Re: [2.6.0-test1] yenta_socket.c:yenta_get_status returns bad value compared to 2.4

From: Stefan Jones (cretin@gentoo.org)
Date: Sun Aug 03 2003 - 08:34:46 EST


On Sun, 2003-08-03 at 13:50, Russell King wrote:

>
> Hmm, so it looks like the hardware didn't report an insert event. Can you
> add a couple of printk()'s to yenta_events() to display the values of
> cb_event and csc please?

using

printk(KERN_DEBUG"yenta_events: csc= %04x cb_event= %04x\n",csc,cb_event);
in yenta_events

I get,

Stefan

Linux Kernel Card Services 3.1.22
  options: [pci] [cardbus] [pm]
yenta_events: csc= 0000 cb_event= 0001
yenta_events: csc= 0000 cb_event= 0001
yenta_events: csc= 0000 cb_event= 0001
yenta_events: csc= 0000 cb_event= 0001
yenta_events: csc= 0000 cb_event= 0001
Yenta IRQ list 0038, PCI irq11
Socket status: 30000417
parse_events: socket d56afc2c thread ce4db3c0 events 00000080
yenta_get_status: status=30000417
socket d56afc2c status 00000041
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x2c8-0x2cf 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
yenta_get_status: status=30000417

[ Still nothing on first insertion ]

yenta_events: csc= 0000 cb_event= 0006
parse_events: socket d56afc2c thread ce4db3c0 events 00000080
yenta_get_status: status=30000417
socket d56afc2c status 00000041
yenta_events: csc= 0000 cb_event= 0006
parse_events: socket d56afc2c thread ce4db3c0 events 00000080
yenta_get_status: status=30000411
socket d56afc2c status 000000c1
socket_insert: skt d56afc2c
yenta_get_status: status=30000411
socket_setup: skt d56afc2c status 000000c1
yenta_get_status: status=30000411
socket_reset: skt d56afc2c
yenta_get_status: status=30000419
yenta_get_status: status=30000419
orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
eth1: Station identity 001f:0006:0001:0003
eth1: Looks like an Intersil firmware version 1.3.6
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:09:5B:4A:B1:B6
eth1: Station name "Prism I"
eth1: ready
eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
yenta_events: csc= 0000 cb_event= 0000
[ repeated many times ..... ]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Aug 07 2003 - 22:00:21 EST