We also parse modem control signals in the tty layer, and fail with
EINVAL if the driver does not provide the methods. All tty drivers
which require modem control support should be updated to provide
the new tiocmset and tiocmget methods.
** Note: there is some janitorial work which needs done to convert
the other serial drivers to use this TIOCM code - it should be
a nice project for some of the janitors.
diff -Nru a/drivers/char/tty_io.c b/drivers/char/tty_io.c
--- a/drivers/char/tty_io.c Wed Apr 16 23:40:27 2003
+++ b/drivers/char/tty_io.c Wed Apr 16 23:40:27 2003
@@ -1691,6 +1691,55 @@
return 0;
}
+static int
+tty_tiocmget(struct tty_struct *tty, struct file *file, unsigned long arg)
+{
+ int retval = -EINVAL;
+
+ if (tty->driver.tiocmget) {
+ retval = tty->driver.tiocmget(tty, file);
+
+ if (retval >= 0)
+ retval = put_user(retval, (int *)arg);
+ }
+ return retval;
+}
+
+static int
+tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int retval = -EINVAL;
+
+ if (tty->driver.tiocmset) {
+ unsigned int set, clear, val;
+
+ retval = get_user(val, (unsigned int *)arg);
+ if (retval)
+ return retval;
+
+ set = clear = 0;
+ switch (cmd) {
+ case TIOCMBIS:
+ set = val;
+ break;
+ case TIOCMBIC:
+ clear = val;
+ break;
+ case TIOCMSET:
+ set = val;
+ clear = ~val;
+ break;
+ }
+
+ set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2;
+ clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2;
+
+ retval = tty->driver.tiocmset(tty, file, set, clear);
+ }
+ return retval;
+}
+
/*
* Split this up, as gcc can choke on it otherwise..
*/
@@ -1816,6 +1865,14 @@
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
return send_break(tty, arg ? arg*(HZ/10) : HZ/4);
+
+ case TIOCMGET:
+ return tty_tiocmget(tty, file, arg);
+
+ case TIOCMSET:
+ case TIOCMBIC:
+ case TIOCMBIS:
+ return tty_tiocmset(tty, file, cmd, arg);
}
if (tty->driver.ioctl) {
int retval = (tty->driver.ioctl)(tty, file, cmd, arg);
diff -Nru a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
--- a/drivers/net/irda/irtty-sir.c Wed Apr 16 23:40:27 2003
+++ b/drivers/net/irda/irtty-sir.c Wed Apr 16 23:40:27 2003
@@ -180,32 +180,29 @@
static int irtty_set_dtr_rts(struct sir_dev *dev, int dtr, int rts)
{
struct sirtty_cb *priv = dev->priv;
- int arg = 0;
+ int set = 0;
+ int clear = 0;
ASSERT(priv != NULL, return -1;);
ASSERT(priv->magic == IRTTY_MAGIC, return -1;);
-#ifdef TIOCM_OUT2 /* Not defined for ARM */
- arg = TIOCM_OUT2;
-#endif
if (rts)
- arg |= TIOCM_RTS;
+ set |= TIOCM_RTS;
+ else
+ clear |= TIOCM_RTS;
if (dtr)
- arg |= TIOCM_DTR;
+ set |= TIOCM_DTR;
+ else
+ clear |= TIOCM_DTR;
/*
- * The ioctl() function, or actually set_modem_info() in serial.c
- * expects a pointer to the argument in user space. This is working
- * here because we are always called from the kIrDAd thread which
- * has set_fs(KERNEL_DS) permanently set. Therefore copy_from_user()
- * is happy with our arg-parameter being local here in kernel space.
+ * We can't use ioctl() because it expects a non-null file structure,
+ * and we don't have that here.
+ * This function is not yet defined for all tty driver, so
+ * let's be careful... Jean II
*/
-
- lock_kernel();
- if (priv->tty->driver.ioctl(priv->tty, NULL, TIOCMSET, (unsigned long) &arg)) {
- IRDA_DEBUG(2, "%s(), error doing ioctl!\n", __FUNCTION__);
- }
- unlock_kernel();
+ ASSERT(priv->tty->driver.tiocmset != NULL, return -1;);
+ priv->tty->driver.tiocmset(priv->tty, NULL, set, clear);
return 0;
}
diff -Nru a/drivers/serial/core.c b/drivers/serial/core.c
--- a/drivers/serial/core.c Wed Apr 16 23:40:27 2003
+++ b/drivers/serial/core.c Wed Apr 16 23:40:27 2003
@@ -873,45 +873,38 @@
return put_user(result, value);
}
-static int uart_get_modem_info(struct uart_port *port, unsigned int *value)
+static int uart_tiocmget(struct tty_struct *tty, struct file *file)
{
- unsigned int result = port->mctrl;
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+ int result = -EIO;
- result |= port->ops->get_mctrl(port);
+ down(&state->sem);
+ if ((!file || !tty_hung_up_p(file)) &&
+ !(tty->flags & (1 << TTY_IO_ERROR))) {
+ result = port->mctrl;
+ result |= port->ops->get_mctrl(port);
+ }
+ up(&state->sem);
- return put_user(result, value);
+ return result;
}
static int
-uart_set_modem_info(struct uart_port *port, unsigned int cmd,
- unsigned int *value)
+uart_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
{
- unsigned int arg, set, clear;
- int ret = 0;
-
- if (get_user(arg, value))
- return -EFAULT;
-
- arg &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2;
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+ int ret = -EIO;
- set = clear = 0;
- switch (cmd) {
- case TIOCMBIS:
- set = arg;
- break;
- case TIOCMBIC:
- clear = arg;
- break;
- case TIOCMSET:
- set = arg;
- clear = ~arg;
- break;
- default:
- ret = -EINVAL;
- break;
- }
- if (ret == 0)
+ down(&state->sem);
+ if ((!file || !tty_hung_up_p(file)) &&
+ !(tty->flags & (1 << TTY_IO_ERROR))) {
uart_update_mctrl(port, set, clear);
+ ret = 0;
+ }
+ up(&state->sem);
return ret;
}
@@ -922,8 +915,12 @@
BUG_ON(!kernel_locked());
+ down(&state->sem);
+
if (port->type != PORT_UNKNOWN)
port->ops->break_ctl(port, break_state);
+
+ up(&state->sem);
}
static int uart_do_autoconfig(struct uart_state *state)
@@ -1130,17 +1127,6 @@
* protected against the tty being hung up.
*/
switch (cmd) {
- case TIOCMGET:
- ret = uart_get_modem_info(state->port, (unsigned int *)arg);
- break;
-
- case TIOCMBIS:
- case TIOCMBIC:
- case TIOCMSET:
- ret = uart_set_modem_info(state->port, cmd,
- (unsigned int *)arg);
- break;
-
case TIOCSERGETLSR: /* Get line status register */
ret = uart_get_lsr_info(state, (unsigned int *)arg);
break;
@@ -2162,6 +2148,8 @@
#ifdef CONFIG_PROC_FS
normal->read_proc = uart_read_proc;
#endif
+ normal->tiocmget = uart_tiocmget;
+ normal->tiocmset = uart_tiocmset;
/*
* Initialise the UART state(s).
diff -Nru a/include/linux/tty_driver.h b/include/linux/tty_driver.h
--- a/include/linux/tty_driver.h Wed Apr 16 23:40:27 2003
+++ b/include/linux/tty_driver.h Wed Apr 16 23:40:27 2003
@@ -172,6 +172,9 @@
int count, int *eof, void *data);
int (*write_proc)(struct file *file, const char *buffer,
unsigned long count, void *data);
+ int (*tiocmget)(struct tty_struct *tty, struct file *file);
+ int (*tiocmset)(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear);
struct list_head tty_drivers;
};
--
Russell King (rmk@arm.linux.org.uk) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 23 2003 - 22:00:20 EST