Having just upgraded to 2.4.21, the first time I tried to print, the
following happened. The printer started to print, but gave up after a
while and spat out just about 1" of image. Needless to say, it all worked
fine under 2.4.20.
Intel 82801BA based MB, running stock 2.4.21 (compiled with gcc 3.3.1)
with uhci driver (all on Debian testing)
This debugging code was introduced during 2.4.20->2.4.21, but I'm afraid I
don't know what the significance of it is. (Happens when td->dma_handle !=
(qh->element & ~UHCI_PTR_BITS) )
Can anyone tell me what's going on? I am happy to provide more information
as necessary.
Aug 6 18:45:19 ptal-mlcd: SYSLOG at /home/msp/src/debian/hpoj/hpoj-0.90/mlcd/
bp/ex/ExMgr.h:564, dev=<mlc:usb:PSC_750@/dev/usb/lp0>, pid=287, e=19
ptal-mlcd successfully activated, mode=1284.4.
Aug 6 18:45:22 kernel: [d7b0b120] link (17b0b092) element (166d9270)
[following lines all the same time]
kernel: Element != First TD
kernel: 0: [d66d9000] link (166d9030) e3 SPD Length=3f MaxLen=3f DT0 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c000)
kernel: 1: [d66d9030] link (166d9060) e3 SPD Length=3f MaxLen=3f DT1 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c040)
kernel: 2: [d66d9060] link (166d9090) e3 SPD Length=3f MaxLen=3f DT0 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c080)
kernel: 3: [d66d9090] link (166d90c0) e3 SPD Length=3f MaxLen=3f DT1 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c0c0)
kernel: 4: [d66d90c0] link (166d90f0) e3 SPD Length=3f MaxLen=3f DT0 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c100)
kernel: 5: [d66d90f0] link (166d9120) e3 SPD Length=3f MaxLen=3f DT1 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c140)
kernel: 6: [d66d9120] link (166d9150) e3 SPD Length=3f MaxLen=3f DT0 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c180)
kernel: 7: [d66d9150] link (166d9180) e2 SPD Length=3f MaxLen=3f DT1 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c1c0)
kernel: 8: [d66d9180] link (166d91b0) e3 SPD Length=3f MaxLen=3f DT0 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c200)
kernel: 9: [d66d91b0] link (166d91e0) e3 SPD Length=3f MaxLen=3f DT1 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c240)
kernel: 10: [d66d91e0] link (166d9210) e3 SPD Length=3f MaxLen=3f DT0 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c280)
kernel: 11: [d66d9210] link (166d9240) e3 SPD Length=3f MaxLen=3f DT1 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c2c0)
kernel: 12: [d66d9240] link (166d9270) e3 SPD Length=3f MaxLen=3f DT0 EndPt=1
Dev=2, PID=e1(OUT) (buf=15f5c300)
kernel: 13: [d66d9270] link (166d92a0) e0 SPD Stalled CRC/Timeo Length=3f
MaxLen=3f DT1 EndPt=1 Dev=2, PID=e1(OUT) (buf=15f5c340)
kernel: 14: [d66d92a0] link (166d92d0) e3 SPD Active Length=0 MaxLen=3f DT0
EndPt=1 Dev=2, PID=e1(OUT) (buf=15f5c380)
kernel: 15: [d66d92d0] link (00000001) e3 SPD IOC Active Length=0 MaxLen=3d
DT1 EndPt=1 Dev=2, PID=e1(OUT) (buf=15f5c3c0)
kernel:
kernel: printer.c: usblp0: nonzero read/write bulk status received: -110
Aug 6 18:46:16 kernel: [d7b0b0c0] link (17b0b062) element (166d9030)
kernel: Element != First TD
kernel: 0: [d66d9000] link (166d9030) e3 Length=7 MaxLen=7 DT0 EndPt=0 Dev=2,
PID=2d(SETUP) (buf=161364e0)
kernel: 1: [d66d9030] link (166d9060) e0 SPD Stalled CRC/Timeo Length=7ff
MaxLen=0 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=167dbf67)
kernel: 2: [d66d9060] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
kernel:
This last stanza is then repeated, every 41-160 seconds, presumably each
time CUPS tries again to print the data.
-- Peter Denison <peterd at marshadder dot uklinux dot net> Please use this address only for personal mail, not copied to lists gatewayed to news or web pages unless the addresses are removed.- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 07 2003 - 22:00:34 EST