Re: xircom card bus with 2.4.20 link trouble

From: Mike Dresser (mdresser_l@windsormachine.com)
Date: Fri Jun 20 2003 - 09:35:22 EST


On 20 Jun 2003, Arnaud Ligot wrote:

> > I haven't tried a 2.5.x kernel, nor a 2.4.21(it's on my list of things to
> > do)
> the card works with 2.4.20 nice and works if you set an ip address with
> the 2.4.21

Going to move to 2.4.21 in a few minutes(just booting up the laptop so i
can copy the vmlinuz image over to it)

> I have a CEM56-100
>

> I use the xirc2ps_cs module. I haven't force cardmgr to use so I think
> it's the good module for the card

If it's a CEM56-100, that's not a cardbus card!

That's the regular pcmcia version. That would explain why your xirc2ps_cs
is working. You have the same card as I do, with a differing model name.
Never did figure out what's different between the REM and CEM.

Mike

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Jun 23 2003 - 22:00:32 EST