On Thu, May 08 2003, Bartlomiej Zolnierkiewicz wrote:
>
> On Thu, 8 May 2003, Jens Axboe wrote:
>
> > On Thu, May 08 2003, Bartlomiej Zolnierkiewicz wrote:
> > >
> > > On Thu, 8 May 2003, Jens Axboe wrote:
> > > > On Wed, May 07 2003, Jens Axboe wrote:
> > > > > > Jens you your patch sets hwif->rqsize to 65535 in setup-pci.c for all
> > > > > > PCI hwifs which is simply wrong as not all of them supports LBA48.
> > > > > > You should check for hwif->addressing and if true set rqsize to 65536
> > > > > > (not 65535) and not in IDE PCI code but in ide_init_queue() in ide-probe.c.
> > > > >
> > > > > Yes you are right, that would be the best way of doing it. As it happens
> > > > > for that patch, it does not hurt or break anything. But it is certainly
> > > > > cleaner, I'll fix that up.
> > > >
> > > > That part is added, I still kept it at 65535 though akin to how we don't
> > > > use that last sector in 28-bit commands either. For 48-bit commands this
> > >
> > > No, ide_init_queue() sets it to 256, so I want 65536 too.
> >
> > Alright, I don't care enough about that 1 sector to argue.
> >
> > > Note that it should be done after setting queue max sectors to 256,
> > > because not only ide-disk depends on this code:
> > >
> > > max_sectors = 256;
> > >
> > > (...)
> > >
> > > /*
> > > * Added "< max_sectors" check for safety if it will
> > > * be called again later with rq->size = 65536.
> > > * I don't believe it ever is.
> > > */
> > > if (hwif->rqsize < max_sectors)
> > > max_sectors = hwif->rqsize;
> > > blk_queue_max_sectors(q, max_sectors);
> > > if (!hwif->rqsize)
> > > hwif->rqsize = hwif->addressing ? 65536 : 256;
> >
> > You have the logic reversed here, the hwif and drive addressing are
> > reversed. Yeah, it's convoluted, dunno who thought that logic up...
>
> Not me.
> Logic is to prevent some bugs and actually my comment "I don't believe it
> ever is." is totally wrong.
>
> ide_init_queue() is called for all drives on hwif.
>
> ie. failure scenario:
> 1st drive 48-bit: !rqsize -> max_sectors = 256, rqsize = 65536
> 2nd drive 28-bit: rqsize -> max_sectors = 65536 -> doh!
>
> so "< max_sectors" is really needed.
>
> It can look a bit saner:
>
> if (!hwif->rqsize)
> hwif->rqsize = hwif->addressing ? 65536 : 256;
> if (hwif->rqsize < max_sectors)
> max_sectors = hwif->rqsize;
> blk_queue_max_sectors(q, max_sectors);
Ugh yeah, that stinks. Your changed version looks better.
> Looks good.
> Now test/review it for some time, we don't want any bugs to slip in.
> :-)
I'll give it a test spin.
-- Jens Axboe- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu May 15 2003 - 22:00:27 EST