--- Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
wrote: >
> Please send dmesg with oops
> (make sure you have CONFIG_KALLSYMS enabled).
>
just updated to 2.6-test1 with the same result
I attach the output on the screen (written down and copied, so may be
errors)
this occurs after loading ide1
> --
> Bartlomiej
>
> On Mon, 14 Jul 2003, [iso-8859-1] Mike Martin wrote:
>
> > I am getting a kernel oops with both these kernels as soon as it
> the
> > kernel loads the ide drivers (hd*)
> >
> > I am using ALI1542 chipset, K6/2 500 cpu
> > I have tried progressively disabling various ide options (cramfs,
> > acls tcq etc) to no effect
> >
> > I run ext3 compiled in
> >
> > This is on a base of RH9 with updated modutils from rawhide.
> >
> > The kernel apparrently compiles fine (no errors)
> >
> > Anyone any ideas what could be the cause of this (2.5.66 worked
> on
> > this machine and runs 2.4.21 fine)
> >
> > If its not a simple fix I will bugzilla it
>
__________________________________________________
Yahoo! Plus - For a better Internet experience
http://uk.promotions.yahoo.com/yplus/yoffer.html
This archive was generated by hypermail 2b29 : Tue Jul 15 2003 - 22:00:54 EST