On Mer, 2003-04-16 at 17:15, Pau Aliagas wrote:
> I'm having serious trouble dealing with:
> * 80Gb Seagate Barracuda disc (Model Number ST380011A, Firmware Revision 3.04)
> * on an Intel 82801AA IDE controller
Thats a known to work configuration, so that is strange. Is the drive
known good and the driver/controller setup ok in "other OS" if you also
run it ?
> (RH-8.0 updated kernels) unless I boot with ide=nodma.
> With RH kernels it stalls reading the partition table.
> With 2.4.21-pre7 I get and error of the dma.
Same error in both cases, just its recovered properly in the newer code.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 23 2003 - 22:00:19 EST