/drivers/ide/ide.c linux98-2.5.66-ac2/drivers/ide/ide.c
--- linux-2.5.66-ac2/drivers/ide/ide.c 2003-04-05 10:06:18.000000000 +0900
+++ linux98-2.5.66-ac2/drivers/ide/ide.c 2003-04-05 10:46:13.000000000 +0900
@@ -551,7 +551,8 @@
}
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
if (hwif->io_ports[i]) {
- hwif_release_region(hwif->io_ports[i], 1);
+ hwif_release_region(hwif->io_ports[i],
+ (pc98 && i == IDE_DATA_OFFSET) ? 2 : 1);
}
}
}
@@ -2129,6 +2130,12 @@
}
#endif /* CONFIG_BLK_DEV_IDEPCI */
+#ifdef CONFIG_BLK_DEV_IDE_PC9800
+ {
+ extern void ide_probe_for_pc9800(void);
+ ide_probe_for_pc9800();
+ }
+#endif
#ifdef CONFIG_ETRAX_IDE
{
extern void init_e100_ide(void);
diff -Nru linux/include/linux/hdreg.h linux98/include/linux/hdreg.h
--- linux/include/linux/hdreg.h 2003-02-15 08:51:42.000000000 +0900
+++ linux98/include/linux/hdreg.h 2003-02-20 10:18:37.000000000 +0900
@@ -5,11 +5,29 @@
* This file contains some defines for the AT-hd-controller.
* Various sources.
*/
+#include <linux/config.h>
/* ide.c has its own port definitions in "ide.h" */
#define HD_IRQ 14
+#ifdef CONFIG_X86_PC9800
+/* Hd controller regs. for NEC PC-9800 */
+#define HD_DATA 0x640 /* _CTL when writing */
+#define HD_ERROR 0x642 /* see err-bits */
+#define HD_NSECTOR 0x644 /* nr of sectors to read/write */
+#define HD_SECTOR 0x646 /* starting sector */
+#define HD_LCYL 0x648 /* starting cylinder */
+#define HD_HCYL 0x64a /* high byte of starting cyl */
+#define HD_CURRENT 0x64c /* 101dhhhh , d=drive, hhhh=head */
+#define HD_STATUS 0x64e /* see status-bits */
+#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */
+#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */
+#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */
+
+#define HD_CMD 0x74c /* used for resets */
+#define HD_ALTSTATUS 0x74c /* same as HD_STATUS but doesn't clear irq */
+#else /* !CONFIG_X86_PC9800 */
/* Hd controller regs. Ref: IBM AT Bios-listing */
#define HD_DATA 0x1f0 /* _CTL when writing */
#define HD_ERROR 0x1f1 /* see err-bits */
@@ -25,6 +43,7 @@
#define HD_CMD 0x3f6 /* used for resets */
#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */
+#endif /* CONFIG_X86_PC9800 */
/* remainder is shared between hd.c, ide.c, ide-cd.c, and the hdparm utility */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Apr 07 2003 - 22:00:29 EST