Here are the problems I've found thusfar:
1. must boot with either acpi=off or pci=noacpi. If this isn't done,
half of things don't work right (eth0, USB mouse, etc) and when trying
to use such devices, I get a message to the effect of IRQ NN disabled
2. randomly some IRQs stop being delivered or something. I notice it
first in X when my USB mouse stops working. The PS/2 glidepoint mouse
keeps working fine. Most everything else on this IRQ (ohci-hcd, eth0)
all stop working -- sym53c8xx keeps working.
3. only 1/2 of my USB ports work. I have 6 ports, ports 1, 2, and 5
don't work.
4. if I try to use my i8x0 onboard sound (ALSA), I immediately lose
mouse/eth0/etc as above and I get a flurry of messages as will be described.
Now for the texts.
# cat usb-port1-mouse-in
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001403 POWER sig=k CSC
CONNECT
hub 1-0:0: port 1, status 501, change 1, 480 Mb/s
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:02.2: port 1 low speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 1 status 003402 POWER OWNER sig=k CSC
# cat usb-port1-mouse-out
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001002 POWER sig=se0 CSC
hub 1-0:0: port 1, status 100, change 1, 12 Mb/s
# cat usb-port2-mouse-in
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001403 POWER sig=k CSC
CONNECT
hub 1-0:0: port 2, status 501, change 1, 480 Mb/s
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:02.2: port 2 low speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 2 status 003402 POWER OWNER sig=k CSC
# cat usb-port2-mouse-out
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001002 POWER sig=se0 CSC
hub 1-0:0: port 2, status 100, change 1, 12 Mb/s
# cat usb-port3-mouse-in
ehci_hcd 0000:00:02.2: GetStatus port 3 status 001403 POWER sig=k CSC
CONNECT
hub 1-0:0: port 3, status 501, change 1, 480 Mb/s
hub 1-0:0: debounce: port 3: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:02.2: port 3 low speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 3 status 003402 POWER OWNER sig=k CSC
ohci-hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00010301 CSC
LSDA PPS CCS
hub 2-0:0: port 1, status 301, change 1, 1.5 Mb/s
hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
ohci-hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00100303
PRSC LSDA PPS PES CCS
hub 2-0:0: new USB device on port 1, assigned address 5
usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB-PS/2 Mouse
usb 2-1: Manufacturer: Logitech
drivers/usb/core/usb.c: usb_hotplug
usb 2-1: usb_new_device - registering interface 2-1:0
drivers/usb/core/usb.c: usb_hotplug
hid 2-1:0: usb_device_probe
hid 2-1:0: usb_device_probe - got id
input: USB HID v1.00 Mouse [Logitech USB-PS/2 Mouse] on usb-0000:00:02.1-1
# cat usb-port3-mouse-out
ehci_hcd 0000:00:02.2: GetStatus port 3 status 001002 POWER sig=se0 CSC
hub 1-0:0: port 3, status 100, change 1, 12 Mb/s
ohci-hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00030300
PESC CSC LSDA PPS
hub 2-0:0: port 1, status 300, change 3, 1.5 Mb/s
usb 2-1: USB disconnect, address 5
usb 2-1: unregistering interfaces
usb 2-1: hcd_unlink_urb dc5ef524 fail -22
usb 2-1: hcd_unlink_urb dc5ef268 fail -22
drivers/usb/core/usb.c: usb_hotplug
usb 2-1: unregistering device
drivers/usb/core/usb.c: usb_hotplug
ohci-hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00020300
PESC LSDA PPS
hub 2-0:0: port 1 enable change, status 300
The other ports are respectively similar.
# cat /proc/interrupts
CPU0
0: 1083773 XT-PIC timer
1: 3317 XT-PIC i8042
2: 0 XT-PIC cascade
5: 31286 XT-PIC sym53c8xx, ohci-hcd, eth0
8: 2 XT-PIC rtc
11: 6048 XT-PIC sym53c8xx, sym53c8xx, ehci_hcd, NVidia
nForce2
12: 61 XT-PIC i8042
14: 719 XT-PIC ide0
15: 9 XT-PIC ide1
NMI: 0
LOC: 1083344
ERR: 1039
MIS: 0
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : Unknown CPU Type
stepping : 0
cpu MHz : 1837.905
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3629.05
I'll put the lspci and dmesg and .config up on the web
(http://stuph.org/2.6.0-test1-issues) due to the size.
david
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jul 23 2003 - 22:00:27 EST