> Patrick,
>
> I enabled CONFIG_SCSI_LOGGING=y in kernel then i used
> scsi_mod.scsi_logging_level=0x140 and scsi_mod.max_scsi_luns=1 when
> booting the kernel from lilo.I can see some debug information scroll on
> the screen and i did see ID0 LUN0 get probed even the correct transfer
> rate for the SCSI disk is set.I forgot but isn't there a key sequence
> when pressed it will stop the screen output like pause/break key?
You might be able to get useful information without using a serial
console if you turn off your CDROM drives so they don't add extra output,
but your best bet is to use a serial console.
-- Justin- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 07 2003 - 22:00:24 EST