On Tue, 2003-06-03 at 21:43, Philip Pokorny wrote:
> Martin Schlemmer wrote:
> > On Mon, 2003-06-02 at 19:20, Greg KH wrote:
> >
> > Hiya Greg
> >
> > While sorda on the topic ... since I did the w83781d driver some time
> > ago, I changed boards for a P4C800 (Intel 875 chipset), that have a
> > ICH5 southbridge, and not a ICH4 one .... I tried to add the ID's
> > to the i810 driver, and although it does load (even without the
> > ID's added), the I2C bus/sensor does not show in /sys. The w83781d
> > driver also load fine btw.
>
> My system (SuperMicro) with an '875 and ICH5 reports the ICH5 as an
> '801EB' which means you should be using the i2c-i801 driver not i2c-i810...
>
Right ... at work, so could not verify.
> I'm also betting that you need to set 'isich4' to true in the case of
> the ich5 as well...
>
> Try the attached patch... NOTE: I have *not* consulted the Intel DOC's
> on the ICH4 and ICH5 to see if the register interface has changed in
> other interesting ways...
>
Will let you know, thanks.
Regards,
-- Martin Schlemmer- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jun 07 2003 - 22:00:22 EST