-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Andrew Morton <akpm@digeo.com> writes:
> Alexander Hoogerhuis <alexh@ihatent.com> wrote:
> >
> > kernel/built-in.o(.text+0x1005): In function `schedule':
> > : undefined reference to `active_load_balance'
>
> I don't quite see how that can happen. Tried a `make clean'?
Quoth Dr. Frankesteen: "It's alive!". Helge's oneliner in shced.h did
the trick. After patching in a custom DSDT, this is my leftover list
of things that go boom on recent kernels:
* During shutdown, whilst stopping hotplug and unloading usb hub
drivers, machine freezes hard. Last printout is something along
these lines:
"usb-ohci 02:0e.2, address 3", or some such.
Then the machine becomes a doorstop.
* Synaptics touchpad driver as of 2.5.69 does not recognise the "tap
to click" functionality, and doesn't seem parse it's boot param to
enable it, I get it to work by hardcoding the PARM-line in
driver/input/mouse/psmouse.c to a "1". This might very well boil
down to user error (PEBKAC) on the boot time parm, but the auto
detection that worked up to .69 is b0rken.
* Insertion of my Palm cradle in the USB ports will result in this one
once the cradle tries to go active (this one is from -mm2, present
in -mm3 too):
Unable to handle kernel paging request at virtual address 8d3274f0
printing eip:
f0a1c6ba
*pde = 00000000
Oops: 0002 [#1]
CPU: 0
EIP: 0060:[<f0a1c6ba>] Tainted: PF VLI
EFLAGS: 00010203
EIP is at usb_serial_probe+0x5e/0xdfd [usbserial]
eax: 064b1129 ebx: f0a21714 ecx: f0a21598 edx: ebac4400
esi: 00000000 edi: 00000000 ebp: dd9e9eb8 esp: dd9e9e00
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 6353, threadinfo=dd9e8000 task=da240710)
Stack: efe92b64 dd9e9e20 00000246 c029761b 00000246 fffffff4 ed796980 ed562a80
dd9e9e58 00000000 00000000 00000000 00000000 ed7969ec 000041ed 00000000
dd9e9e5c ebac4400 edf85500 000000d0 ed7969ec 000041ed 00000000 dd9e9e6c
Call Trace:
[<c01662e9>] d_instantiate+0x67/0x7b
[<c0183a53>] sysfs_create+0x64/0x7e
[<c01842d7>] sysfs_create_dir+0xa8/0xd6
[<f0a21598>] usb_serial_driver+0x78/0x88 [usbserial]
[<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
[<f0a21520>] usb_serial_driver+0x0/0x88 [usbserial]
[<f088009a>] usb_device_probe+0x8c/0xac [usbcore]
[<f0a214e0>] +0x0/0x40 [usbserial]
[<f0a214e0>] +0x0/0x40 [usbserial]
[<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
[<c01ef5a9>] bus_match+0x43/0x6e
[<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
[<f0899298>] usb_bus_type+0x98/0xe0 [usbcore]
[<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
[<c01ef6ab>] driver_attach+0x5c/0x60
[<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
[<f0899244>] usb_bus_type+0x44/0xe0 [usbcore]
[<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
[<c01ef979>] bus_add_driver+0xb1/0xc6
[<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
[<f0899200>] usb_bus_type+0x0/0xe0 [usbcore]
[<f0a21520>] usb_serial_driver+0x0/0x88 [usbserial]
[<f0a21900>] +0x0/0x200 [usbserial]
[<c01efd97>] driver_register+0x31/0x35
[<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
[<f0a215c4>] usb_serial_tty_driver+0x4/0x120 [usbserial]
[<c01dd77e>] tty_register_driver+0x17d/0x289
[<f08801b7>] usb_register+0x6b/0xa6 [usbcore]
[<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
[<f0a1d534>] usb_serial_register+0x4e/0xa0 [usbserial]
[<f0a1ef60>] +0x5e0/0x998 [usbserial]
[<f08330f3>] +0xf3/0x13f [usbserial]
[<f0a21520>] usb_serial_driver+0x0/0x88 [usbserial]
[<c0131624>] sys_init_module+0x133/0x209
[<f0a21900>] +0x0/0x200 [usbserial]
[<c010ae57>] syscall_call+0x7/0xb
Code: 00 00 00 c7 45 84 00 00 00 00 c7 85 78 ff ff ff 00 00 00 00 89 55 8c c7 85 74 ff ff ff 00 00 00 00 8b 03 0f 18 00 15 81 fb a8 15 <a2> f0 74 32 8d 4b ec 89 4d 84 8b 41 0c 89 44 24 04 8b 45 08 89
<6>usb 2-1: USB disconnect, address 3
* On -mm3 under some loads mplayer can get very erratic, and after
playing a videostream for about 10-15 mins it gets progressivly more
prone to stalling. Moving the mousepointer into the window, and wiggling
it a bit restores it for a while.
mvh,
A
- --
Alexander Hoogerhuis | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE | +47 908 21 485
"You have zero privacy anyway. Get over it." --Scott McNealy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>
iD8DBQE+wVV4CQ1pa+gRoggRAsE/AJ9Zx3MXrgbQwtsXer+4aBK7RbE9cQCePe/S
ywXMXOVr8cvgOdN2eknAJnk=
=CyEy
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu May 15 2003 - 22:00:47 EST