ChangeSet 1.1179.3.4, 2003/04/23 11:33:48-07:00, hch@lst.de
[PATCH] i2c: bring i2c-viapro uptodate with the style guide
drivers/i2c/busses/i2c-viapro.c | 321 ++++++++++++++++++----------------------
1 files changed, 149 insertions(+), 172 deletions(-)
diff -Nru a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
--- a/drivers/i2c/busses/i2c-viapro.c Thu Apr 24 16:47:16 2003
+++ b/drivers/i2c/busses/i2c-viapro.c Thu Apr 24 16:47:16 2003
@@ -42,23 +42,24 @@
#include <linux/init.h>
#include <asm/io.h>
-#define SMBBA1 0x90
-#define SMBBA2 0x80
-#define SMBBA3 0xD0
+#define SMBBA1 0x90
+#define SMBBA2 0x80
+#define SMBBA3 0xD0
/* SMBus address offsets */
-#define SMBHSTSTS (0 + vt596_smba)
-#define SMBHSLVSTS (1 + vt596_smba)
-#define SMBHSTCNT (2 + vt596_smba)
-#define SMBHSTCMD (3 + vt596_smba)
-#define SMBHSTADD (4 + vt596_smba)
-#define SMBHSTDAT0 (5 + vt596_smba)
-#define SMBHSTDAT1 (6 + vt596_smba)
-#define SMBBLKDAT (7 + vt596_smba)
-#define SMBSLVCNT (8 + vt596_smba)
-#define SMBSHDWCMD (9 + vt596_smba)
-#define SMBSLVEVT (0xA + vt596_smba)
-#define SMBSLVDAT (0xC + vt596_smba)
+static unsigned short vt596_smba;
+#define SMBHSTSTS (vt596_smba + 0)
+#define SMBHSLVSTS (vt596_smba + 1)
+#define SMBHSTCNT (vt596_smba + 2)
+#define SMBHSTCMD (vt596_smba + 3)
+#define SMBHSTADD (vt596_smba + 4)
+#define SMBHSTDAT0 (vt596_smba + 5)
+#define SMBHSTDAT1 (vt596_smba + 6)
+#define SMBBLKDAT (vt596_smba + 7)
+#define SMBSLVCNT (vt596_smba + 8)
+#define SMBSHDWCMD (vt596_smba + 9)
+#define SMBSLVEVT (vt596_smba + 0xA)
+#define SMBSLVDAT (vt596_smba + 0xC)
/* PCI Address Constants */
@@ -68,14 +69,14 @@
static unsigned short smb_cf_hstcfg = 0xD2;
#define SMBHSTCFG (smb_cf_hstcfg)
-#define SMBSLVC (SMBHSTCFG+1)
-#define SMBSHDW1 (SMBHSTCFG+2)
-#define SMBSHDW2 (SMBHSTCFG+3)
-#define SMBREV (SMBHSTCFG+4)
+#define SMBSLVC (smb_cf_hstcfg + 1)
+#define SMBSHDW1 (smb_cf_hstcfg + 2)
+#define SMBSHDW2 (smb_cf_hstcfg + 3)
+#define SMBREV (smb_cf_hstcfg + 4)
/* Other settings */
-#define MAX_TIMEOUT 500
-#define ENABLE_INT9 0
+#define MAX_TIMEOUT 500
+#define ENABLE_INT9 0
/* VT82C596 constants */
#define VT596_QUICK 0x00
@@ -84,144 +85,33 @@
#define VT596_WORD_DATA 0x0C
#define VT596_BLOCK_DATA 0x14
-/* insmod parameters */
/* If force is set to anything different from 0, we forcibly enable the
VT596. DANGEROUS! */
-static int force = 0;
+static int force;
MODULE_PARM(force, "i");
MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!");
/* If force_addr is set to anything different from 0, we forcibly enable
the VT596 at the given address. VERY DANGEROUS! */
-static int force_addr = 0;
+static int force_addr;
MODULE_PARM(force_addr, "i");
MODULE_PARM_DESC(force_addr,
"Forcibly enable the SMBus at the given address. "
"EXTREMELY DANGEROUS!");
-static void vt596_do_pause(unsigned int amount);
-static int vt596_transaction(void);
-s32 vt596_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
- char read_write, u8 command, int size, union i2c_smbus_data * data);
-u32 vt596_func(struct i2c_adapter *adapter);
-
-static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
- .smbus_xfer = vt596_access,
- .functionality = vt596_func,
-};
-
-static struct i2c_adapter vt596_adapter = {
- .owner = THIS_MODULE,
- .id = I2C_ALGO_SMBUS | I2C_HW_SMBUS_VIA2,
- .algo = &smbus_algorithm,
- .dev = {
- .name = "unset",
- },
-};
-
-
-
-
-static unsigned short vt596_smba = 0;
-
-
-/* Detect whether a compatible device can be found, and initialize it. */
-int vt596_setup(struct pci_dev *VT596_dev, struct pci_device_id const *id)
-{
- unsigned char temp;
-
- dev_info(&VT596_dev->dev, "Found Via %s device\n", VT596_dev->dev.name);
-
- /* Determine the address of the SMBus areas */
- if (force_addr) {
- vt596_smba = force_addr & 0xfff0;
- force = 0;
- } else {
- if ((pci_read_config_word(VT596_dev, id->driver_data, &vt596_smba))
- || !(vt596_smba & 0x1)) {
- /* try 2nd address and config reg. for 596 */
- if((id->device == PCI_DEVICE_ID_VIA_82C596_3) &&
- (!pci_read_config_word(VT596_dev, SMBBA2, &vt596_smba)) &&
- (vt596_smba & 0x1)) {
- smb_cf_hstcfg = 0x84;
- } else {
- /* no matches at all */
- dev_err(&VT596_dev->dev, "Cannot configure "
- "SMBus I/O Base address\n");
- return(-ENODEV);
- }
- }
- vt596_smba &= 0xfff0;
- if(vt596_smba == 0) {
- dev_err(&VT596_dev->dev, "SMBus base address "
- "uninitialized - upgrade BIOS or use "
- "force_addr=0xaddr\n");
- return -ENODEV;
- }
- }
-
- if (!request_region(vt596_smba, 8, "viapro-smbus")) {
- dev_err(&VT596_dev->dev, "SMBus region 0x%x already in use!\n",
- vt596_smba);
- return(-ENODEV);
- }
-
- pci_read_config_byte(VT596_dev, SMBHSTCFG, &temp);
- /* If force_addr is set, we program the new address here. Just to make
- sure, we disable the VT596 first. */
- if (force_addr) {
- pci_write_config_byte(VT596_dev, SMBHSTCFG, temp & 0xfe);
- pci_write_config_word(VT596_dev, id->driver_data, vt596_smba);
- pci_write_config_byte(VT596_dev, SMBHSTCFG, temp | 0x01);
- dev_warn(&VT596_dev->dev, "WARNING: SMBus interface set to new "
- "address 0x%04x!\n", vt596_smba);
- } else if ((temp & 1) == 0) {
- if (force) {
- /* NOTE: This assumes I/O space and other allocations
- * WERE done by the Bios! Don't complain if your
- * hardware does weird things after enabling this.
- * :') Check for Bios updates before resorting to
- * this.
- */
- pci_write_config_byte(VT596_dev, SMBHSTCFG,
- temp | 1);
- dev_info(&VT596_dev->dev, "Enabling SMBus device\n");
- } else {
- dev_err(&VT596_dev->dev, "SMBUS: Error: Host SMBus "
- "controller not enabled! - upgrade BIOS or "
- "use force=1\n");
- return(-ENODEV);
- }
- }
-
- if ((temp & 0x0E) == 8)
- dev_dbg(&VT596_dev->dev, "using Interrupt 9 for SMBus.\n");
- else if ((temp & 0x0E) == 0)
- dev_dbg(&VT596_dev->dev, "using Interrupt SMI# for SMBus.\n");
- else
- dev_dbg(&VT596_dev->dev, "Illegal Interrupt configuration "
- "(or code out of date)!\n");
-
- pci_read_config_byte(VT596_dev, SMBREV, &temp);
- dev_dbg(&VT596_dev->dev, "SMBREV = 0x%X\n", temp);
- dev_dbg(&VT596_dev->dev, "VT596_smba = 0x%X\n", vt596_smba);
-
- return(0);
-}
+static struct i2c_adapter vt596_adapter;
/* Internally used pause function */
-void vt596_do_pause(unsigned int amount)
+static void vt596_do_pause(unsigned int amount)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(amount);
}
/* Another internally used function */
-int vt596_transaction(void)
+static int vt596_transaction(void)
{
int temp;
int result = 0;
@@ -296,15 +186,16 @@
}
/* Return -1 on error. */
-s32 vt596_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
- char read_write, u8 command, int size,
- union i2c_smbus_data * data)
+static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
{
int i, len;
switch (size) {
case I2C_SMBUS_PROC_CALL:
- dev_info(&vt596_adapter.dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+ dev_info(&vt596_adapter.dev,
+ "I2C_SMBUS_PROC_CALL not supported!\n");
return -1;
case I2C_SMBUS_QUICK:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
@@ -363,7 +254,6 @@
if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
return 0;
-
switch (size) {
case VT596_BYTE:
/* Where is the result put? I assume here it is in
@@ -388,15 +278,127 @@
return 0;
}
-
-u32 vt596_func(struct i2c_adapter *adapter)
+static u32 vt596_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA;
}
+static struct i2c_algorithm smbus_algorithm = {
+ .name = "Non-I2C SMBus adapter",
+ .id = I2C_ALGO_SMBUS,
+ .smbus_xfer = vt596_access,
+ .functionality = vt596_func,
+};
+
+static struct i2c_adapter vt596_adapter = {
+ .owner = THIS_MODULE,
+ .id = I2C_ALGO_SMBUS | I2C_HW_SMBUS_VIA2,
+ .algo = &smbus_algorithm,
+ .dev = {
+ .name = "unset",
+ },
+};
+
+static int __devinit vt596_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ unsigned char temp;
+ int error = -ENODEV;
+
+ /* Determine the address of the SMBus areas */
+ if (force_addr) {
+ vt596_smba = force_addr & 0xfff0;
+ force = 0;
+ goto found;
+ }
+
+ if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
+ !(vt596_smba & 0x1)) {
+ /* try 2nd address and config reg. for 596 */
+ if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
+ !pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
+ (vt596_smba & 0x1)) {
+ smb_cf_hstcfg = 0x84;
+ } else {
+ /* no matches at all */
+ dev_err(&pdev->dev, "Cannot configure "
+ "SMBus I/O Base address\n");
+ return -ENODEV;
+ }
+ }
+ vt596_smba &= 0xfff0;
+ if (vt596_smba == 0) {
+ dev_err(&pdev->dev, "SMBus base address "
+ "uninitialized - upgrade BIOS or use "
+ "force_addr=0xaddr\n");
+ return -ENODEV;
+ }
+
+ found:
+ if (!request_region(vt596_smba, 8, "viapro-smbus")) {
+ dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
+ vt596_smba);
+ return -ENODEV;
+ }
+
+ pci_read_config_byte(pdev, SMBHSTCFG, &temp);
+ /* If force_addr is set, we program the new address here. Just to make
+ sure, we disable the VT596 first. */
+ if (force_addr) {
+ pci_write_config_byte(pdev, SMBHSTCFG, temp & 0xfe);
+ pci_write_config_word(pdev, id->driver_data, vt596_smba);
+ pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
+ dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
+ "address 0x%04x!\n", vt596_smba);
+ } else if ((temp & 1) == 0) {
+ if (force) {
+ /* NOTE: This assumes I/O space and other allocations
+ * WERE done by the Bios! Don't complain if your
+ * hardware does weird things after enabling this.
+ * :') Check for Bios updates before resorting to
+ * this.
+ */
+ pci_write_config_byte(pdev, SMBHSTCFG, temp | 1);
+ dev_info(&pdev->dev, "Enabling SMBus device\n");
+ } else {
+ dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
+ "controller not enabled! - upgrade BIOS or "
+ "use force=1\n");
+ goto release_region;
+ }
+ }
+
+ if ((temp & 0x0E) == 8)
+ dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n");
+ else if ((temp & 0x0E) == 0)
+ dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n");
+ else
+ dev_dbg(&pdev->dev, "Illegal Interrupt configuration "
+ "(or code out of date)!\n");
+
+ pci_read_config_byte(pdev, SMBREV, &temp);
+ dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
+ dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
+
+ vt596_adapter.dev.parent = &pdev->dev;
+ snprintf(vt596_adapter.dev.name, DEVICE_NAME_SIZE,
+ "SMBus Via Pro adapter at %04x", vt596_smba);
+
+ return i2c_add_adapter(&vt596_adapter);
+
+ release_region:
+ release_region(vt596_smba, 8);
+ return error;
+}
+
+static void __devexit vt596_remove(struct pci_dev *pdev)
+{
+ i2c_del_adapter(&vt596_adapter);
+ release_region(vt596_smba, 8);
+}
static struct pci_device_id vt596_ids[] __devinitdata = {
{
@@ -451,29 +453,6 @@
{ 0, }
};
-static int __devinit vt596_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- int retval;
-
- retval = vt596_setup(dev, id);
- if (retval)
- return retval;
-
- vt596_adapter.dev.parent = &dev->dev;
-
- snprintf(vt596_adapter.dev.name, DEVICE_NAME_SIZE,
- "SMBus Via Pro adapter at %04x", vt596_smba);
-
- retval = i2c_add_adapter(&vt596_adapter);
-
- return retval;
-}
-
-static void __devexit vt596_remove(struct pci_dev *dev)
-{
- i2c_del_adapter(&vt596_adapter);
-}
-
static struct pci_driver vt596_driver = {
.name = "vt596 smbus",
.id_table = vt596_ids,
@@ -490,14 +469,12 @@
static void __exit i2c_vt596_exit(void)
{
pci_unregister_driver(&vt596_driver);
- release_region(vt596_smba, 8);
}
-
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR(
+ "Frodo Looijaard <frodol@dds.nl> and "
+ "Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("vt82c596 SMBus driver");
-
MODULE_LICENSE("GPL");
module_init(i2c_vt596_init);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 30 2003 - 22:00:19 EST