Re: IP multicast errors with linux 2.6.0-test2 and SiS900

From: Måns Rullgård (mru@users.sourceforge.net)
Date: Fri Aug 01 2003 - 07:20:07 EST


mru@users.sourceforge.net (Måns Rullgård) writes:

> I'm experiencing some strange behavior with IP multicast in linux
> 2.6.0-test2 on a SiS900 NIC.
>
> It will only receive multicast packets with destination address
> 239.1.1.*, unless I "ifconfig eth0 allmulti". With allmulti set, all
> multcast addresses are received. Setting promisc mode also does the
> trick.
>
> This isn't the intended bahavior, is it?

Update: 239.2.*.1 seems to work as well, but 239.1.1.1 doesn't work.

Also, if I join several multicast groups using the same port number,
all sockets receive packets from all groups. Maybe this is intended,
I can't find any details on this.

Hardware details:

$ lscpi
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 650 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 10)
00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
00:02.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 07)
00:02.3 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 07)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 90)
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
00:0a.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
00:0c.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS650/651/M650/740 PCI/AGP VGA Display Adapter

$ lspci -s3 -v
00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 90)
        Subsystem: Asustek Computer, Inc.: Unknown device 1455
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at a000 [size=256]
        Memory at e6000000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: <available only to root>

$ dmesg [in part]
sis900.c: v1.08.06 9/24/2002
eth0: ICS LAN PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xa000, IRQ 11, 00:0c:6e:40:b0:22.
eth0: Media Link On 100mbps full-duplex

-- 
Måns Rullgård
mru@users.sf.net

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Aug 07 2003 - 22:00:16 EST