You don't have driver for you ide chipset compiled in.
--bartlomiej
On Thu, 7 Aug 2003, Ian Chilton wrote:
> Hello,
>
> [Please cc me in on any replies]
>
>
> I am having problems getting a box into DMA mode with 2.4.21 and
> 2.4.22-rc1:
>
> [root@baloo:~]# hdparm -d1 /dev/hda
>
> /dev/hda:
> setting using_dma to 1 (on)
> HDIO_SET_DMA failed: Operation not permitted
> using_dma = 0 (off)
>
>
> Relevent dmesg stuff:
>
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> hda: C/H/S=19158/16/255 from BIOS ignored
> hda: WDC WD400JB-00ENA0, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: attached ide-disk driver.
> hda: host protected area => 1
> hda: 78165360 sectors (40021 MB) w/8192KiB Cache, CHS=77545/16/63
>
>
> Any ideas?
>
>
> Thanks!
>
> --ian
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 07 2003 - 22:00:39 EST